Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹26.4 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹29.7 L+₹2.4 L (8.90%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹34.5 L+₹7.2 L (26.5%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 |
Tender Value
₹34.5 L
EMD Value
₹69,000
Closing Date
7 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
SPL REPAIR TO BLDG NO P-67 AND P-68 AT MANASBAL UNDER GE 970 EWS
2023_MES_622266_1
GE 970 EWS-36/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹69,000
Yes
21 Dec 2023
9 Oct 2023
9 Nov 2023
9 Oct 2023
7 Nov 2023
24 Oct 2023
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 sqm n.exc 4 sqm each complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Supply and fixing 3-layer PP-R Polypropylene random copolymer pipes of 16mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed.
Supply and fixing 3-layer PP-R Polypropylene random copolymer pipes of 25mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.
Material & labour 75 mm thick PCC 1:3:6, type C-2, using 40 mm graded aggregates as in sub base etc, finished even and fair complete all as specified and directed.
Material & labour 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection, finished even and smooth complete all as specified and directed.
Material & labour for 25mm thick PCC (1:2:4) Type-B-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
M&L Hardcore of broken stone of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for 60 mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment with and including 25mm thick sand cushioning and dismantling old tiles complete all as specified and directed. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite 6) and demolition of old stone slab complete all as specified and directed.
Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 15mm thick in cement mortar (1:6) and demolition of old stone slab complete all as specified and directed. Note - Kota stone for step shall be in single piece.
All as per item No.22 above but in riser of steps, skirting, dado and pillar with and including 10mm thick backing coat in CM 1:4 -ditto-
2nd class hardwood plain solid, straight chowkat and frame, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
30mm thick flush shutters, solid core construction, with block board core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.
S&F Box type Steel window (Factory made ) outer frame made out ERW tube 'P' section 65mmx45mmx25mm and shutters of ERW tube 'P' section 50mmx35mmx20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (Internal side) with steel pintal hinges, steel handle 100 mm long, mild steel tower bolt 02 Nos on each shutter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.36 mm dia nominal dia of stainless steel wire cloth average width of aperture 1.40 mm dia and 4mm thick sheet glass window and 4mm figured glass for ventilators complete all as specified and directed.. Note : The quoted rate against the said item shall be deemed to include the following:- (i) One shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contact with bricks/ concrete surface. (ii) 04 Nos MS Steel Lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs. (iv) 0.36mm dia SS wire mesh (v) 4mm thick sheet glass - for window. (vi) 4mm thick figured glass - for vent. (vii) TD No CESZ/TD/1018/2011 Sheet 1/3 shall be applicable. (viii) 10mm square guard bars welded with frame.
S&F factory made 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and directed.
Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening, edges will be painted to match with printed sheet complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed
Material & labour 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc complete all as specified and directed.
S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed.
Material & labour MS butt hinges medium weight of size 100 mm fixed with screws complete all as specified and directed.
Material & labour 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
Material & labour 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
Material & labour 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
Material & labour 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
Material & labour aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed.
Material & labour aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
Material & labour preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .
Preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth , and applying one coat of synthetic enamel paint complete all as specified and directed .
Preparation of new steel surfaces on any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material & labour brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Material & labour rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth complete complete all as specified and directed.
Rendering 10 mm thick in CM 1:3 on concrete surface as in ceiling/landing etc, surface finish even and smooth without using extra cement with and including taking down cement or lime plaster of any description and preparing new plastered of ceiling and applying two coats of white wash complete all as specified and directed .
Material & labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of wall care putty complete all as specified and directed.
Material & labour for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over a coat of wall care putty complete all as specified and directed.
M& L for applying two coats of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall surfaces complete all as specified and directed. Make: Asian :apex ultima , Nerolac Suraksha
M& L for preparation of old plastered surface and applying two coats of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall surfaces complete all as specified and directed. Make: Asian :apex ultima , Nerolac Suraksha
Preparation of old plastered or un-plastered surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.
Anodised aluminiun snap grid frame work for false ceiling of size 605mm x 605mm with and including 6 mm thick non asbestos fibre cement building board and G.I hanger 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed.
S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specifed and directed.
Supply and fixing in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity ISI Marked incl 15 mm dia ball valve high pressure of PVC with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed
Supply & fix in repairs squatting pan WC Orissa pattern size 630mm x 450mm white with integral foot rest with and including 10 ltr capacity flushing cistern with flush pipe , PVC connection 450mm long with P or S trap and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.
Supply and fixing in repair Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, CP waste coupling complete all as specified and directed
Supply and fixing in repair for Soap dish, MS, CP of approximate size 160x160x90mm, complete all as specified and directed.
Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
S & F in repair 15 mm bore CP bib taps cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S & F in repair PVC connection commercial quality 450mm long with PTMT nuts of 15mm bore and fixed complete all as specified and directed
S & F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
Supply & fix in repairs 15mm bore brass wall mixer CP for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply & fix in repairs 15mm bore brass sink mixer CP for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S&F in repair health faucet assembly, brass, chromium plated consist of valve, sprayer, PVC flexible pipe for EWC suitable for 15mm bore pipe, complete all as specified and directed.
S & F in repair 15 mm bore two way angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repair brass chromium plated shower rose 65mm to 90 mm size with swivel joints, complete all as specified and directed.
S&F in repair PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall (110mm bore) complete all as specified and directed.
S&F in repair PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in tranches or in floors or wall (75mm bore) complete all as specified and directed.
S&F PVC (SWR) bend 110mm dia any radius complete all as specified and directed.
S&F PVC (SWR) bend 75mm dia any radius complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
Supply & fix in repair PVC (SWR) 75mm bore multi floor trap plain with grating including jointing with waste pipe with adhesive complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 110mm junction single (Single 'T') equal or unequal complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 75mm junction single (Single 'T') equal or unequal complete all as specified and directed.
S&F in repair Harrison rail (Curtain rod//drapery rod), 20mm dia, powder coated with and including fancy type PVC bracket 2 Nos of each opening and side stopper powder coated of required shape and size 2 Nos of each opening complete all as specified and directed
Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC casing and caping (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable (FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 80 here-in-before but switch socket out let 3 pin, 5 Amp on independent board with other switch.
All as per description of srl item No 80 here-in-before but socket out let 3 pin, 5 Amp on same board
All as per description of srl item No 80 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
All as per description of srl item No 80 here in before but using 4 sqmm (nominal area) PVC stranded copper conductor cable with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket combination, 15 Amps on independent board.
Switch piano flush button single pole one way 5 A, 240 V complete all as specified and directed.
Switch socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and directed.
Socket outlet 2 in 1, 3 pin, 5 Amp flush type, 240 V, complete all as specified and directed.
Switch socket combination 5/15A, 5 in 1, 3 pin, 240 volts complete all as specified and directed.
Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 240 volts complete all specified and as directed.
Fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.
Taking down unserviceable any type of main switch, DB's including MCBs incl wooden/GI/MS sheet board etc and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB DB TPN 4 way, 415 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
MCB SPN 63 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB TPN 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
Supply and fixing in repair energy efficient surface Mounted LED Luminaire 18/20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr complete all as specified and directed.
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 6 sqmm and one run of 6 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 6 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 10 sqmm and one run of 10 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Lagging on pipe of internal dia 20 mm, used in external water supply or plumbing all round with 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauge, 20mm mesh and finally covering with plaster of paris complete all as specified and directed.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type Each with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed
rafiq trading co
QAZI SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .