Repairing work of 4 nos suite and Stainless Steel railing of Kalyan Kutir Guest House at Digha in the district of Purba Medinipur during the year 2025-26

Taking out existing partition/ceiling of particle board, masonite board, ply board,soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.[concrete plaster will be paid separately] (a) 35 mm thick shutters (single leaf)

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. A) Upto 150mm thick.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) ii) Solvent based interior grade Acrylic Primer (b) Two coats

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under pecific instruction of Superintending Engineer) (Two coats) ii) Luxury Quality

Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected up to three decimals i) Sal : Malayasian

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] (iv) 12mm thick

(iv) 6mm thick)

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floor (i) Thickness of laminate 1.5mm

Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be thoroughly sprayed with chemical emulsion. (Payment will be made on the basis of outside measurements of doors and windows Ground floor

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) Ground floor

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long.

Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) ≤ 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of he tiles and laid over the mortar bed using 0.2 kg/sqm of hite cement used for joint filling with approved pigment as irected and removal of wax coating of top surface of tiles ith warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of aterials,Iabour and all other incidental charges complete rue to the manufacturer's specification and direction of ngineer-in-Charge. (Note: This work should not be xecuted without specific permission of Superintending ngineer) (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5 mm thick)

Supplying and fiing of decorative well patterend and designed as per direction ,high quality ,washable, durable, easy to maintained , eco friendly wall paper , including pasting on wall with good quality adhesive with a good deal of accuracy etc

Supplying fitting fixing I let Pattern curtain made with superior quality apporaved make otton cloth of approve Deign including macine stitching with plits best quality white synthetic with plits, best quality white synthetic lining at back side hanging frtom teak wood PU polish decorative drapry fittings,wooden sockets ss 25mm dia pipe fitted and fied with with ss IS mark screws all complete as per direction of engineer in charge. Opening size 2.05 m x 2.05 m

Opening size 1.65 m x 1.65 m

Add 18% extra in respect of GST on sl no. 1 to 14 of Rs. 461054.00

Add 1% extra in respect of Labour Welfare Cess on sl no. 1 to 14 of Rs. 544044.00