SPECIAL REPAIR TO ADM BUILDING NO P-20 AT INS UTKROSH AND SPECIAL REPAIR TO CONCEALED PIPELINE AND KITCHEN CUPBOARD TO BLDG NO P-409, P-410, P-411 AND P-412 AT PEREIRA ENCLAVE UNDER GE MINNIEBAY PORT BLAIR

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed by Engineer in Charge

Demolition of precast concrete work/ precast concrete block built in cement mortar including all quoins arches pillers etc complete all as specified and as directed by Engineer in Charge

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed by Engineer in charge

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engineer in Charge

Demolition of cement concrete (unreinforced) including tiles and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer in Charge

Taking up or down old GI water tubing 15/20 mm bore with fittings from trenches/walls and stacking at site including cleaning for refixing or removal to store complete all as specified and as directed by Engineer in Charge

Taking up or down old GI water tubing 25 or 32 mm bore with fittings from trenches/walls and stacking at site including cleaning for refixing in new or old position or credit to contractor complete all as specified and as directed by Engineer in Charge

Taking down existing chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each without taking off shutters from the frames complete all as specified and as directed by Engineer in Charge

Taking down existing chowkhats or frames not exc 1.5 sqm each with shutters(without taking off shutters from the frames complete all as specified and as directed by Engineer in Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer in Charge

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in Charge

S&F in repair aluminium flat iron work in wind ties scrow as directed incl all necessary drilling,bolting, riviting & etc complete all as specified and as directed by Engineer in Charge

S&F PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or on wall complete all as specified and as directed by Engineer in Charge

S&F PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or on wall complete all as specified and as directed by Engineer in Charge

S&F PVC (SWR) bends 110 mm dia etc complete all as specified and as directed by Engineer in Charge

S&F PVC (SWR) bends 75mm mm dia etc complete all as specified and as directed by Engineer in Charge

M&L for rendering 15mm thick cement plaster on fair faces of concrete block masnory in two layers, base layer 10mm thick in CM (1:6) and top layer 5mm thick in CM 1:4(with river sand) mixed with WPC as per manufacture' s instructions, finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge Note :- WPC shall be measured and paid seperately

M&L for rendering 10 mm thick on fair faces of bricks/concrete surface in CM(1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge

M&L for rendering to ceiling in 5 mm thick on fair faces of concrete surface in CM(1:3) finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge

Supply only water proofing compound

M&L for applying two coats of oil bound distemper over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and as directed by Engineer in Charge

M&L for applying two coats of oil bound distemper over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of ceiling complete all as specified and as directed by Engineer in Charge

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in Charge

S&F Aluminium anodised (minimum anodisation is 50 microns) Door/ window /ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills,aluminium snap beading,screws,handles,locking arrangements etc, complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge (Aluminium section shall be of make Jindal/Hindalco/indalco). (Note:-Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment.However coat of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, glass & aluminium wire cloth as application will be measured and paid separately as supplied only).

Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass , in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer in Charge

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed by Engineer in Charge

Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass , in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer in Charge.

S&F in repair stainless steel friction stay hinges 200 x19 x 1.90 mm of standard size complete all as specified and as directed by Engineer in Charge.

M&L for prepaing new or previously untreated steel Surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer in Charge. Note:-Rate quoted including of scaffolding at any height

M&L for complete removal existing wall surface applying two coat of oil bound distemper over a coat of alkali resistant priming paint including preparation of old plastered surfaces of wall complete all as specified and as directed by Engineer in Charge.

M&L for applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion to old painted surface of wall including preparation complete all as specified and as directed by Engineer in Charge.

S&F in repairs aluminium anodised snap grid false ceiling of standared aluminium section of size 38mm x 25mm x 24mm , weight 0.363 Kg/RM main/cross tees of size 38.5mm x 25mm x 1.4mm weight 0.24 Kg/RM, Grid size n.Exc 610mm x 610mm suspended false ceiling with 4mm dia Gi wire interval n exc 600mm centre to centre for main & cross tees fixed to roof slab , roof truss fixed with suitable size MS hook and fastening bolts etc incl E board classic 4 mm thick oceanic sheer of size n exc 610mm x 610mm size fixed in ceiling with clips to aluminium snap grid and preparation of new surface and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed by Engineer in Charge.

M&L for in framed work as in brackets , angles , or tees with web and flanges cut to shape , drilled ans counter sunk for scrow , incl bending and welding angles as necessary gusset plates, rails braces, etc. covering and fixing complete all as specified and as directed by Engineer in Charge.

M&L for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in?cluding cleats, brackets, etc Fe-410-w(Gde-E-250)quality-A complete all as specified and as directed by Engineer in Charge.

S&F Rolled sections/tubular MS pipes as in cross beams, hip and jack rafters, vertical posts, purlins where connected to common rafters fixed with angle cleats or similar work including welding and all necessery works complete all as specified (Fe-410-W-(Gde-E-250) quality A complete all as specified and as directed by Engineer in Charge. Note:-The rates are inclusive of Scaffolding as required

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment incl necessary welding complete all as specified and as directed by Engineer in Charge.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed CM(1:6) complete all as specified and as directed by Engineer in Charge.

M&L for glazed ceramic tiles of size 450x 300x 7 to 8 mm thick on vertical surfaces as in skirting , dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10 mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-charge.

M & L for glazed Ceramic Tiles, Coloured, of size 300X 200X 7 mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed of 10 mm thick in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors/ vertical surfaces / rises /bullnosed treads with grey cement including screed bed or bedding layer of motar 15 mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor with proper clamping arrangements complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor with proper clamping arrangements complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 32 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor with proper clamping arrangements complete all as specified and directed by Engineer-in-charge.

S&F Brass Elbow CPVC pipe outer dia 20 mm complete all as specified and directed by Engineer-in-charge.

S&F Brass Elbow CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F Brass Tee CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F Male brass threaded adopter CPVC pipe outer dia 20 mm complete all as specified and directed by Engineer-in-charge.

S&F Male brass threaded adopter CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F Tank adapter CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F Tank adapter CPVC pipe outer dia 32 mm complete all as specified and directed by Engineer-in-charge.

S&F union CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F union CPVC pipe outer dia 32 mm complete all as specified and directed by Engineer-in-charge.

S&F ball valve CPVC pipe outer dia 25 mm complete all as specified and directed by Engineer-in-charge.

S&F ball valve CPVC pipe outer dia 32 mm complete all as specified and directed by Engineer-in-charge.

S&F in repair Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair 1000 Litres rotaional moulded polye?thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including tank cover complete all as specified and directed by Engineer-in-charge.

S&F in repair CP towel rail, 20mm dia, 60 mm long fixed with CP screws and wood cleats / rowel plug in wall , complete all as specified and directed by Engineer-in-charge.

S&F in repair Pillar taps, cast copper alloy, chromium plated, fancy type heavy duty , 15 mm dia , with capstan head ,screwed down high pressure, with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair to Bib taps, cast copper alloy heavy duty ,15 mm dia,chromium plated , fancytype screwed down iron pipe and fixed etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed , complete all as specified and directed by Engineer-in-charge.

S&F in repairs to two way bib taps, cast copper alloy, 15 mm dia, chromium plated, fancy type,screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs 32/40mm dia PVC flexible Waste Pipe, 750mm long fixed to wash hasnd basin or sink complete all as specified and directed by Engineer-in-charge.

S & f in repairs PVC connection 15mm size with CP brass nuts of length 600mm complete all as specified and directed by Engineer-in-charge.

S & F in repair 10 Ltrs capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, flot and handle including brackets and 32mm PVC bend complete all as specified and directed by Engineer-in-charge.

S & F in repairs of vitreous china wash hand basin of size 550 x 400mm white flat back including chromium plated, pillat tap, waste coupling including brackets chromium plated, pillat tap, wasre coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed by Engineer-in-charge.

S & F in repairs vitreous China wash down water closet pan ( Pedestal pattern) EWC white in clour with and incl plastoic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and directed by Engineer-in-charge.

S & F in repairs vitreous china urinal, half stall long type of size 315 x 375x 620 mm colour white incl urinal spearder of PTMT of any colour for fixing with 15 mm dia pipe (minium weight 60 gms) complete all as specified and directed by Engineer-in-charge.

S & F in reapir soild PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening complete all as specified and directed by Engineer-in-charge.

S & F in repair factory Made soild PVC Moulded Door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.

S & F 75 mm size medium weight butt Hinges, cold rolled, stainless steel including fixtures complete all as specified and directed by Engineer-in-charge.

S & F extruded aluminium alloy handle fabricated type anodised 100 mm long complete all as specified and directed by Engineer-in-charge.

S & F Aluminium anodised barrel tower bolt of size 150mm size of extruded section complete all as specified and directed by Engineer-in-charge.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pilliers,window-cills,cooking platforms and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-charge.

M&L for precast cement concrete block masonry with PCC solid blocks in 1:3:6, type C1 using 20 mm graded stoneaggregates,exc 10 mm in width and set in CM 1:4 complete all as specified and directed by Engineer-in-charge.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and directed by Engineer-in-charge.

M & L for reinforced cement concrete 1:2:4 (Nominal Mix) in Chajjas, slabs and similar type of work complete all as specified and directed by Engineer-in-charge.

Dismantling any type of boarding with wooden frame work as in kitchen cabinet, shutter, drawar and similar work including builder hardware complete all as specified and directed by Engineer-in-charge.

S & F 18 to 20mm thick HDF board including decorative laminations on bothsides, on side plain and another side decroative fixed to frame work complete all as specified and directed by Engineer-in-charge.

M & L first class hard wood for wooden beading , cupboards / shelves / wardroble / wall panalling exc 6 & not exc 13 Sqm complete all as specified and directed by Engineer-in-charge.

S & F 100 mm brass handles, cast type, polished bright complete all as specified and directed by Engineer-in-charge.

S & F 100 mm size hasp and stable, stable , safty tyoe, brass with mild steel hinges pin including bolt to hinge plate with scrows complete all as specified and directed by Engineer-in-charge.

S & F contunoius (piano)hinges, mild steel, bright finish or electrogalvanished and with of flaps 30mm (When open) complete all as specified and directed by Engineer-in-charge.

S & F Teak wood lipping frame 6mm thick for 18/19mm width fixed with nails / screws complete all as specified and directed by Engineer-in-charge.

S & F 2nd class hard wood for plain, solid, straight, chowkats and frames, wrought, framed reabeated the soild rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-charge.

S & F Magnet catch for cup boards of brass body and skirting plate complete all as specified and directed by Engineer-in-charge.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application including one coat of aluminium paint over the top surface complete all as specified and directed by Engineer-in-Charge. Note:Roof Treatment should be carried out by approved agency

M&L for dual coat of aluminium paint over the top surface of APP on Roof after preparation over 10cm in width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for applying a coat of blown type bitumen at the rate of 1.50 kg per sqm and binding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed by Engineer-in-Charge.

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.

S&F in repair heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg complete all as specified and as directed

S&F in repair heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 30 kg complete all as specified and as directed

S&F in repair stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed

S&F in repair 75mm long Modular Stainles steel decorative handles complete all as specified and as directed

S&F in repair stainless steel pull out Cuttlery Basket of size 21"x20"x4" of min 304 grade all as directed

S&Fin repair stainless steel Plain pull out Basket of size 21"x20"x6" of min 304 grade all as directed.

S&F in repair stainless steel Plate Basket of size 21"x20"x8" of min 304 grade all as directed.

Fixing only in repairs Bib Cock/Stop Cock/Mixers including cleaning, removing of blockages etc. of any type and size including replacement of brass spandle if required all as specified. Note : Brass spandle will be paid separately

S&F in repair vitreous china white heavy duty counter top wash hand basin of 520x440x180mm size, including waste coupling and waste pipe complete all as specified and directed.

S&F in repair 15mm bore fancy type CP Centre hole Wash Basin Mixure high quality without popup waste with 450mm braided hoses complete all as specified and directed.

S & F in repair CP Health Faucet high quality with 8mm dia, 1.2 Meter long flexible tube & wall hook complete all as specified and directed.

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and directed.

S&F in repairs 500 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs 1000 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

M & L for taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, complete all as specified and as directed

M & L for point wiring with 1.5 Sq.mm (nominal area) pvc unsheathed multi strandard copper conductor pvc insulated 1100 volt FR-LSH grade multistranded cable drawn through and including PVC casing capping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green color as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-

(a) One light /fan point controlled by one 05Amps switch complete all as specified and as directed

(b) one 3 pin 5 amp switch socket out let independent complete all as specified and as directed

(c) One 3 pin 5 amp switch socket out same board complete all as specified and as directed

All as per item No 109.00 above but using 2.5 Sqmm size stranded copper conductor cable for one 16 Amp switch socket outlet point on independent board complete PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified and directed by Engineer-in-Charge.

All as per item No. 109.00 above but using 4.0 Sqmm size stranded copper conductor cable for one 16 Amp switch socket outlet point on independent board including 4.0 Sqmm multistranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

S&F socket out let 2 in 1 ,3 pin 5 Amps on the same board with other switch complete all as specified and directed by Engineer in-charge.

Supply & fix switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and directed by Engineer in-charge.

S&F switch piano flush type, single pole one way, 5 Amp complete all as specified and directed by Engineer in-charge.

S&F ceiling fan regulator electronic Step type, solid state, , 240 volts, complete all as specified and directed by Engineer in-charge.

S&F Ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed by Engineer in-Charge

S&F LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, extruded aluminum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Flicker free, high efficiency and robust industrial batten family suitable for Surface, Wall and Conduit mounting. The product family offers dimmable and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable sizecomplete all as specified and directed by Engineer in-charge.

S&F Ceiling fan AC single phase 240 V of size 1200 mm sweep metal body and blade, powder coated metallic finish,complete all as specified and directed by Engineer in-charge including taking down old fan and depositing to MES store

S&F Exhaust fan AC single phase 240 V of size 300 mm sweep with louvre specially designed by kitchen in domestic ventilation.plastic body and blade, finish high quality engineering plastic heavy duty motor, protective bird guard,complete all as specified and directed by engineer incharge including taking down old fan and depositing to MES store

S&F in replacement of Street light fitting LED type, 30 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm / Watt, and accessories complete mounted on 25/40 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall, connection complete all as specified and directed by Engineer in-charge..

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and directed by Engineer in-charge..

S&F MCB 32 Amps, DP 240 Volts ,breaking capacity 10 KA complete all as specified and directed by Engineer in-charge..

S&F MCB 6 to 32 Amps, SP, 240 Volts ,breaking capacity 10 KA complete all as specified and directed by Engineer in-charge..

M&L for sub main wiring complete with 2x1.5 sqmm , single core , multi stranded copper conductor FR-LSH PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC Casing Capping in surface /PVC conduit in concealed/surface (as required) along walls roofs etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer in-charge at site.

M&L for sub main wiring complete with 2x2.5 sqmm , single core , multi stranded copper conductor FR-LSH PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC Casing Capping in surface /PVC conduit in concealed/surface (as required) along walls roofs etc including 2.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer in-charge at site.

M&L for sub main wiring complete with 2x4 sqmm , single core , multi stranded copper conductor FR-LSH PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC Casing Capping in surface /PVC conduit in concealed/surface (as required) along walls roofs etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer in-charge at site. Note for item Nos :125 to 127 :- (i) All three wire/cable(passé, neutral and earth) should be run through for each individual circuit from the DBs. (ii) Two runs of cable and earth conductor be measured as one length)

S&F inreplacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and directed by engineer incharge..

Supply and install in repair hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed by Engineer in-charge..

Materials and labour in repair for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm by means of bolts, nuts, check nuts and washers of GI or steel, GI wire proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.

M/s P.A.S. Construction

M/s J. M. Enterprises