Construction work of boundary wall for the security of warehouse in Sultanpur district

Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne rollerwooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks,marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m 2.2.1

Providing and laying in position cement concrete of specified grade excludingthe cost of centering andshuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 40 mm nominal size) 4.1.6

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All workup to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mmnominal size) 5.1.2

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work above plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 5.6A

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.1 Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of formColumns, Pillars, Piers, Abutments, Posts and Strutscolumn 5.9.6

Centering and shuttering including strutting, propping etc. and removal of for beam 5.9.5

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: 6.2.2 Cement mortar 1:6 (1 cement : 6coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level6.13.2 Cement mortar 1:4 (1 cement :4coarse sand)

12 mm cement plaster of mix : 1:6 (1CEMENT : 6 COURSE SAND) 13.4.2

Steel work welded in built up sections/ framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required. 10.25.1 In stringers, treads, landings etc. of stair cases, including use of chequeredplate wherever required, all complete

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR 13.80

Finishing walls with Acrylic Smooth exterior paint with Silicone additives of required shade 13.112.1

Please Enable Macros to View BoQ information