CREATION OF 63 KVA SUB STATION TO MUNCIPAL COMMITTEE OFFICE SHOPIAN FROM HOT LINE

Amount

Supply,Errection, testing & commissioning of 63 kVA,11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate

Supply,Errection, testing & commissioning of ST poles 9 mtr long 410-SP-33 with base plate and cap including transportation as per REC Standard

Supply,Loading, Transportation, Errection, testing & commissioning of ST poles 8 mtr long 410-SP-15 with base plate and cap including transportation as per REC Standard

Supply, Transportation, Laying, stringing and binding of conductor including joints with PG clamps of required size 30 mm2 ACSR ( Weasel)

Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete for (9mtr poles)

Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum per pole for ( 8 Mtr)

Supplying and erection of GI channel (100x50x6 mm) ,(75x40x6 mm) , GI Angle( 50x50x6 mm), 50X50X6 mm angle support including clamps for Sub-Station Frame as per REC approved Drawings.

Supply,Installation testing & commissioning of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

Supply and Installation of 11KV D.O FUSE SET 3 Phase 400 Ampere Horn Gap

Supply and Installation of 11 KV LA SET 9 KVA ,10 KA,LA WITH Polymer ,Porcelain Housing Station Type

Supply and Installation of LT Distribution Box for 63 kVA DTR with 100 Amp MCCB 3P 16 kA for incomer & 100 Amp MCCB 3P 16 kA 1 No. and 63 Amp MCCB 3P 16 kA 1 No.s for Outgoing Circuits

Supply and Installation of 185 mm² Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type

Supply and Installation of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply and Installation of Al Thimbles

Supply and Installation of GI Nuts & Bolts

Supply,Installation testing & commissioning 35 mm² AB (HT) Cable (3x35+1x35 mm²) XLPE

Supply and Installation of Suspension / Tension Clamp with eye Hook

Providing and Fixing of 11 KV pin insulator Complete (Polymer/Porcelain) 5 KN With Pins

Supply,Installation testing & commissioning of 11kV Outdoor Heat Shrinkable Cable Termination Kits

Providing and fixing of Danger Board

Providing and fixing of Anti-climbing Devices with clamps

Painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Supply and Installation of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Supply,Installation testing & commissioning of LT Prodigy Meter

Supply and installation of LT Shackle insulators with GI back clamps to be fixed without drilling/punching of poles on ST poles.

Supply and Installation of Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Identification of assets by marking of Transformer with white paint & marking of poles with Black paint at a height of 2.40 mtr from ground level. (Note : Mention Name of Scheme , Implementing Agency (JKPDD), Year of Implementing (2022-23)

Geo Tagged Photographs of high resolution (Pre and Post Photographs) Both hard and soft copy (for e-compendium) 4 Photographs Per site

M/S S.B.ELECTRICALS

southern

UBAID SUPPLIERS AND CONTRACTORS