Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.9 L+₹98,210 (3.08%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹36.3 L+₹4.4 L (13.7%)Rejected-Finance GANDHI CHOWK MANIPURA JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹36.7 L+₹4.8 L (15.1%)Rejected-Finance JAISALMER | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹36.9 L+₹4.9 L (15.5%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
Repair to BR Assets Works and other Misc Works in MD Accn and Zone-I at Mil Stn Jaisalmer
2022_MES_544396_1
8223/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹84,000
Yes
8 Oct 2022
10 Aug 2022
9 Sept 2022
10 Aug 2022
7 Sept 2022
24 Aug 2022
60 days
Amount
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge.
M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring / hardstanding & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.
M& L for PCC 50mm thick (1:3:6) type C1 (using 20mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even and fair without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
S & F chequered cement concrete tiles 20cm X 20 cm X 25mm thick with grey cement and pigments,set jointed in neat cement slurry as in floors/path etc laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-charge.
M&L for non skid ceramic tiles, coloured, exterior grade 300 x 300 x 10mm (Endura from Johnson or equivalent) laid over and including screed bed in CM 1:6, 15 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and roughening of exc concrete surfaces complete all as specified and directed by Engineer-in-charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, joint free non skid tiles laid over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-charge.
M&L for vetrified ceramic coloured tiles 9 to 10 mm thick area of each tile not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement laid over and including 15mm thick screed bed in CM 1:6 all as directed (size 600mm to 600mm) complete all as specified and directed by Engineer-in-charge.
M & L non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match the tiles, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.
M & L glazed ceramic coloured tiles (450x300mm)x 7mm thick joint free in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 10mm thick rendering in CM 1:4 of backing coat etc complete all as specified and directed by Engineer-in-charge.
M&L for special treatment for sunken portion of WCs/bath and toilet executed in the following stages :- Stage 1:- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete. Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr Fixit or its equivalent make as approved in the proporation/quantity all as per manufacturer's instrucitons. Stage 3:- Apply two coats of water proofing elastomeric liquid membrane of Dr Fixit or by brush application of STP or its equivalent make as approved (The surface after painting one coat shall be allowed to dry for 8 hours before application of next coat) all as per Manufacturer's instructions. Stage 4: Rendering 10mm thick in CM 1:3 mixed with integral water proofing chemical of Dr Fixit or its equivalent make as approved in the proportion/quantity all as per Manufacturer's instructions.
Item No. 13.00 Contd... Stage 5: All CI joints shall filled with mixture of cement fine sand and shalicrete R of STP Ltd or integral water proofing chemical of Dr Fixit or its equivalent make as approved all as per Manufacturer's instructions. Stage 6: Making holes in wall and fixing 600mm long 20mm dia medium grade GI spout for draining the surplus water if any. Stage 7: Carry out ponding test for 72 hours to ensure water tightness of rapaired sunken portion. Stage 8: Sunken floor shall be filled with lean cement concrete PCC (1:5:10) type E2 (using 40mm graded stone aggregate) after satisfactory passing of above mentioned treatment by Engineer-in-charge.
Taking up or down steel tubing and connections of following size all as directed by Engg-in- Charge :-
(a) 15 mm bore
(b) 20 mm bore
S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors of following sized :-
(a) 15 mm bore
(b) 20 mm bore
Refixing old steel tubing including cleaning and connections in new or old position (Wall, ceiling, floors etc) of the following size :-
(a) 15 mm bore
(b) 20 mm bore Note :- Serviceable material obtained from Ser item No. 14 shall be used for fixing.
S&F, in repair, tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-charge.
S&F in repair Swivel shower rose 75mm size with arm 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed by Engineer-in-charge.
S&F in repair CP grating (with & without hole) for Nahani trap and floor trap of size 100 mm dia complete all as specified and directed by Engineer-in-charge.
S&F in repair PVC connection pipe for WHB, cistern, gysers etc of size 15 mm dia and 450 mm long complete all as specified and directed by Engineer-in-charge.
S&F in repair PVC seat cover black/white closed pattern with flat bottom and mild steel CP or aluminium hinging device complete all as specified and directed by Engineer-in-charge.
S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with necessary P/S Trap and complete all as specified and directed by Engineer-in-charge.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests with 'S' or 'P' trap (excluding flushing cistern and flush pipe) size 580mmX440mm white including taking down old one or as directed by Engr-in- Charge
S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long and complete all as specified and directed by Engineer-in-charge.
S&Fin repair wash hand basin vitereous china flat back size 550 x 400 mm white incl CP waste coupling waste pipe brackets complete all as specified and directed by Engineer-in-charge.
S&F in repair CP bib taps 15 mm dia of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed complete all as specified and directed by Engineer-in-charge.
S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster from brick or concrete wall surfaces including raking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engineer-in-charge.
M&L rendering 15 mm thick on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair complete all as specified and directed by Engineer-in-charge.
M&L for preparation of newly plastered surfaces and apply two coats of cement based paint over a coat of cement primer complete all as specified and directed by Engineer-in-charge.
M&L preparation of new plastered surfaces of any description and apply two coats of oil emulsion distemper over a coat of putty on wall for making uniform smooth surface and primer distempering complete all as specified and directed by Engineer-in-charge.
Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 finished the surface with existing specification complete all as specified and directed by Engineer-in-charge.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tubes, S&F in opening as per specification & drawing given in SSR 2020.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.
S & F aluminium anodized tower bolt 150mm size complete all as specified and directed by Engineer-in-charge.
S & F Butt hinges Aluminum 100 mm type C21 complete all as specified and directed by Engineer-in-charge.
S & F aluminium handle 125 mm cast type anodized complete all as specified and directed by Engineer-in-charge.
Resecuring without taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-charge.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 and n exc 2 sqm each complete all as specified and directed by Engineer-in-charge.
S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-charge.
S&F in repair MS powder coated drapery rod 25mm dia decorative manner all as per sample complete all as specified and directed by Engineer-in-charge.
S&F in repair, 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding if required for fixing in case of pressed steel chowkat complete all as specified and directed by Engineer-in-charge.
S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as specified and directed by Engineer-in-charge.
S& F in repair of galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples fixed complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.
S&F in repair, aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.
S&F in repair for floor spring double action hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.
S&F in repair, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required complete all as specified and directed by Engineer-in-charge.
Taking down unserviceable rolling shutter of any description any size omplete all as specified and directed by Engineer-in-charge.
S&F steel rolling shutters of 1.25 mm thickness laths without ball bearing (push pull or manual type) as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete all as specified and directed by Engineer-in-charge.
All as per item No. 55.00 above but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engineer-in-charge.
Dismantling (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified & directed by Engineer in charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-charge.
Dismantling wrought iron or mild steel work of any description not othervise provided for complete all as specified and directed by Engineer-in-charge.
S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 complete all as specified & directed by Engineer-in-charge.
Taking down unserviceable Collapsible steel gates of any description any size height upto 4 mtrs complete all as specified and directed by Engineer-in-charge.
S&F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engineer-in-charge.
Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.
M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.
M& L Providing (1:2:4) type B-1 (20mm graded stone aggregate) precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), withplain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-charge.
S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including 12 mm medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.
Dismantling/Demolition of existing roof terracing of cement/brick concrete(un-reinforced) and existing water proofing treatment of any thickness in any position on top of roof of building, cleaning surface of roof with brush/mechanical brush and with water throughly to romove all dust/dirt and loose particles to expose bare concrete roof slab and romoval of rubbish/demolished material out side MD land complete all as specified and directed by Engineer-in-charge. Note : Demolition should be done by chiselling.
M&L for PCC (1:2:4) B-0 (using 12.5 mm graded stone aggregate) as in levelling padding course over RCC roof surface including rounded or chamferred on edges etc., with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope complete all as specified and directed by Engineer-in-charge. (Note :- Supply only water proofing compound shall be measured & paid separately).
Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge.
M&L for providing 3 mm thick APP modified memberane over RCC roof with the following specifiations :-
ITEM NO. 71.00 CONTD... (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :- (i) Membrane weight >3.6 Kg/Sqm. (ii) Net wooven polyster weight >160 gm/Sqm (iii) Softening point of membrane > 150o C (iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction(vi) Elongation > 30 % (vii) Impermeability under water pressure > 3 Kg/Sq cm
ITEM NO. 71.00 CONTD... Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane. (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
MARUDHARA CONSTRUCTION COMPANY
BHAGWATI CONSTRUCTION
M/s Shri Inder Construction Company
Leelashah Enterprises
M/S MAYA CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .