PERIODICAL SERVICES IN VARIOUS BLDGS IN OMQ AREA, REPAIR/MAINT OF EXTERNAL FINISHES INCLUDING CAMOUFLAGE PAINTING OF VARIOUS TECHNICAL ACCN AND REPAIR/REPLACEMENT OF CI/DI NETWORK OF WATER SUPPLY LINE IN TECHNICAL AREA AT AF STN HASIMARA

Amount

M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash to walls including cornices, complete all as specified and directed.

M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash to ceiling, complete all as specified and directed.

M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for preparing old decorated surface of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying two coats of distemper oil emulsion, complete all as specified and directed.

M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying one coat of cement base paint, complete all as specified and directed.

M & L for preparing old decorated surface of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying two coats of cement base paint, complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) (1st grade quality), complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) (1st grade quality), complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for preparing old decorated surface of walls and applying one coat of weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed.

M & L for complete removal of existing treatment of any type from walls and applying one coat or more coats of wall care putty on walls/ceilings to obtain a smooth surface including making good any undulations on the surfaces and applying two coats of distemper oil emulsion, complete all as specified and directed.

M & L for obliterating old writing of any description, not exceeding 0.1 Sqm, with synthetic enamel paint to match existing work, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for writing stops, commas, short lines, dashes, hyphens, brackets etc with synthetic enamel paint (1st grade quality), complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises, complete all as specified and directed.

Material & labour for rendering 15mm thick (10 + 5mm)in cement mortar (1:4) finished even and smooth (without using extra cement) mixed with liquid water proofing compound as per manufacturer’s instructions in top layer, complete all as specified and directed. (Note : WPC will be measured & paid separately)

Supply only liquid water proofing compound of approved quality (ISI marked) , complete all as specified and directed (Make : CICO No 1/SIKA/ACCO PROOF/Dr. FIXIT)

Material and labour rendering 10mm thick plaster in CM (1:6) on fair faces of brick or concrete, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of primer over a coat of 1mm thick wall putty on wall including preparation of new surfaces of walls, complete all as specified and directed.

M & L for complete removal of existing treatment on walls, complete all as specified and directed.

M & L for finishing walls with acrylic smooth exterior paint of shade/pattern-deep green/camouflage as directed (two or more coats applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm), complete all as specified and directed.

M & L for preparation of old painted surfaces of wall, chajja, fascia, cornices, parapet etc and applying one coat of exterier emulsion paint, complete all as specified and directed.

M & L for plaster of any thickness in cement mortar (1:3), not exceeding 1 Sqm each patch, on brick walls, finished even and smooth without using extra cement including taking down old cement plaster on brick walls, concrete surfaces, raking out joints, hacking for key, scrubbing down with water etc and finished the surface matching to existing colour finish, complete all as specified and directed

M & L for preparation of old treated steel surfaces of roof of any description over 10cm girth or width and applying one coat of antisol roof paint, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, without damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

M & L for cutting of road/hardstanding/PCC etc for laying of pipe line not exceeding 90cm below ground level and width not exceeding 60cm and returning filling in and removing of surplus material to a distance n.exc 50m, complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) for making good to disturbed surface of road hard standing etc, complete all as specified and directed.

Taking up or down CI 150mm bore water mains(including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed. (Excavation and earthwork shall be measured and paid seperately).

All as per item No.34.00 above, but CI 100mm bore water mains, complete all as specified and directed.

All as per item No.34.00 above, but CI 80mm bore water mains, complete all as specified and directed.

Relaying only old existing CI pipe line of size 150mm bore obtained from taking down, complete all as specified and directed.

Relaying only old existing CI pipe line of size 100mm bore obtained from taking down, complete all as specified and directed.

Relaying only old existing CI pipe line of size 80mm bore obtained from taking down, complete all as specified and directed.

M & L for 80mm bore, ductile iron pipe (K-7), socket and spigot end as per IS:8329 with internal cement mortar linning and external bitumen coating for potable water supply with rubber ring joints including cost of rubber rings as per IS:5382 (1985), giving satisfactory hydraulic field testing and commissioning as per technical specification etc laid in trenches, complete all as specified and directed. (Note : Excavation and earth work shall be measured and paid separately under respective items in this schedule).

All as per ser item No. 40 here in above but 100mm dia, complete all as specified and as directed.

All as per ser item No. 40 here in above but 150mm dia, complete all as specified and as directed.

M & L for making good pipeline breakdown of CI pipe of 80mm dia by making lead joint with lead and spun yarn and moulding clay including taking up/down pipe using chain pulley or rope and excavation in any type of soil including returning filling and removal of soil and testing of pipe line, complete all as specified and as directed. Note - Material and fitting including pipeline as required shall be measured and paid seperately.

All as per ser item No. 43 here in above but 100mm dia, complete all as specified and directed.

All as per ser item No. 43 here in above but 150mm dia, complete all as specified and directed.

All as per ser item No. 43 here in above but 200mm dia, complete all as specified and directed.

M & L for making good pipeline breakdown of DI pipe of 80mm dia by making rubber joint with rubber seal gasket joint including taking up/down DI pipe using chain pulley or rope and excavation in any type of soil including returning filling and removal of soil and testing of pipe line, complete all as specified and directed. Note - Material and fitting including pipeline as required shall be measured and paid seperately.

All as per ser item No. 47 here in above but 100mm dia, complete all as specified and directed.

All as per ser item No. 47 here in above but 150mm dia, complete all as specified and directed.

M & L for tyton ring rubber joint of best quality (ISI marked) suitable for ductile iron pipe for 150mm dia pipe, complete all as specified and directed.

M & L for tyton ring rubber joint of best quality (ISI marked) suitable for ductile iron pipe for 100mm dia pipe, complete all as specified and directed.

Supply and fix in repair GI flange for 80mm bore pipe, heavy duty with suitable size nuts and bolts and double washers including 6mm thick rubber gasket including taking out unserviceable flange, complete all as specified and directed. Make: TATA/JINDAL/SURYA ROSHNI/ PRAKASH

S&F 80mm dia sluice valve flanged end of class PN 1.6 (IS-14846) with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out u/s, complete all as specified and directed. Make:- Kirloskar/Upadhyay/Venus/BIR/RMCO

S&F 100mm dia sluice valve flanged end of class PN 1.6 with brass spindle and hand wheel including necessary new gasket, nuts and bolts, washer etc. including taking out u/s, complete all as specified and directed. Make:- Kirloskar/Upadhyay/Venus/BIR/RMCO

S&F 150mm dia sluice valve flanged end of class PN 1.6 with brass spindle and hand wheel including necessary gasket, nuts and bolts, washer etc. including taking out u/s, complete all as specified and directed. Make:-Kirloskar/Upadhyay/Venus/BIR/RMCO

S & F in repair gun metal gate/globe valve (screwed) with iron wheel head, screwed both ends suitable for fixing with pipe of outer size 50mm dia, complete all as specified and directed. Make: Zoloto/Leader/Scud/Kirloskar/RMCO

All as per ser item No. 56 here in above but 40mm dia, complete all as specified and directed.

All as per ser item No. 56 here in above but 25mm dia, complete all as specified and directed.

M & L for run lead joints in position for cast iron spigot and socket ends for size 200mm dia pipe, complete all as specified and directed.

All as per ser item No. 59 here in above but 150mm dia, complete all as specified and directed.

All as per ser item No. 59 here in above but 100mm dia, complete all as specified and directed.

All as per ser item No. 59 here in above but 80mm dia, complete all as specified and directed.

M & L for upto 200mm bore DI fitting for bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) tee pieces single branch. "Y" junction, double branch, cross (flange sockets or socket and spigot) collars, caps and plugs, complete all as specified and directed. Note:- Excavation of any type soil, removing and returning filling will be included in quoted rate.

Replacement of unserviceable water pressure gauge with new pressure gauge capacity 7 kg/sqcm to 10 kg/sqcm, complete all as specified and directed. (Make : RMCO/OASIS).

M&L for repair/servicing of existing sluice valve of 150mm size after dismantiling of upper cover, removing the spindle and make it leak proof by replacing the gland packing, nuts, bolts with washer and gasket of both side, complete all as specified and directed. Note :- An amount of Rs.49020.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ANNI ENTERPRISE

M/S. VINITA CONSTRUCTION

CONSTRUCTION SHELTER

M/S I P GROUP

MAJUMDER ENTERPRISE

M/S SARKAR ELECTRIC

M/S SANMILAN NANDI