REPAIR TO ROADS UNDER AGE B/R-II UNDER GE (WEST) MATHURA

Amount

M & L Preparing existing black top surface by brushing with wire brushers for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 grade @ 05 kg per 10 Sqm complete all as specified and directed.

M&L for bituminous semi dense asphaltic concrete 30 mm consolidate thickness with 5.5.% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade using as filter material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed. Note:- (i) Bituminous concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver finisher . (ii) Filler for bituminous concrete shall be OPC-43 grade @2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any negative variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ Rs.53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said item. (iv) Work shall be executed as per design mix approved by GE.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4% binder content using paving bitumen VG-30 by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc and the like n.exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix in replcement solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing in repair solar delineator made out of polycarbonate and allow body height 145 mm, dia 80 mm, comprising of super bright LEDs which gave 360 degree viewing, solar panel 20v, 120MA (approx 1.25 V) rechargable battery 1 Nos delinator shall also have high intensity retrorelective band of 1" width for extra visibilty. The delinator shall be mounted on steel pipe of 1010 mm height with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours) Complete as per drawing and fixed with PCC 1:2:4 in post holes incl dismantling of old board complete all as per specification and direction.

Manufacturing, supplying and fixing retro reflective sign boards of any shape and design. The board shall be made of ACP sheet 3mm thick and frame shall be made of mm thick stainless steel pipe 40 mm dia having all sides and entire surface shall be fully pounded with retro reflective sheeting of HIP (High intensity pnsmatic) grade having pressure sensitve adhesive. Borders cut out colour and letters, signs mtter and messages as indicated in white colour reflective tape (matter shall be on both sides of ACP sheet) all as specified by Engineer-in-charge having two posts of 3 mtr thick stainles steel pipe 63 mm dia verical posts, 3 mtr total height and embedded and fixed with PCC 1:2:4 in post holes complete as per drwing incl dismantling of old board complete all as per specifiction and direction. Note :- Letter writing arrows, digits, signs and logos will be finalized by GE.

S&F in repair for convex mirrors made of one piece polycarbonate lens which is damage resistant dia of mirror 800 mm outdoor use with hood complete with mounting hard ware for upto height of 1500mm above GL and 50cm below the GL with medium grade MS pipe 65mm dia including steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer including all leads and lifts etc complete as per drawing and fixed with necessary excavation and PCC 1:2:4 in post holes complete all as per specified and directed.

S&F safety bumps heavy duty specially suitable for heavy vehichle of size 250x325x50mm in yellow & black colour incl dismantling of old safety bumps complete all as per specified and directed.

Manufacturing suppying & fixing in replacement to signage / Logo made of 3 mm thick Acrylic sheet of any size approved by GE, fixed in any position with fastners complete all as specified and directed.

Manufacturing supplying & fixing in replacement to signage / Logo made of 3mm thick Stainless Steel Callar of any size approved by GE, fixed in any position with fastners complete as specified and directed.

M/s M S Sharma and Co. (BID ID -3127193)