Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC 3 225 PERUMALPATTI THANIAMANGALAM POST MADURAI 625 109 | MADURAI | MADURAI | TAMIL NADU | 625109 | L1 | Accepted-AOC L1 ADMIT | |
| 2 | L2₹42.9 L+₹3.4 L (8.60%)Rejected-AOC NO 5D AGILA NAGAR 5TH CROSS EXTENSION GANAPATHY NAGAR SOUTH EXTENSION THIRUVANAIKOVIL TRICHY 5 | TRICHY | TRICHY | TAMIL NADU | L2 | Rejected-AOC L2 |
Tender Value
₹39.6 L
EMD Value
₹39,557
Closing Date
14 Jul 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
commissioner madurai corporation
Aringar Anna Maligai
Construction of Additional Building at Melavasal UPHC in ward 76 no.76.
2023_MAWS_336148_1
Ma.Po.4/Est.No.933/22-23
Open Tender
Civil Works
Lump-sum
60 days
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹39,557
11 Sept 2023
6 Jul 2023
14 Jul 2023
6 Jul 2023
14 Jul 2023
6 Jul 2023
Amount
Earth work excavation in all kinds of soil except hsr rock requiring blasting inclusding of shoring strutting and bailing out of water whenever necessary etc., complete
Supplying and filling in foundation and basement with quary dust in layers of not more than 15cm thick well rammed and consolidated including watering complying with standard specification etc.complete.
Plain Cement Concrete 1:4:8 (one cement four sand and eight aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, lating and labour charges and all incidental charges such as water providing etc., complete as per standard specification
Plain Cement Concrete 1:2:4 (one cement Two sand and four aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, lating and labour charges and all incidental charges such as water providing etc., complete as per standard specification
Supplying and Filling Well Gravel in layers of 25cm thick including cost of gravel stacking for premeasurements watering and consolidation by power roller rolling using 12.50 cum of gravel for 10 m3 for finished work etc. Complete
Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar, RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2.
Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc.., complete (Rcc coloumn footing plinth beam and lintel sides)
Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar, RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Bottom Only) using steel plates10m2.
Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken / and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also).
Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT Ground Floor Super Structure
Supplying and Fixing of Cuddapah Slab 38 / 40mm Thick. MDU-CORP-BUILDING DATA-P-14
Plastering with CM 1:5 (one cement and five sand) 12mm thick10m2.
Plastering with CM 1:3 (one cement and Three sand) 10mm thick10m2. Ceiling
White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m
Painting two coats with Oil bound Distember over one coat of wall primer
Painting wall surface with two coat of Synthetic Enamal paint oapproved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved byMunicipal Engineer before use on work
Dadooring the colour glazed wall tiles of size 300mmx200x6mm pardon cement morter 1:2:10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joints and pointing flesh with total surface etc., complete
Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with G1/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work TWAD P.No : 177
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. B.Data P.no : 43
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work PWD SOR Pg. No. 66
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steelreinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. PWD P.no : 74
Wiring with 2x2.50 sq.mm PVC unheated SC Aluminium cable of 650 V grade in suitable PVC rigid pipes in wall or ceiling with PVC accessories with TW switch box in flush with wall covered by hylum sheet3mm thick and painting with suitable colour of 14 SWG TC wire for light point. and Fan Point TWAD-DATA-P- -SL No:
Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set
Supply and fixing of single box type18'W 4Feet LED flu Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. TWAD-DATA-P- -SL No:
Weathering Course with Concrete Broken Brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 MDU-CORP-BUILDING DATA-P-36-SL No:46
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete MDU-CORP-BUILDING DATA-P-40-SL No:47
Providing water closet 580mm size orissa type indian make with (P) Trap including ixing a pair of foot rest over a bed of brick jelly concerete in LM 1:2 using 40mm broken brick jelly 100mm thick and top plastered with CM 1:3 20mm thick etc. cost of water closet foot rest and trap each
Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc PWD P.No : 59
Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45x45cm medium weight L.S cover and frame etc.complete.., (Size 60x60)
Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete
Writing Name board and Art painting work in Name Board the rate shall be include the cost of artist, paint scaffolding and all labour charges etc.complete..,
Supply and delivery and fixing of GI Pipes and specialsas per IS Specification 110mm PVC Pipe
32mm PVC Pipe
25mm PVC Pipe
110mm PVC Couplker
110mm PVC Elbow
32mm PVC Coupler
32mm PVC Elbow
32mm PVC TEE
32mm x 25mm Reducer
25mm PVC Coupler
25mm PVC Elbow
25mm x 15mm TEE
1/2" CP Tap
32mm GI pipe
32mm GI Coupling
32mm GI Bend
32mm GI Elbow
32mm Gate Valve GM
32mm NRV Valve GM
32mm GI Hex Nipple
32mm GI Union
32mm GI Tank Nipple
Conducting Geological Survey to fix borewell point
Drilling 150mm dia borewell in all kinds of soils except hard rock by first taking pilot bore and then enlarged to required dia meter to enable inserting the PVC casing pipe by directed rotary mud and circulation method including all labour and water etc.complete. (TWAD data Pg.No: 281 Sl.no:12(a)
Supply of 150mm O.D PVC casing pipe as per Iss.(TWAD data Pg.No: 22 Sl.no:1)
Labour charges for inserting 150mm O.D PVC casing pipes assembly (with slot or without slots) in the drilled bore including jointing the pipes etc complete. (TWAD data Pg.No: 283 Sl.no:13a)
Drilling of 150mm dia vertical bore in hard rock to the required depth including charges for labour, fuel, water required for crilling etc complete. (TWAD data Pg.No: 280 Sl.no:11(a)
Supply of 125mm dia PVC Casing Pipe and Labour charges etc complete.
Developing the borewell with air compressor of 300cfm capacity (min 8 hours) including transporation labour and fuel charges for comperessor as directed by corporation yield test by 'V' notch method. (TWAD data Pg.No: 284 Sl.no:13b)
THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA-5HP BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS 9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/-10%, 50HZ +/- 5 %, 50 lpm x 175mtr
THREE PHASE PANEL BOARD- D.O.L. WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to S13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). - 5HP
Supply and delivery of PVC insulated and sheathed 4.0sqmm copper cable conforming to IS 694/1990 suitable for submersible pump set.
Labour charges for erection of submersible pump set bore well in cluding fixing and jointing submersible cable with proper clamps pressuregauge up to the exrterior wallof pumproom kisok and erection of panel board consisting of TPCIN switches starter volt meter ammeter thre indicator tamp capaciator single phase preventor ater level guard laying and jointing if cables and earthing complete the pumpset on trial for 3 days.
Supply and delivery of 2000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.
Labour charges for over head wiring from EB pole to pumproom by fixing 32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S. clamp set, U.Kondi, 7/20 GI wire, 7/20 PVC insulated copper wire reels, T.W. meter board, aerial board, earth plate GI Bolt of nuts, PVC Hose fuse wiring etc. complete
Add GST 18%
S RAMANATHAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .