Repair and Renovation of Kothi No.3 of

Amount

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base.

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.

Scraping Cement plaster

Cement Rendering 1mm thick on cement plaster work

20mm thick cement plaster 1:4.

Forming groove of uniform size from 12xl2mm and upto 25xl5mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications

Scraping White wash and colour wash etc.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish.

Applying Priming coat with cement primer in all shades on newly plastered or conc surface

Wall painting with plastic emulsion paint of approved brand to give an even shade 2 coats

Finishing walls with acralic smooth exterior paint of reqdshade with 2 or more coatsapplied @ 1.67kg/10sqm over and incl. base coat of water proofing cement paint @ 2.20kg/10sqm

P & applying Anti termite treatment using post constructional chemical treatment using chemical containg choloropyrifos systemic insecticide diluted & injecting with chemical solution

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material

Providing a vitrified floor tiles 600x600mm size premium quality, manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades,

Grouting the joints of flooring tiles having joints of 3mm width, using Epoxy grout mix of 0.70 kg oforganic coated filler of desired shade 0.10kg of hardener and 0.20 kg of resin incl filling and finishing complete.(size 600 mm x 600 mm)

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand).Bed room 1 Toilet

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone,including rubbing and polishing including labour for fixing dowel pins and cramps.

Extra cost for projected Noing of any shape and design

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement cocrete M-20 mechanically batch mixed using Batch type concrete mixer and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in superstructure.

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade, for R.C.C. works where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Stripping & stacking tiles of roof

Dismentelling brick or flagged stone flooring without conc base

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Cement concrete 1:2:4 gola 10 cm x 10 cm quardrant type

scrapping of old tiles dismentelled/removed from the terracing work in cement

Making Top khurra 0.6x0.6m for rain water pipe in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Bottom khurra on ground 1.2m x 0.6m consisting of bricks laid in CM 1:3 over 7.5 cm cement conc 1:8:16 incl 12.5 mm th cement plaster 1:30.6x0.6m for rain water pipe in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Providing and fixing 110mm dia UPVC Rain water pipes incl jointing complete

Providing and fixing 110mm dia UPVC Bend for Rain water pipes incl jointing complete

Dismentelling/Removing door windows with chowkhats by making access in walls:- Doors of area 3 sqm & below

Dismentelling/Removing door windows with chowkhats by making access in walls:- windows of area 3 sqm & below

Dismentelling/Removing door windows with chowkhats by making access in walls:- clearstory windows/ventilators

Dismentelling/Removing door windows with chowkhats by making access in walls:- almira/cup boards size 4.5'x6.25'

Dismentelling/Removing door windows with chowkhats by making access in walls:- Vehrandah frames 6'6" x 7'

Making openings in bk masonary incl dismentelling, fixing chowkhats :- for door chowkhats (size 1.22 m x 2.06 m)

Making openings in bk masonary incl dismentelling, fixing chowkhats:- for window chowkhats (size 1.52 m x 1.22 m)

Making openings in bk masonary incl dismentelling, fixing chowkhats:- For clerestory windows (1.22 m x 0.46m)

Chowkhats of commercial hard wood such as Assam champ Double rebate ( 150mmx60mm)

Chowkhats of commercial hard wood such as Cheetah champ(Assam) Single Rebate ( 100mmx60mm)

Cheetah Champ Assam wood door shutters/ window shutters 35mm th. Pannalled, glazzed or glazzed and pannalled

Wire gauge Cheetah Champ assam wood door/ window shutters 35mm thick

Cheetah champ assam cup board shutters withplywood pannalles or faces on both sides 30mm thick

Wire gauge fixed on chowkhats with assam champ wood cover moulding

Teak wood planking planed on both sides 30mm thick

Teak wood plain lining on and PVC plugs

Stainless steel pipes for window grills 22.22 mm outer dia pipes

Iron gratted doors,incl pintle hinges and arrangments

Fixed glass panes 5mm thick plate (INDIAN))

Extra cost for alluminium fittigs such as tower bolts, handles, stoppers, screws etc

Sliding bolts 300x16mm

brass 100mm mortice latch and lock with 6 levers and handles

Hydralic door closer

Curtain rods 25mm dia

stainless steel ball bearing hinges

P/Fixing 0.5mm th aluminium sheet

Double action spring hinges 100mm

Prepration of plywood surface for painting incl sand papering

Applying pink primer on wood work

Painting 2coats with synethetic enemal paint

Providing & fixing 14 gauge MS sheet garrage door

Construction of Embankment with good quality earth obtained from borrow pits inclcompaction of earth, loading, unloading , carriage to site of work ,spreading , grading to reqd slope and compacting.

Prepration of subgrade and compaction of earth

Cement concrete 1:4:8 with 40mm gauge stone aggregates in foundation

Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete

Extra cost for using darken fast shade for interlocking pavers of any shape & thickness instead of ordinary gray colours.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with mpaction including disposal of all surplus soil as directed within lead of 30 metres.

Pcc cement conc 1:8:16 in foundation

1st class brick work in CM 1:5 1n foundation

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

12.5mm thick cement plaster in CM 1:4

Finishing walls with water soluble cement paint such as snowcem

Providing and fixing CPVC pipe CPVC SDR 11 Pipe and fittings 25mm o/d

Providing and fixing CPVC pipe CPVC SDR 11 Pipe and fittings 40mm o/d

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages omplete.:- Ball Valve 25mm dia

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages omplete.:- Ball Valve 40mm dia

Providing, fixing and jointing Union Coupling in GI pipes lines:- 25mm dia

Providing, fixing and jointing Union Coupling in GI pipes lines:- 40mm dia

Cutting holes up to 23 cm square through brick work in cement wall :- Through 22.86 cm thick

Cutting holes up to 23 cm square through brick work in cement wall :- Through 45.72 cm thick

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. 75X75 mm

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 ching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C.inspection chamber cover and frame (Weightas per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming toI.S.I complete as per standard design. (C) 600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).560mm i/d RCC man hole cover with frame as per ISI (extra heavy duty)

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 160mm o/d pipe

Making soak pit 2.5 m outer Diametre 3.0 metre deep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design (with FPS bricks).

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using ixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. inside size 90x150cm and 120cm deep

Providing and fixing in position vitreous china ware white lavatory suits of approved make including brasstuds without CP fittings :- size 630mmx500mm x 830 mm

Providing and fixing in position vitreous china ware white lavatory suits of approved make including brasstuds without CP fittings :- size 630x500 mm above counter oval

Providing and fixing C P brass sink mixer with swinging spout wall mounted.

Waist pipe PVC 32mm dia

Providing and fixing divertors of appd make for bath shower system complete in all respects single lever concealed divertor for bath and shower system.

Providing and fixing in position Chinaware Floor mounted European type one pieceEWC with matching cistern with P or S trap (to the approval of the Engineer-in-charge) with seat cover complete in all respect and to the entire satisfaction of engineer in charge.floor mounted EWCsize 69x36x74 cm

Extra for Providing and Fixing PVC accessory fittings in chinaware cistern

Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut

Providing and fixing in position 5 mm thick bevelled edgeof superior glass mirror 4mm thick hard board backing of required shape complete in all respects :- size 1500mmx600mm or any other size

Providing and fixing in position 5 mm thick bevelled edgeof superior glass mirror 4mm thick hard board backing of required shape complete in all respects :- size 600mm x 450mm

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). (C.P brassbib cock with wall flange)

Providing & fixing in position best Indian make PVC flexible tube connection.PVC tube connection of size 15 mm x 300 mm with PTMT nut.

Providing & Fixing in position C.P. Brass flange under various fixtures complete in all respects (as required by the Engineer-in- Charge)

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge).

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Concealed stop cock with flange.

Providing and fixing in position best Indian make C.P brass basin mixer complete instead of piller tap.

Providing and fixing in position gratings 150mm x 150mm for gully trap.SS grating

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass towel bracket 600 mm long with lower hangers

Providing and fixing in position best Indian make over head shower 1 flow with shower arm 15 or i/d Inlet of approved make complete in all respects.

Providing and fixing in position best Indian make soap dish fixed into wall with rawl plugs and C.P brass screws and complete in all respects ..

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects including cutting and making good the walls etc. C.P brass towel ring

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass toilet paper holder

Providing and fixing in position SWR UPVC soil waste vent pipe or anti syphonage pipe 110 mm OD laid complete.

Providing and fixing in position HCI specials for soil waste vent or anti syphonage pipe to specifications . HR Bend 100 mm i/d H.C.I

cement concrete 1:2:4 with stone aggregate 20 mm size.

Providing and fixing CP brass extension piece 25mm to 50mm long of approved make complete.

Providing & fixing in position Gully traps fixed in cement conc. 1:4:8 complete with grating 150mmx150mm cover & frame clear opening 300mmx300mm and outer side 330mmx330mm and chamber incl cost of brick work in CM 1:5 cement concrete 1:2:4 in coping around cover & frame complete

Soap container

Floor Trap 110mm dia

Providing and fixing Stainless steel health faucet complete in all respect.

Providing & fixing in position on terrace (at all floor levels) HDPE tank cover for water storage tanks of approved make (to the approval of Engineer -in-charge) complete in all respect. Tripple layer tank

GI Tank nipple :- 25mm dia GI tank nipple

GI Tank nipple :- 40mm dia GI tank nipple

Plastic ball cock with rod & plastic ball 25mm dia

CP Brass acrylic shelf corner

Providing & fixing in position stainless steel rectangular sink with deluxe border Double bowl overall size1114mmx490mmand bowl size460x385x200mm of approved make with waste coupling complete. Double bowl sink

Providing & fixing in position CP brass sink mixer

Providing and fixing cp brass Urinal butten flusher 15mm

Providing and fixing vitreous chinaware large flat back urinal

Urinal spreader

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (With fan box)

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- wiring call bell point

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 3 pin 6Amp. wall socket point

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 3 pin 6Amp. power plug control wall socket point

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 3 pin 16/20Amp. power plug control point

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes( 1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined / universal Socket (shuttered), 6/10Amp. Switches,16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point with double control switches.

Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.0 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0 sq.mm (84/0.25mm), 2Core

Supply & erection of PVC Conduit Pipes(ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:- MCB Double Pole 6-32amp. (10kA, CurveC)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:- MCB Double pole Pole 50,63amp. (10kA, Curve-C)

Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Double Pole 32amp., Sensitivity 30mA

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- TP&N Double Door Distribution Board 12 way each

Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.:- 25 ltr capacity

Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable No. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-(Automatic Voltage Stablizer 2 KVA)

Erection of Ceiling fans ( Labour rate only)

Erection of Exhaust fan with louver shutter on the wall/ window grill

ERECTION, REPAIR AND REWINDING OF fANS: (34.28 A) ERECTION OFFANS: ((ii)) Erection of light fixtures on wall/ ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- ((b)) Erection of 1X28/36/40W and 2X28/36/40W Mirror optics (LED/ Fluorescent) light fixture (Labour rate only)

Earth work excavation in ordinary soil, exclusive of compensation of earth:- ((a)) Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods.

Scraping :- ((d)) Mud plaster

Dismantling wire gauge with frame work including separating frame work and putting wire gauge into rolls.

Washing concrete surface scrubbing with brushes including preparing and laying slurry.

Nicking cement concrete surface (over 28 days old including preparation and laying slurry)

disposal of Malba.

Making connection with 2.00 395.39 Each 790.78 the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. :- (a) for pipes 100 to 250 mm Diametre

Extra job for installation of all AC and including supply pipes if any

GARG BUILDERS (BID ID -588980)

VISHAL CONTRACTOR (BID ID -589012)