COMPREHENSIVE MAINTENANCE OF 26 NOS ELECTRIC LIFTS MAKE OTIS THYSSENKRUPP OF G 06,G 14 STOREY BUILDING AND MANNING AND OPERATION OF ELECTRIC LIFTS ANY MAKE AND CAPACITY AT BLDG NO R3, G BLOCK, H BLOCK

Amount

Note:- (i) The Contractor has to carry out the AMC of the Lifts through OEM (OTIS) only for which he will enter an agreement with OEM (ii) The AMC should cover any/all parts of Lifts if its fucntions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms.

8 Ps Lift (544 Kg) (G+14 Storey) in Building R-27, R-30, R-31, R-34 & R-35 (OTIS) (Total 05 Nos Lifts)

13 Ps Lift (884Kg) (G+14 Storey) in Buildings R-14, R-17 & R-34 (OTIS) Total 03 Nos of Lifts

8 Ps Lift ( 544 Kgs)(G+6 Storey) in building F1 & G Block (OTIS) Total 02 Nos of Lift

13 Ps Lift (884Kg) (G+6 Storey) in Buildings F1 & G Block (OTIS) Total 02 Nos of Lifts

Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Notes : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department. (iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell i.e. R-12 building . New Navy Nagar for receiving the complaints at round the clock daily including sunday and holiday. (iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendance register kept with lift cell.

8 Ps Lift (544 Kg) (G+14 Storey) in Building R-18(Thyssenkrupp) (Total 01 No Lifts)

13 Ps Lift (884Kg) (G+14 Storey) in Buildings R-15, R-26 ,R-30, R-33,R-35 (Thyssenkrupp) Total (05 Nos of Lifts )

29 Ps Lift ( 2000 Kgs) ( G + 14 Storey) in Buildings R-28, R-29, R-30, R-31, R-32, R-33,R-34, R-35 (Total 08 Nos Lift )

Replacement of unserviceable cabin fan from car cabin, supply and fixing, new cabin fan, non-oscillating type, axial flow, single speed 300mm sweep, 240 volts ISI marked with grill complete all as directed by Engineer-in-Charge.

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge.in 8/13 /Goods Lift, G+14 Storey buildings.

Disconnecting and taking out old/unserviceable Governer rope of size 8 mm dia(8/19 Construction) ungalvanised including necessery connection with pully in machine room and shaft pit complete with clamps, nuts bolts, and washers etc, for high rise building for 8/13/Goods lifts

Dismantling and taking out unserviceable safety edge of any type & supply and fixing new full beam infrared sensor upto full length of car doors (2.00 mtr) as specified and directed by the Engineer-in-Charge.

Replacement of automatic door drive unit with VVVF of 1 HP capaicity all as specified and directed by Engineer-in-Charge.

Taking down and supply and fix hooter with emergency call announciator working on 12 Volts with audibility 90DB @ 100M distance with complete accessories and alongwith box including connecting cables

Disconnecting and taking out unserviceable UPS Sua3000l3000Va and supply and fix new UPS Sua3000l3000Va alongwith necessesary wiring with machine and controller for smooth functioning of ARD system of 08/13 ps lift.

Disconnecting and taking out unserviceable UPS Sua6000l6000Va and supply and fix new UPS Sua6000l6000Va alongwith necessesary wiring with machine and controller for smooth functioning of ARD system of 29 ps lift.

Taking down old unserviceable CEGARD MINI w/Y Cable harness along with control box and supply and fix CEGARD MINI w/Y Cable harness along with control box in full height( 2.00 Mtr) as specified and directed by Engineer-in-Charge.

Taking down old UNSV hall button and supply and fix new full collective hall button fixtures with call registration light combined with Digital floor position indicator and Up/Down directional arrows at all floors with SS face plate all as specified and directed by Engineer-in-Charge

Taking down old unserviceable Chequred plate and supply and fix Aluminimum Chequred plate of 5mm thick duly fixed with nuts, bolts, washers,screws and covers with aluminimum angles section of size ( 40x40x4 mm thick) on corner of cabin in and including plateform base of 10mm thick plywood of 08/13 Ps lifts

Dismatling and taking out unserviceable old control panel and control wiring and supply and fix new CAN BAS Integrated Drive based collective control panel in hinged MS powder coated cabinet with control wiring comprising with multiple microcontrolled programmed chip based controlled by pulse modulation, complete with all safties such as thermal overload protection, over current protection, auto phase reverse link to each other in net work and compitable to 18 KW/24HP capacity VVVF drive including proper connection with proper lugs, terminal connectors screws and motor connection with galvanised sheet trunking 24 SWG including wiring of main motor with suitable size of stranded copper cable etc complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out old/unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanished sheet metal trucking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch all as specified and directed by the Engineer-in-Charge. for G+14 Storey building.

Disconnecting and taking out defective unserviceable main drive (any type) from existing control panel and supply and fixing CAN BAS Integrtaed drive suitable for 13 Ps lift G+14 storey building complete with all electric connection.

Disconnecting and taking out defective dynamic breaking resistence from controller and supply and fixing new aluminium covered wire wound dynamic breaking resistor to absorb the reverse energy dissipation of motor during regeneration in control operation suitable for 11.0KW/15HP motor.

Taking down old UNSV Announcement system and supply and install, testing and commissioning of MP3 voice announcement system in the controller and high quality speaker on car top, with necessery provision of shaft wires and travelling cable complete as specified. The audio indicator shall anounce floor position, ARD made operation, overload announcement etc and continious mild music in hindi and can be programmable for more music. The announcement system shall be in hindi and english.

Manual operation of electrically operated lifts (6Ps,8 Ps & 13Ps) per Bldg, of existing make and capacity daily 08 hrs in one shifts from 0600hrs to 1400hrs, including cleaing, taking care of entire lift installation from any pilferage, theft or damage etc complete all as directed by Engineer-in-Charge for R-3, G Block, H Block, Asha- 3, F- 3 and F-4 building (Total 06 Nos Building) for lift attendent (semi skilled) (11 Months) (1x6x11= 66.)

Note for item No 19:- (i) Passes will be processed alongwith (after verification of antecedence of deployed employees and verified experience certificate only. Pass shall not be granted without submission of proof of well qualified lift operators & experience certificate. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of pass) (ii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iii) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (iv) Lift attendent (semi skilled) shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected.(v) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (v) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell.

(vi) Contractor shall submit the labour licence as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (vii) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (viii) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (ix) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. x) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost as given Page No 15 of Sch of Notes, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid. (xi). The deposited amount shall be the difference between estimated cost as given Page No 15 of Sch of Notes and amount quoted by lowest bidder for respective item. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. (xii) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working.

Monarch Enterprises (BID ID -3111461)

Shree Elevator Engineering Co. (BID ID -3111546)

shakti engineering and electrical works (BID ID -3108464)

Escon Elevators Pvt Ltd (BID ID -3107506)

Bidder Name

Veer High Tech Solution