PERIODICAL SERVICES TO OTM ACCN UNDER AGE B AND R II OF GE Central BANGALORE

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

M&L for rendering 15 mm thick in CM 1:4 on brick work/stone work or concrete surface work, finished the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in CM 1:6 on brick work/stone work or concrete surface work, finished the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on ceiling surface, finished the surface even and smooth without using extra cement complete including prepration of plastered surface and applying three coats of white wash on Ceiling complete all as specified (Note : Quoted rate is deemed to be inclusive of rendering & three coats of white wash complete)..

Providing and applying 1-2 mm thick Birla white cement based wall care putty on plastered surface of ceiling / walls prepared the surface even & smooth to the satisfaction of Engineer-in-charge .

M&L preparing new plastered wall surfaces by rubbing, scrapping by hand held sander / long handle sander and washing and applying two coats Oil bound distemper by mechanical means / auto roller applied over a coat of alkali resistant primer over a coat of 1-2 mm thick white cement based wall care putty complete all as directed.

M&L Preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed.

All as per item No 7 here-in-above but two coats -do-

All as per item No 7 here-in-above but two coats on ceiling -do-

M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc by hand held sander / long handle sander(Plastered or unplastered surfaces) and applying one coat of white (lime) wash complete all as directed.

M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and applying one coat of oil bound distemper by mechanical means / auto roller including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed.

All as per item No 11 here-in-above but two coats -do-

M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and washing and applying one coat of cement base paint by mechanical means / auto roller complete all as directed.

All as per item No 13 here-in-above but two coats -do-

M&L complete removal of existing any type of treatment on surface of walls of any description, rubbing, scrapping by hand held sander / long handle sander and Jet pressure washing and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces applied by mechanical means i.e Airless spray including filing undulations with 1 - 2 mm thick white cement based putty mixed with multi purpose mixer complete all as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete ll as directed.

M&L preparation of old painted wooden surfaces exc 10 cm width or girth all as specified in SSR Part-I and applying one coat of Ist quality synthetic enamel paint, complete all as directed.

All same as per item No 17 here-in-above but on steel surface -do- Note for Periodical items : Note: 1. For measurement purposes in respect of those building for which audited periodical services measurement book are available, quantities shall be taken from PSMBs direct and entered in measurement book (IAFW-2261) and in respect of those buiidings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in measurement book in the usual manner. 2. Any fittings or fixtures disturbed or damaged during the progress of work, will either be rectified or replaced by the contractor himself without any delay and at no extra cost to the Govt. 3. Prior approval of colour shade/ tint is mandatory from GE (Central) Bangalore before commencement of work. 4. The quoted rate aganist various items of above Schedule is deemed to be inclusive of prepration of surface with Hand held sander / long handle sander, cleaning the wall/ ceiling surface with jet pressure washer, mixing putty with multipurpose mixer, appying Anti fungal paint with Airless spray appliance, and applying distemper & Plastic emulsion with Mechinal means / Auto roller as ordered. Engineer-in-Charge should ensure that Contractor's are obtained prior approval of cleaning & application items before commencement of perodical work.

Omkar Constructions (BID ID -3284444)

AishwaryaConstructions (BID ID -3284654)

VP DEVELOPERS AND CONTRACTOR (BID ID -3288961)