Construction of Plastic Waste Management Unit at Natnussa

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge,All kinds of soil :

P/L of stone soling dully hand packed hand rammed incl. filling the interstices with stone chippings, all carriages complete

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size): Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level

1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size): Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level(Mild steel and medium tensile steel bars)

Centering and shuttering including strutting, propping etc. and removal of form for, Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for, Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Supply and filling of RBM under floor incl. compaction by raming, watering etc all carriages complete

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,Welded

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 63 mm thick with zinc coating not less than 275 gram/m2

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.12.4.1 0.80 mm thick with zinc coating not less than 275 gram/m2 , 0.63 mm thick with zinc coating not less than 275 gram/m2

Carriage of material from Source upto site of Work by Mechanical Transport, Sand/Stone aggregate at an avg. lead of 30Km

P/F of information sign board made of iron with 50mmx50mmx 6mm vertical posts with iron sheet of thickness 3 mm of size 600mm x 450mm enclosed along perimeter with angle iron of 30mmx30mmx 4mm ,painted in white with nomenclature of work with black paint incl all items and carraige and fixing of same in M-15 grade of concrete in 220mm x 220mm x 220mm .the overall height of board should not be less than 2000 mm and other required fixtures