REPAIRS TO CERTAIN FURNITURE INCLUDING POLISHING, PAINTING, RECANNING AND ALLIED WORKS AT CGDHQ-10, 3U DET, INS BAAZ, ARMY LAND AT CAMPBELL BAY AND INS KARDIP, KAMORTA UNDER GE(I) CAMPBELL BAY

Amount

PART - I : REPAIRS TO WOODEN FURNITURE AT CGDHQ-10 & 3U DET, CAMPBELL BAY Repair/Replacement of old/unservicable material and labour for dismantling of unserviceable components or borer eaten parts of furniture item carefully without disturbing the adjoining parts and S & F with new components first class teak wood or as per the required sizes mentioned in the drawings. All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty whereever required on completion of repair. After repair, fill uneven surfaces with Bee-wax at the site as directed by the Engr-in-Charge

Chair dining wooden (FD-279/228/FD/E6MAP/10)

Rear leg

Front leg

Seat side rail

Rear rail

Side stiffener

Centre stiffener

Supply and fixing for PVC seat bottom for chair dining (FD/E6/MAP/10)

Back rest 45x15mm curved out of size 45 x 35 x405 mm as directed by Eng-in-Charge

Chair easy ( FD-229)

Rear leg

Front leg

Seat side rail

Rear rail

Back bottom frame

Front/back frame stiffener

Arms rest

Table dining 06/08 person (FD-273M/239/273/376)

Leg for table dining

Middle stiffener

Top long rail

Top short rail

Table top with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site as directed by Eng-in-Charge

Table centre (FD-274/235)

Repair/ Replacement of Leg for table centre

Bottom stiffener

Top long rail

Top short rail

Table top with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site as directed by Eng-in-Charge

Chair writing cushion (FD- 202/280/20)

Repair/ Replacement for Rear leg

Front leg

Rear rail

Front frame stiffener

Back frame stiffener

Arms rest

Replacement of old/unservicable foam cushion with tapestry cloth and S&F new foam cushion of existing size duly covered and stitching withg tapestry cloth complete all as specified and as directed by Engr-in-Charge, Make : Sleep well/ Kurlon

Back stiffener

Chair writing wooden (FD-280

Repair/ Replacement for Rear leg

Front leg

Rear rail

Arms rest

Back frame stiffener

Front frame stiffener

Desk Stand Lecture FD-125

Top for desk stand lecture

Notice Board FD-99(M)/ 378/366

Out side frame

Sliding glass

Green/red colour blaze

Computer table (all Model) TP

Table top with pre-laminated particale board and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table

Sofa set 4/5 seater (FD-234/281) Replacement of old/unservicable foam cushion with tapestry cloth and S & F new foam cushion 40 density of Size 21''x 22'' x 4'' duly covered and stitching with tapestry cloth complete all as specified and as directed. Make : Sleep well/ Kurlon

Table writing (FD-249/275)

Table top with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site complete all as specified and as directed by Engr-in-Charge.

Top short rails

Front long rails

Top long rails

Bottom stiffeners short rail

Drawers of size 355mm long from 6mm thick commercial ply to bottom of drawer, 18mm thick prelaminated particle board Cabinet door & drawer along with locking arrangemnt and handles rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy (FD-232/278/302/382)

Repair/ Replacement of table top of size 450 x 600mm with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and fixed with 18 x 12mm wooden beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site as directed by Eng-in-Charge

Legs of size 450mm x 60mm x 30mm

Stiffeners

Long rail

Short rail

Bed hard ply top with MNF set FD-246/247/(FD-E6/MAP/08 )

Repair /Repalcement for 12 mm thick BWR plywood grade A of size 900 x 1800 mm, ISI Marked, confirmed to IS-303 in single piece complete all as specified and as directed.

Long rail

Short rails

Hard board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete all as specified and as directed.

Stiffeners

Vertical and Horizontal including legs

Book case wooden (FD-237)

Repair /Repalcement for shutter and providing new shutter made out of 18mm thick pre laminated particle board exterior grade. Board and providing teak wood beading all around complete all as specified and as directed.

Stainless steel Hinges

Back of book case and providing new Back with 6mm thick plywood

Hat stand with mirror small & large FD-233 /206

Mirror 5 mm thick

Back of hat stand

Peg hooks

Table cook house FD-49(M)

Repair/Replacement of table top

Short rails

Long rails

Bottom stiffners rest all as shown on drg and as directed by Engr-in-Charge.

Peg table (FD-236/277)

Table top with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site as directed by Eng-in-Charge

Top/ Long rail

Bottom rail

Short rail

Stool dressing FD-252/282/384

Legs of stool dressing

Side rails

Rear rails

Table 3'x2' with drawer FD-283/231

12mm thick x 100 side teakwood plank for drawer

6mm ply top for drawer base

Botttom rail

Top horizontal rail

Top vertical rail

Table top with pre-laminated particale board exterior grade (OST) Size 18 mm thick by fixing with screw on existing frame and tightening all loose components properly and providing 4mm thick teak wood beading and apply teak wood coat of french polish to beading of the table for obtaining glossy finish at the site as directed by Eng-in-Charge

Drawer for table

Table dressing gents with mirror FD-230/ 379

Repair/Replacement for drawer for Table dressing gents made out of prelaminated particle board exterior grade 12mm thick one side teak facing and balancing white on the other side and 12 x 12mm wooden beading around complete all as specified and as directed.

New mirror 5mm thick with full frame

New top of made out of 18 mm thick pre laminated particle borad exterior grade of approved all as specified on drawing or as directed by Engr-in-Charge.

Table dressing ladies with mirror FD-251

Table top

Shutters for 5mm thick Glass

S & F in repairs aluminium channel

New back support

New mirror 5mm thick

Knob 25mm chromium plated.

Side shall be made of 12mm thick prelaminated particle board exterior grade with 6mm teak wood edging.

Repair to drawers of table dressing ladies with 12mm thick prelaminated particle board wherever required

Table card FD-353

Repair/Replacement for Leg

Bottom rail

Top horizontal rail

Top vertical rail

Table top with pre-laminated particle board 18 mm thick

PART - II : POLISING & PRESERVATION Material and labour for preparation for scrapping of following wooden furniture by all means with abrasive paper and filling the gap or depressed surfaces with Bee wax and making the surface smooth, and there after apply Teak wood coat of french polish to a glossy finish and as directed by Engineer-in-Charge. Work will executed where furniture exist at different location under the jurisdicion of GE (I) Campbell Bay

Chair dining wooden FD--279/228/E6MAP/10

Chair easy FD-229

Table dining 06/08 person FD-273M/239/273/376

Desk wooden FD-107/124

Table centre FD-274/235

Chair writing cushion/wooden FD-280/FD/E6/MAP/12

Table card with four chair FD-353

Chair writing FD-280

Sofa set 4/5 seater FD-234/281

Table writing FD-249/275

Table bed side wooden FD-276/ 28 /210

Teapoy FD-278

Bed hard ply top with MNF set FD-246/247/213

Book case wooden FD-237

Desk wooden FD-107/124

Hat stand with mirror small & large FD-233

Notice board 1525x400mm (all patterns) FD-99

Peg table FD-236/ 277

Peg set of six FD-80

Chair for card table FD-353

Meat Safe & milk with marble top FD-173(M)/ 60 /TP

Rack Wooden Magazine TP

Riffle rack for 10 riffle FD-126

Table 3'x2' with drawer FD-283

Table dressing gents with mirror FD-230/279

Table dressing ladies with mirror FD-251

Table office officer executive TP

Table computer C-6 TP

Table workshop bench type TP

Bed Newar with MNF set FD-213/245 TP

PART - III : CANNING & PRESERVATION After polish work, Material and labour for removing wron out unservicable cane the following items S & F cane with approved plastic cane of 2mm wide, 0.5 thickness half -round as per godrej pattern and providing 4mm wide half-round border all around as show in the drawing and as directed by Engr-in-Charge.

Chair dining wooden FD-279

Chair easy FD-229

Stool dressing FD-252/282

Chair writing FD-280

Chair Verandah FD-256

Chair CBA with arms & w/o arms FD-75(M)

PART - IV : REPAIRS TO STEEL FURNITURE Material and labour for removing unserviceable/broken portion from all type steel furniture and S&F same to the items as per standard drawing as directed by Engineer-in-Charge.

Almirah steel large with shelf FD-1032/243/67

Repair/Replacement for legs of Almirah Large steel and providing new leg by welding made out of 1mm thick MS sheet duly welded including preparation of surface into required shape

Locking device including replacement of brass 6 lever locks of Make-Godrej iron body with duplicate keys chromium plated

Stainless steel handle

SS Hinges

Repair MS Clamp for proper fixing & readjustment of shelves

Welding of broken joints of Almirah steel large with shelves continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coats of red oxide primer to match with the existing shade as show in the drawing and as directed by Engineer-in-Charge

Almirah steel medium with shelf FD-1033

Repair/ Replacement for legs of Almirah medium/ small steel and providing new by welding made out of 1mm thick MS Sheet (18 gauge) duly welded including preparation of surface into required shape complete all as specified and as directed.

Locking device including replacement of brass 6 lever locks of Make-Godrej iron body with duplicate keys chromium plated

SS hinges

MS clamp for proper fixing & readjustment of shelves

Stainless steel handle

Welding of broken joints of Almirah Medium/Small steel continuously 50mm to 75mm long for smooth finish through gas welding including preparation of surface and applying two coats of red oxide primer to match with the existing shade etc complete all as specified and as directed by Engr-in-Charge

Charpoy GI Pipe with ply top FD-220/(FD-E6/MAP/08 )

Repair/Replacement for 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail

Short rail from GI charpoy

Leg for GI charpoy

MS check nuts

Repair/Replacement for GI Elbow 32 mm dia three way medium grade

Supply and fix 12mm thick BWR plywood size 1980mm of approved make for standrad size 7'x3' by removing existing ply top from Charpoy GI pipe with edges rounded at four corner including fixing with new Ms Nut, Bolt 65x3 mm & washer and the exting square pipe frames beneath the ply top complete all as specified and as directed by Engr-in-Charge.

Trolley for TV FD/E6/MAP/04

Repair/Replacement for top trolley for TV

Repair/Replacement of twin wheel castors complete all as specified and as directed by Engr-in-Charge

Chair revolving high back/low back/executive/computer with arm/without arm FD/E6/MAP/01/TP

Repair/Replacement for free Gas lift for all type of chairs revolving

Padestal assembly injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor for all type of chairs revolving

Repairs of twin wheel castors for all type of chairs revolving

Repairs of PU seat & back duly upholstered with best quality Acrylic /polyester fabric complete for all type of chairs revolving

Repairs of handles of chair revolving made of black integral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest as shown on drg and as directed by Engr-in-Charge.

Chair CBA with arms & w/o arms FD-75(M)

Repair/Replacement for rusted leg or seat back rest frame of chair with hack-saw blade and MS Conduit pipe 25mm dia, G (1.6mm thick) of requried lenth to fixed, duly welded and painted with one coat of red oxide primer

Remove worn back rest frame and supply and fix of back rest made out of first class teakwood frame

Remove worn seat frame and supply and fix of seat frame made out of first class teakwood frame, arms rest made out of first class teak wood

Arms rest made out of first class teak wood

Preparation of surface & applying two coats of red oxide primer rest all as shown on drg and as directed by Engr-in-Charge.

Locker bed side Steel CE/SK/619

Repair/Replacement for leg made out of 18 guage MS Sheet complete including preparation of surface

MS butt Hinges 75mm long

Stainless steel handle 100mm long

Chromium plated Hasp & Staple of size 75mmx40mmx3mm

Unserviceable drawers of lockers steel CE/SK/619 and supply and fixing of new drawers made of 20 gauge MS sheet

Unserviceable doors of lockers steel CE/SK/619 and supply and fixing of new doors made of 20 gauge MS sheet

Welding of broken joints of locker steel including preparation of surface & applying two coats of red oxide primer complete rest all as shown on drg and as directed by Engr-in-Charge.

Table bed side FD/E6/MAP/15R

Repair/Replacement for top or bottom of size 460 x 440mm,18 mm thick pre laminated particle borad with teak facing one side and balancing white on the other side of exterior grade and 18 x 6mm teak wood beading on front side

New back of size 460 x 440mm 6mm plywood commercial shall be fixed with headles nail

New shelf of size 100mm and 400mm x 12 mm thick pre laminated particle borad with teak facing one side and balancing white on the other side of exterior grade and 12 x 6mm teak wood beading on front side

18 mm MS square frame pipe black with powder coated 18 gauge of size fornt leg size of 500mm and back leg size of 600mm including preparation of surface & applying two coats of red oxide primer complete rest all as shown on drg and as directed by Engr-in-Charge.

Table 90X90 cm FD-1009

Replace 25 sqmm MS Pipe 16 gauge thick as per standard drgs

Table top

Welding of broken joint and preparation of surface & applying two coats of red oxide primer complete rest all as shown on drg and as directed by Engr-in-Charge.

Table centre glass top TP

Repair/Replacement for glass of table centre rest all as shown on drg and as directed by Engr-in-Charge.

Table office clerk steel FD-1004

Table top size 1680 x 870 mm for Table office officer steel of PLB (OST) Exterior grade 18mm thick and provide 4mm thick teakwood beading alround the top including polishing.

Repair /replace of rusted/ warth out part of Table with 25mm square MS Pipe 16 gauge thick, duly welded when each requirment with red oxide and applying two coats of OG paint

Replacement of Locks 4 lever with flat type SS key in duplicate of Make : Godrej/Bharat

Drawer of tables office clerk steel as per drg duly painted with red oxide and 2 coat of OG paint

S & F hard rubber shoes to bottom of legs in shape square 25mm

Table office officer steel FD-84M /1003

Table top Size 1200 x 610 mm for Table clerk steel / typist steel 18mm thick PLB (OST) Exterior grade and provide 4mm thick teakwood beading alround the top including polishing.

Repair /replace of rusted/ warth out part of Table with 25mm square MS Pipe 16 gauge thick,duly welded when each requrment with red oxide and applying two coats of OG paint

Replacement of Locks 4 lever with flat type SS key in duplicate of Make : Godrej/Bharat

Drawer of tables office clerk steel as per drg duly painted with red oxide and applying two coats of OG paint

S & F hard rubber shoes to bottom of legs in shape of square 25 mm

Chair Verandah Officer FD/E6/MAP-II/06

Remove the broken seat and Supply and fix of approved make PVC seat cover

Remove the broken back and Supply and fix of approved make PVC back cover

PVC hard shoe cap, duly removing worn-out one

Smooth the lateral surface of chair with machine paper and paint chair with white enamel paint

PART - V : PAINTING TO STEEL FURNITURE M & L for preparation of old steel surfaces by scraping with emery paper, cleaning,redusting,making the surfaces smooth and apply putty wherever required and two coat of synthetic enemal paint of shade of approved make & quality inside and out side of steel furniture all as specified by Engineer-in-Charge.

Almirah steel large with shelf FD-1033/67/351/1031

Almirah steel medium with shelf FD-1032/243

Table 900 x 900cm FD-1009

Chair CBA with arms & w/o arms FD-75(M)

Locker bed side steel CE/SK/619

Charpoy IP Hard top FD/MAP-II/01

Chair CBA with arms & w/o arms FD-75(M)

Rack adjustable 6 tier FD-106/1038

Rack shoe steel FD/E6/MAP/02R

Table bed side FD/E6/MAP/15R

Chair Verandah officer FD/E6/MAP-II/06

Table office officer steel FD-84M

Book self steel with glass FD-69

Rack pigeon hole 6 tier steel FD-106/1037

Side rack 3/4 tray steel FD-97M

Stool steel 2' height FD-81M

Table Office clerk FD-1004

Stool dressing FD-252/282/384

M/s Susanta Enterprises (BID ID -3275670)