MAINT AND REPAIR OF STREET LIGHTS SECURITY LIGHTS AND SOLAR LIGHTS AND ITS CONNECTED ITEMS INCLUDING REPAIR TO LT DISTRIBUTION NETWORK AT MH AND RANGE HILLS AREA UNDER GE MH AND RH KHADKI

Amount

Taking down old unserviceable street light fitting of capacity 1x45 watt/ 60 watt/ 90 Watt from its location complete .

Taking down old unserviceable Flood light fitting of capacity 100/120 watt from its location complete .

Taking down old unserviceable rusted damaged street light pole 9 mtr/ 11 mtrs long complete from site .

Taking down old unserviceable LT UG cable of size up to 50 sq mm from trenches / poles / ducts etc

Supply, fixing and testing LED Street light fitting of 60 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes,made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -65 / 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 300 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.95 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second fitting should be provided with 10 KV surge protection.Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 60 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection.Cover should not degrade due to heating and ageing.The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including provision of connection for street light from pole box with 2.5 Sqmm PVC insulated stranded copper conductor FRLSH cable, 1100 Volts grade ISI marked complete all as specified and directed by Engineer-in- charge.

All as per item No 5.00 above but of 90 Watt

All as per item No 5.00 above but of 45 Watt

S&F in repairs Bracket for fixing of street light fittings bend to shape, made out of 40 mm dia GI pipe medium grade upto 1.5 mtr long fixed with two sets of MS clamps made out of flat iron of size 50x6 mm fabricated to shape and fixed with nuts bolts and washers & two coats of aluminium paints over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

Supply and fix LED Flood light fitting of capacity 100 watt complete with inbuilt dimmable led driver inbuilt RF controller for individual luminaire controlling and monitoring, fitting made out from cast aluminium housing, POT optics reflector, a highly transparent and UV stablized acrylic cover hinged to the canopy, The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -65 / 66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable upto length of 7 mtr for making connection, complete all as specified and directed by Engr-in-charge.

Supply and fix LED Flood light fitting of capacity 120 watt complete with inbuilt dimmable led driver inbuilt RF controller for individual luminaire controlling and monitoring, fitting made out from cast aluminium housing, POT optics reflector, a highly transparent and UV stablized acrylic cover hinged to the canopy, The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -65 / 66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable upto length of 7 mtr for making connection, complete all as specified and directed by Engr-in-charge.

Supply and errect in verical position Steel tubular swaged poles, type 410 SP- 31 (09 mtr long) with 300mm x 300mmx6mm mild steel plate continuosly welded to pole, final taper plug, bolts,nuts and screws and making holes as per requirement all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying one coat fo red oxide primer, making 05 Nos strip each 30 cm high with super enamel paint ( Black and yellow) from ground level / coping upto 1.5 m, painting with two coats of aluminium paint for the remaning height complete all as specified and directed. Note :- PCC in foundation, copping, excavation and earth work shall be measured and paid separately under relevent items of this BOQ

Supply and errect in verical position Steel tubular swaged poles, type 410 SP- 55 (11 mtr long) with 300mm x 300mmx6mm mild steel plate continuosly welded to pole, final taper plug, bolts,nuts and screws and making holes as per requirement all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying one coat fo red oxide primer, making 05 Nos strip each 30 cm high with super enamel paint ( Black and yellow) from ground level / coping upto 1.5 m, painting with two coats of aluminium paint for the remaning height complete all as specified and directed. Note :- PCC in foundation, copping, excavation and earth work shall be measured and paid separately under relevent items of this BOQ

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by Enginner in -Charge for following sizes.

50 sq mm 3.5 core .

35 sq mm 3.5 core

25 sq mm 3.5 core

16 sq mm 4 core.

10 sq mm 2 core

6 sq mm 2 core

S & F three core PVC insulated and FRLSH PVC round sheathed, copper conductor 1100 volts grade cable of size 1.5 sqmm (multi stranded) complete all specified and directed by Engr-in-charge.

Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note : Rate for achieving required depth by compressor machine / breaker if required is deemed to be included in item unit rate.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note : Rate of item is deemed to include cost of excavation in hard rock, by compressor machine to achieve required depth.

M & L repair and replacement of LED based bollard light, with aluminium housing with acrylic diffuser of cap 15 W with IP 65/66 protection, bollard length should be 800mm complete with all accessories all as specified and directed. Make :- Crompton cat No LBLA1-10-CDL or equivalent in Philips/Halonex/ crompton. Note :- The unit rate quoted shall be deemed to include excavation and foundation work, PCC of bollard fittings as recommended by OEM and Engr-in-charge.

M & L for repair and replacement of LED post top gate light 40W aluminium housing, with IP 65/66 protection, clear acrylic diffuser, cast aluminium pole -cap complete with accessoires with suitable size 60 mm outer dia GI pipe and plastering work wherever reqd all as specified and directed.

S&F Junction box of size not less then 325x220x150mm, made of high quality thermo plastic polystyrene, weather proof, dust, jet water proof, chemical, acid corrosion, impact, insulated & shock proof IP 66 / 67 for outdoor Installation with internallly embedded gasket (PUR) including the box fitted with connector 8 way 40 Amps 01 No including Emlex stud type TB 4 Nos incoming / outcoming cable at controlled with MCB SP 6 Amps 01 No & enclosed along pole including fixing with steel tubular poles with two Nos FI clamps 25mmx3mm with nuts, bolts and washers complete and making connection with 1.5 sqmm copper conductor unsheathed FRLS PVC insulated 3 core from junction box to security lights fittings duly laid inside the streel tubular pole and bracket. complete all as specified and directed by Engineer-in-Charge. Note : 40 mm bore GI pipe light grade, 3 core 1.5 sqmm cable and GI brackets will be measured separately . Make :- Sintex Cat Part No. GSJB-3726 or equivalent in Indokop / Hensel Note :- Cost of flat iron clamp is deemed to include in unit rate quoted.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in hard/dense soil complete all as specified and directed.

Removing excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

M & L for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. Note - Punned thickness shall only be measured & paid.

M& L for road cuttung / foot path and making good with PCC M-15 grade (using 20 mm graded stone aggregate) of 150 mm

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed.

Supply and laying GI tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed

Supply and laying GI tubes light grade, galvanized, 80 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed

M&L for plain cement concrete M-10 grade (nominal mix) using 40mm graded stone aggregate for making foundation of Pole/stay assembly

M&L for plain cement concrete M-10 grade (nominal mix) using 20mm graded stone aggregate for making foundation of Pole/stay assembly

M& L for detection of street light LT UG cable fault with the help of cable fault detecting machine with experinced engineer and helper including necessary earth work complete & jointing the fautly cable with new joint , testing etc complete all as directed . Note :- Cable joint kit will be measured and paid separately under relevent item of schedule .

Supply and fix in repair brass terminal 4 way, 63/100 Amps capacity with bakelite insulator fixed in street light junction box complete all as directed .

M& L for repairing of street light fitting / luminaries of any capacity / type with replacement of burnt control wiring, LED drivers 45/60/90 watt etc complete all as directed . Note :- (i) Cost of driver shall be measured and paid separately under relevant item of this BOQ as supply only . (ii) Quoted rates is inclusive of T&P required for completing the job from any height. (iii) Any loss or damage done to the govt property during currency of work shall be make good by the contractor at his own cost. (iv) Contractor shall visit the site befour quoting the tender. any quories regarding scope of work in the tender will not be entertained after the tender is opened.

Supply only LED Drivers of street light fitting suitable for 45/60 watt capacity street light fitting complete all as directed .

Supply only LED Drivers of street light fitting suitable for 90 /100/120 watt capacity street light fitting complete all as directed .

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 11 mtr long steel tubular street light poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 9/11 mtr long steel tubular street light swan neck poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

M & L for preparing old painted steel surfaces and applying two coats of aluminium paint to 9 mtr long steel tubular street light poles complete with connected fittings such as brackets and writing the pole number with black enamelled paint of 25mm high letters on 10 cm dia circle in white paint complete all as directed.

Supply and fix in repair Astro time switch with 150 hrs battery back up working on 240 volts, 50 Hz AC supply. Make : Cat No AUTS02AST00 of L&T or equivalent make of Simens, Havells .

Supply and fix in repair 4 pole power contactor of capacity 63 Amps, 415 volts. Make : Cat No CS97014 of L&T or equivalent make of Simens, Havells.

Supply and fix in repair MCB 4 pole of capacity 40 Amps "C" curve, 415 volts including necessary disconnection of incoming and outgoing cable

Supply and fix in repair MCB SP of capacity 6-32 Amps "C" curve , 240 volts including necessary disconnection of incoming and outgoing cable

Supply only straight through joint kit , heat shrinkable type suitable for LT UG electric cable 1100 volts grade of size up to 16 sq mm 2 core cable complete all as directed

Supply only straight through joint kit , heat shrinkable type suitable for LT UG electric cable 1100 volts grade of size from 25 up to 50 sq mm3.5/4 core cable complete all as directed

M & L for trimming of branches of trees with in 1.5 mtr on either side of the electric lines/poles with suitable T & P and disposing the waste as directed and as specified. Note : Measurement for triming of tree branches shall be measured once only for entire period of completion.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Supply and fix in repair solar LED street light 30 watt luminaire integarted made of corrsion aluminium as heatsink and MS powder coated housing IP-65 with PV roatation & tilting features, inbuilt constant current driver, autonmatic dusk to down charge control with PIR motion sensor ,6500k temp, with integrated mounting bracket with 12.8v 30 AH litium ferro phosphate (Li-FePo4) rechargeable BIS certified cells. Make : Halonix cat ref HLSSLPVR0901081120-30W-WOP-CWL or equivalent make Crompton/ Havells. Note: Pole for mounting solar street light is included in the quoted rates.

M & L for checking the solar light , charging of batteries, cleaning the surface of the solar panel, terminals etc and maintaining the serviceability throughout the period of contract all as specified and as directed

Supply and replace DC Charging with control unit for solar street light panel all as specified and as directed.

Supply and replace batteries of solar street light of cap 54/60 AH , 12/12.8 volts high effiency for solar street light 20/30 Watts all as specified and as directed.

Supply and fix rigid PVC line separator suitable for 2 wire made out from high grade PVC material, having distance between phase to phase 300 mm suitable for 1100 volts grade.

M&L for painting of solar street light poles with two coats of aluminium paint including preparation of surfaces etc all as directed.

Adinath Technical Services

ONKAR ELECTRIC AND GENERAL STORE

M/S kirpan Enterprises

Rama Electricals

K D Electricals