Repair work on Municipal Council Quarter No. 1.

based on Ruidp 2023

Dismantling of existing structures like culverts, bridges, retaining walls, CC road and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P structure commprising of masomy, cssar urine the dismantled material, disposal and scaffolding wherever necessary,sorting and scaffolding wherever necessary.soringt unserviceable material and stacking the serviceable material with all lifts and lead of SO metres as directed by Engineer.In cement morta

Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with Sub-base coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with to wt a w electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour. machinery, lighting, guarding and maintenance of diversion

Providing and and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised sed Rigid PVC rain water pipes conforming to IS : 13592 Type A including to jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm

Ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades 1st quality Size 600mm x 600mm

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low levelwhite P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floorswherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

tructural steel work riveted,bolted or welded in built up sections, trusses and framed work, Structural steer including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing and Fixing Minimum 0.63mm thick GI corrugated sheets (minimum width of each sheet shall be 60 cm) for covering the barricading in one/ two rows one above another and painting in red and white stripes as per the specifications and directions of the Engineer Incharge with proper fixing arrangements with GI limpet washers nuts and bolts complete in all respect.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted olted including special shaped washers etc, complete.Electric resistance or induction butt welded tubes.

Providing and fixing double glazed hermetically sealed glazing in aluminium windows. sealed glazing in aluminium windows, ventiators and pariion eie. with 6 mm thick clear foat glass both side having 12 mm air ventilators and partition etc. with 6 mm thick clcar float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant gg drovimg ErM gasket, pen (Both primary and secondary sealant) etc. as per specifications, drawings and direction of om priimary and secondary sea Engineer-in-charge complete.