PROVN OF 01 X TOILET BLOCK CONSISTING OF 03 X TOILETS ROOM NEAR BLDG NO P 01 URC AT MH AND SPECIAL REPAIRS TO EXISTING FOOT PATH WITH COVERED SHELTER FROM BLDG OF APS TO VEHICLES PARKING AREA AT APS AND ADDN/ALTN TO SPECIAL REPAIRS OF MAIN ENTRANCE

Amount

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in hard dense soil complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 in foundations, filling and mass concrete complete all as specified and as directed.

S & F TMT steel bars 10mm dia and over, cut to length bent to shape required as in reinforcement to lintels complete all as specified and as directed.

All as per item No 03 here-in-before but 6mm to 8mm dia

All as per item No 03 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, plinth beams for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, columns for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of form work to sides of in floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc., complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work including sides of slab, n exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

M & L for RCC (design mix) M25, using 20mm graded stone aggregate as in footings, plinth beams and mass concrete complete all as specified and as directed.

M & L for RCC (design mix) M25, using 20mm graded stone aggregate as in Columns., pillars complete all as specified and as directed.

M & L for RCC (design mix) M25, using 20mm graded stone aggregate as in floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc., complete all as specified and as directed.

M & L for RCC (design mix) M25, using 20mm graded aggregate as in slabs supported on walls, beams etc., complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removal of surplus spoil to a distance n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n.exc 10cm wide complete all as specified and as directed.

M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 complete all as specified and as directed.

M & L for old size Brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M & L for Rendering 10mm thick in CM 1:3 on ceiling of concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for three coats of white wash on newly plastered surface on ceiling including Preparation of new plastered surfaces complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1:6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth complete all as specified and as directed.

Supply only integral water proofing compound.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including Preparation of new plastered wall surfaces complete all as specified and as directed.

M & L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on internal wall surfaces complete all as specified and as directed.

M & L for two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty to internal wall surfaces including Preparation of new plastered surfaces complete all as specified and as directed.

M & L Hardcore (stone) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even and smooth without using extra cement complete all as specified and as directed.

Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, at the junction of panels of plinth protection complete all as specified and as directed.

M & L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10cm girth in brick walls complete all as specified and as directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed.

All as per item No 31 here-in-before but of 25mm CPVC pipes complete all as specified and as directed.

All as per item No 31 here-in-before but of 50mm CPVC pipes complete all as specified and as directed.

S & F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

All as per item No 34 here-in-before but 50mm bore complete all as specified and as directed.

S & F PVC (SWR) floor trap with grating including jointing to solvent cement waste pipe 75mm dia complete all as specified and as directed.

All as per item No 36 here-in-before but multi floor trap complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed type 'B', in any length with rubber ring joints or solvent cement, laid in floor, 75mm bore complete all as specified and as directed.

All as per item No.38 here-in-before but 110mm bore complete all as specified and as directed.

M & L for glazed ceramic coloured joint free tiles in vertical surfaces, 350 x 250 x 7mm or 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement including cement mortar 10mm thick in CM 1:3 complete all as specified and as directed.

M & L Non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed bed 15 mm thick in CM 1:6 complete all as specified and as directed.

S & F Solid PVC door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification &drawing Note:- Existing wall edges will have to be finished properly in cement plaster 1:4. including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. (i) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii) PCC strip of section 5*5mm will have to be created at bottom including. smooth finish in each door opening.

S & F Factory Made Solid Panel PVC Door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail and jointed together with solvent cement, supplying & fixing in frame at site as per specification & drawing

S & F Butt hinges 100mm, type B11, cast brass, with aluminium hinge pin, bright polished complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F vitreous china wash down water closet (pedestal pattern) , white, of style and pattern as existing, complete with and including plastic seat cover, white fixed in repair complete all as specified and as directed.

Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply only PVC, syphonic action type, flushing cistern, low level, white, 10 ltrs, with inlet ball valve, float, handle and flush pipe including. brackets including 32 mm dia flush pipe complete all as specified and as directed.

S & F Vitreous China oval shaped wash basin counter type, white, size 550 x 400mm embedded on granite platforms including cutting for and pinning in ends of brackets or erecting stand brackets, including S & F of 32mm Waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms

Supply only Pillar taps 15mm, cast copper alloy with capstan heads, CP fancy type, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F 32mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc for wash basin complete all as specified and as directed.

S & F Bib taps Chromium plated 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed complete all as specified and as directed.

S & F stop valves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S& F Soap dish, vitreous China white, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screw complete all as specified and as directed.

S & F Vitreous China Urinal, Half stall type white coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment or mat over and including cement screed 15mm thick in CM 1:4 complete all as specified and as directed.

Rounding to edges of Granite/ stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S & F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.

S & F 40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed complete to walls, ceilings or in floors etc for urinal complete all as specified and as directed.

S & F Vitreous china urinal partition white of size 310 x 700mm, partition slabs terminating about 40cm above floor line complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S &F Toilet paper holder of stainless steel with flat recessed type fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S & F rotational moulded, triple layered, polyethylene water storage tanks of capacity 500 litres (cylindrical, vertical with closed top) hoisted and fixed in position all as specified including supply & fixing of 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F Powder coated anodised aluminium frame / shutters for doors, Partitions with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed.

S & F 4.0mm thick figured glass, pin head type as louvers in strips, width not exceeding 100mm fixed to aluminium frames of window / ventilator complete all as specified and as directed.

M & L Rendering 10mm thick on concrete surfaces finished even and smooth without using extra cement in CM 1:4 with liquid water proofing liquid as per manufacturers instructions on roof slab complete all as specified and as directed. (Note:- Water proofing measured and paid separately)

M & L for water proofing treatment with APP based polymeric membrane modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.50 Kg/Sqm reinforced with non woven polyester matt black finished over compatible primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures:- IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydro flame)/STP. Note:- The work shall be carried out be authorised applicators of manufactures.

Four course of roof treatment consist of as under:- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (ii) Laying of APP based membrane as specified thickness and weight. (iii) Applying one coat of Bitumen grade 85/25 @ 1.2 kg/Sqm. (iv) Applying two coats aluminium paints @ 100ml/sqm.

S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110mm complete all as specified and as directed.

All as per item No.73 here-in before but 75mm bore complete all as specified and as directed.

S & F PVC (SWR) bend 110 mm bore

All as per item No 77 here-in before but 75mm bore.

S & F PVC (SWR) bend 110 mm bore, with access door

All as per item No 79 here-in before but 75mm bore.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm bore pipe

All as per item No 81 here-in before but 75mm bore.

S & F PVC (SWR) junction double, (Double T) equal or unequal for 110mm bore pipe

All as per item No.81 here-in before but 75mm bore.

S & F PVC (SWR) vent cowl 110mm

All as per item No 85 here-in before but 75mm bore.

M & L for 150mm dia Reinforced concrete pipes NP3, laid and jointed complete with collars.

M & L for cement concrete 1:3:6 type C-2 bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, internal dia of pipe 150mm complete all as specified and as directed.

M & L for providing lintels upto 1.5m clear span on half brick partition wall with cement concrete Type B-1, 1:2:4 using 20mm graded stone aggregate including use of form work complete all as specified and as directed.

Surface excavation n.exc.30cm deep and avg 15cm deep and getting out in hard/ dense soil complete all as specified and as directed.

M & L 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for 50mm thick sand cushion for paver block complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS:15658-2006 of 80mm thickness M-40 Grade complete all as specified and as directed.

Providing precast cement concrete PCC 1:2:4 type B-1 using 20mm stone aggregate in window or door cills, lintels, use with masonry, string courses, copings. landings, cover slabs for man holes etc., and set in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good disturbed ground as in hard/dense soil complete all as specified and as directed.

M & L P.C.C 1:3:6 type C-2 (40mm graded aggregate) foundations, filling and mass concrete complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F for roof trusses (framed) trussed purlin, crane gantries, rails, and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe.410-W.Gde-E-250 quality A complete all as specified and as directed.

M & L two coat of synthetic enamel paint over a coat of zinc chrome primer to new steel surface including preparation of surfaces of any description over 10cm width or girth complete all as specified and as directed.

M & L machine pressed Pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming to IS: 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment complete all as specified and as directed.

Dismantling of (corrugated, semi-corrugated, etc) Asbestos cement sheeting in roof coverings complete all as specified and as directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Excavation over areas not exc 1.5 mtr in depth and getting out in hard/ dense soil complete all as specified and as directed.

Excavation over areas exc 1.5 mtr in depth and n.exc 3.0 mtr depth getting out in hard/ dense soil complete all as specified and as directed.

M & L for PCC 1:1.5:3 for base of footing in foundation, filling and mass concrete complete all as specified and as directed.

M & L for RCC (Design mix) M-25 (20mm graded aggregate) as in Arches over 1.5m span complete all as specified and as directed.

Use and waste Formwork for rough finished surfaces to soffits of Arches suspended arches sides landings and similar work complete all as specified and as directed.

M & L rendering 12mm thick on fair faces of brick work or concrete surfaces of Ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for setting coat 3mm thick trowelled to even and smooth finish CM 1:2 complete all as specified and as directed.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting's, drip moulds and similar work exc 15cm but n.exc 30cm in width or girth; including cutting to edges, all mtrs and stopped ends complete all as specified and as directed.

Pargetting flues exceeding 0.20sq. M in sectional areas, with 20mm thick lime mortar (1 lime:2 sand:l cow dung) and coring complete all as specified and as directed.

M & L for Providing and applying plaster of paris of 2mm thickness over plastered surfaces to prepare the surface even and smooth complete all as specified and as directed.

M & L preparation of new or previously untreated brick or concrete surfaces surface any description over 10cm width or girth not otherwise described and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

S & F for framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. (Payment for providing grooves shall be made separately).

M & L for Pre-cast cement concrete block masonry type B-1 1:2:4 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.

S & F for stainless steel display letters size of 30cm x 15cm complete all as specified and as directed. (Content of letters ARMY PUBLIC SCHOOL CHENNAI PIN 600032)

Demolition brick work built in cement mortar including all quoins, arches Pillars etc., complete all as specified and as directed.

M & L Brick work with fly ash bricks old size straight or curved on plan exc 6 mean radius, built in cm 1:4 complete all as specified and as directed.

M & L Rendering in cm 1:4, 15mm thick on fair faces of brick work, including finishing the surface even and smooth without using extra cement with WPC Note:- WPC shall be measured and paid separately

M & L 15mm thick rendering in CM 1:4 on brick wall built in cm including finished even and smooth without using extra cement complete all as specified and as directed.

M & L preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Use and waste form work to sides and soffits of Lintel/beams over 1.5m span complete all as specified and as directed.

Use and waste form work to edges of concrete flats not exceeding 20cm thick rough finished surfaces complete all as specified and as directed.

S & F PVC Water storage tank 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed SSR part I complete all as specified and as directed.

S & F 25mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 25mm 255gms) complete all as specified and as directed.

S & F 32mm outer di of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying ion floors complete all as specified and as directed.

S & F 25mm gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and as directed.

S & F pre painted Galvalume aluminium zinc coating GI based corrugated PUF insulated roofing panel thickness of 30mm to 80mm in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S & F for Plain, galvanised, mild 0.80mm thick steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S & F Framed brackets of angles, tees or flat Iron with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n.exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L two coat of synthetic enamel paint old steel surface including preparation of surfaces of any description over 10cm width or girth complete all as specified and as directed.

S & F 18mm plywood, grade BWP, type Fixed with screws to timber frame work working benches and office cabinets complete all as specified and as directed.

S & F 0.9mm thick decorative type 1, of surface finish colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and as directed.

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanised 30mm (width of flap) when open complete all as specified and as directed.

S & F second class Hardwood plain fillets triangular in section clean swan secured with screw sectional area exc 13 sqcm and n.ecx 25 sqcm complete all as specified and as directed.

S & F Brass Drawer handles, projections drop(50mm to 65mm) on screwed plate complete all as specified and as directed.

S & F 40mm dia, Cupboard knobs brass polished fixed with nut, screw and washer of mild steel complete all as specified and as directed.

M & L for 2nd class Hardwood fillets plain square rectangular in section clean swan, secured with screws not exc 3 Sqcm complete all as specified and as directed.

Preparation of new wooden surfaces of any description not exc 10 cm width and girth unconnected with other painting and varnishing with synthetic varnish over thin varnish or shellac varnish complete all as specified and as directed.

M & L for Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed:-

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 3 pin 5 Amps switch socket on independent board

One 3 pine 5 amps switch socket on same board along with other switches.

All as per item No.143 herein before but with 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed.

M & L for sub main wiring with PVC insulated, FRLS 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed.

All as per item No.145 herein above but with 2 runs of 2.5 sqmm and one run of 2.5 sqmm earth wire in PVC conduit complete all as specified and as directed.

Note for item Nos.143 to 145:- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be includingusive wherever required cutting chases etc.

S& F Ceiling rose surface type, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and as directed.

S & F Modular type socket Socket, 6A - 2/3 pin combined 2 module controlled by one switch complete all as specified and as directed.

S & F socket outlet modular type multipurpose 3 pin, 15/16 amp and one pin, 5 amp controlled by one switch complete all as specified and as directed.

S & F modular switch 1 way 6A, 1 module

S & F modular switch 1 way 16A, 1 module

S & F Modular white cover with plate with frame 3 module including matching with white cement work if necessary.

S & F Modular white cover with plate with frame 4 module including matching with white cement work if necessary.

S & F Modular white cover with plate with frame 6 module including matching with white cement work if necessary.

Supply and Modular flush box 3 module

Supply and Modular flush box 4 module

Supply and Modular flush box 6 module

S & F MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

Supply & Fix MCB Four pole 415 volts, 40 amps 'C' Curve 10 kA Capacity complete all as specified and as directed.

S & F MCB SP, 240 Volt,10-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed.

S & F LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make:- Havells cat No.ENDURA LINEAR NEO BS22 WLED 865 SPCWH/ PHILIPS cat No B1021LED25S6500PSUGRST/ CROMPTON cat No. LDRR24-CDL/ BAJAJ Cat No. BCLAB SP 22L LEDCWPCSD.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- Havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL.

S & F energy saving LED security light fitting 30W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection complete all as specified and as directed. Make:- Havells cat No- ENDURA PEARL SL30W LED 757SASY TOPCMP/ HALONIX cat no HLSLD-09-30CWL-R/ CROPTON cat no. LSTS-30-CDL/NL-M/ Wipro cat No.LR02-331-XXX-57-XX 30Watt.

S & F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed.

Supply, lay/ spread in trenches, sieving sand including cleaning, spreading, levelling, punning for laying /cushioning of cable complete all as specified and as directed. Note:- Punned thickness shall be measured and paid.

Supplying and laying burnt bricks class 'B' standard size for protection of cable complete all as specified and as directed.

M & L for Cement concrete Type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete including form work complete all as specified and as directed.

M & L for Cement concrete Type C-1 1:3:6 (20mm graded aggregate) for coping to the poles with finishes with out using extra cement complete all as specified and as directed.

Supply and Laying in trenches / poles / wall etc., LT UG Cable XLPE insulated, armoured, heavy duty with multistranded aluminium conductor, 1100 volts grade conforming to IS specifications and of the following sizes:- Note:- Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc., shall be measured and paid separately under relevant item:-

(a) LT UG cable 4 core 10 sqmm

(c) LT UG cable 4 core 25 sqmm

Supply and installation of 15W LED Bollard light TLLUM series, IP 65 rating, 3000K warm white, 4 KV surge protection, Total Harmonic Distortion <10%, Impact Protection IK07, Colour Rendering Index (CRI) >70, out door luminaires, New generation energy saving & environmental friendly long life aesthetically designed aluminium land scape luminaire for diffused lighting with high power LED Bollards as light source and connecting in the existing cable complete all as specified and as directed. Make:- Bajaj cat part No-BAJAJ TLLUM 15W 30K 80 C3 MS S or equivalent

Supplying and fixing in replacement of pole mounted Sheet Moulded Compound (SMC) Box weather proof type with hinged type door off white colour of size not less than 185 X 100 X 290mm (LxBxH) comprising of 1 No MCB 6A and 1 No neutral link, bottom to top open front door and 25 Amps heavy duty connector blocks complete fixed on pole with suitable two nos clamps, bolts and nuts complete all as specified and as directed.

S & F Down lights and spotlights lux space pro deep recessed down lights range with exttremely low glare and high quality faceted for superior lighting and aesthetics complete all as specified and as directed. Make:- Philips cat no-DN590B LED6S-6500 PSU WH or equivalent.

S & F Arch space light Suspended cylindricals with extruded aluminium housing and a superior powder coated finish complete all as specified and as directed. Make:- Philips cat part no-SP320P LED20S-6500 PSU NB DIA 100 WH or equivalent.

Supply and installation of new 25W LED 5700K New generation Post top energy saving & environmental friendly long life versatile spun aluminium IP65 roadway luminaries with high power LED as light source and connecting in the existing cable complete all as specified and as directed. Make:- Bajaj cat part no-BGCTN 25W LED WW or equivalent.

S & F Street light panel Timelite Distribution Board 32 A 3 pole /230 V -Analog Time Switch having following features, Phase-3, Frame size-1, Max Load(KW)-6, Timer Digital 24 Hr Contactor rating(A)-65TP, MCB Rating 63 TPN, Ref Standard Degree of Protection IP 54(Dust and Vermi Proof complete all as specified and as directed.

Supply and laying 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 3 core 2.5 sqmm nominal cross section in service connections/ street light connection from junction box to street light fittings complete all as specified and as directed.

DJ Group (BID ID -3502006)