REPAIR/MAINT OF FANS, EXHAUST FANS AND GEYSERS AT

Amount

Taking down ceiling fan of 1200/1400mm sweep from existing position, opening and reassembling after repairs/replacement of defective spare parts like bearing, bushing, capacitor, canopy, clamps, blades etc (except rewinding) including cleaning, greasing and refixing in position as directed and connecting with new flexible twin twisted copper conductor wire of size 0.75 sqmm from connector to ceiling fan and testing complete all as specified and directed. Note: Spare parts as required shall be measured and paid seperately under relevent items as supply only.

Taking down Exhaust fan of 280mm to 450mm sweep from existing position, opening and reassembling after repairs/replacement of defective spare parts like bearing, bushing, capacitor, clamps, blades etc (except rewinding) including cleaning, greasing and refixing in position as directed and connecting with new flexible twin twisted copper conductor wire of size 0.75 sqmm from connector to exhaust fan and testing complete all as specified and directed. Note: Spare parts as required shall be measured and paid seperately under relevent items as supply only.

M&L, Rewinding of ceiling fan of 1200mm sweep with super enamelled copper wire as per existing gauge including necccessary heating , varnishing etc complete all as specified and directed.

M&L, Rewinding of ceiling fan of 1400mm sweep with super enamelled copper wire as per existing gauge including necccessary heating , varnishing etc complete all as specified and directed.

M&L, Rewinding of exhaust fan of 280mm/300mm sweep with super enamelled copper wire as per existing gauge including necccessary heating , varnishing etc complete all as specified and directed.

M&L, Rewinding of exhaust fan of 380mm/450mm sweep with super enamelled copper wire as per existing gauge including necccessary heating , varnishing etc complete all as specified and directed.

M&L, Rewinding of wall mounted fan of 400mm/450mm sweep with super enamelled copper wire as per existing gauge including necccessary heating , varnishing etc complete all as specified and directed.

Supply only fan capacitor 2 MFD, 220/240 volts complete all as specified and directed.

Supply only fan capacitor 2.50 MFD, 220/240 volts complete all as specified and directed.

Supply only fan capacitor 3.15 MFD, 220/240 volts complete all as specified and directed.

Supply only fan capacitor 4 MFD, 220/240 volts complete all as specified and directed.

Supply only Gun metal bush suitable for ceiling fan/exhaust fan/ wall mounted fan as per existing shape and size complete all as specified and directed.

Supply only ball bearing NO 6201 for ceiling fan/exhaust fan/ wall mounted fan/ pedestal fan complete all as specified and directed.

Supply only ball bearing NO 6202 for ceiling fan/exhaust fan/ wall mounted fan/ pedestal fan complete all as specified and directed.

Supply only ball bearing NO 6203 for ceiling fan/exhaust fan/ wall mounted fan/ pedestal fan complete all as specified and directed.

Supply only ball bearing NO 6204 for ceiling fan/exhaust fan/ wall mounted fan complete all as specified and directed.

Supply only holder suitable for fan capacitor with 5 amp, 3 way connector as per existing size and shape complete all as specified and directed.

Supply only fan shaft for ceiling fan as per existing size complete all as specified and directed.

Supply only fan canopy for ceiling fan 1200mm/1400mm sweep as per existing size and shape complete all as specified and directed.

Supply only fan clamp made of mild steel flat iron (approximate length 5cm to 6cm) suitable for fixing with down rod with 2 nos nuts and bolts of appropriate size, safety pin and locking pin complete all as specified and directed.

Supply only rubber real ( bush) for hanging of ceiling fan complete all as specified and directed.

Supply only rubber PAD (bush) for mounting of exhaust fan of size 280mm to 450mm sweep (set of four) complete all as specified and directed.

Supply only louvers suitable for exhaust fan as per existing shape and size complete all as specified and directed.

M&L, for painting of ceiling fan, exhaust fan of any size and make with one coat of DUCO paint with spray painting machine including filling of cavities with one coat of filler complete all as specified and directed.

S&F in repair Exhaust fan,250mm sweep, plastic body single phase including connection complete all as specified and directed. . Make-Usha Cat part No-250MM CRISP AIR LX EXHAUST FAN or its equivalent

Disconnecting and taking down carefully geyser of capacity 25/50 litres (horizontal/vertical type) of any make after properly disconnecting from inlet/outlet water supply line and making necessary servicing/ repairing /overhauling and reinstalling in position duely connected and tested complete all as specified and directed . Note: (i) Servicing includes repairing of small leakages of copper shell, replacement of worn out GI studs, nuts, washers, cleaning of inner copper shell and outer cover with replacement of glass wool, rubber gasket and washer. (ii)Spare parts as required shall be measured and paid under relevent items as supply only.

S&F in repair thermostat and suitable lamp indicators for 25 litres capacity geyser suitable for 230 volts, AC , 50 Hz supply and adjustable temperature control from 40 to 70 degree centrigrade including rubber washers and all necessary electrical connection complete all as specified and directed.

S&F in repair thermostat and suitable lamp indicators for 50 litres capacity geyser suitable for 230 volts, AC , 50 Hz supply and adjustable temperature control from 40 to 70 degree centrigrade including rubber washers and all necessary electrical connection complete all as specified and directed.

S&F in repair heating elements 2000 watts as per sample suitable for geyser of 50 litres capacity complete all as specified and directed.

S&F in repair heating elements 1500 watts as per sample suitable for geyser of 25 litres capacity complete all as specified and directed.

S&F in repair hot and cold pipe 15mm bore 450mm long with brass sockets at both end including washers complete all as specified and directed.

S&F in repair apparatus plate assembly ( syphon type) of approved quality suitable for geyser of 50 litres capacity ( horizontal or vertical type) complete all as specified and directed.

S&F in repair apparatus plate assembly ( syphon type) of approved quality suitable for geyser of 25 litres capacity ( horizontal or vertical type) complete all as specified and directed.

S&F in repair inner shell made out of copper sheet of approved quality suitable for geyser of 50 litres capacity ( horizontal or vertical type) complete all as specified and directed.

S&F in repair inner shell made out of copper sheet of approved quality suitable for geyser of 25 litres capacity ( horizontal or vertical type) complete all as specified and directed.

S&F in repair for wall fastener of size 150mm long, 8mm dia with double washers properely grouted on wall and making good disturbed surfaces in cement mortar 1:4 for fixing of geyser complete all as specified and directed .

M&L, Complete removal of existing paint and preparing surfaces of geyser 25 litres capacity, applying one coat of anti corrosive paint internally and two coats of white synthetic enamel paint externally with using spray painting machine including writing letters on outer surface as per existing pattern with black paint complete all as specified and directed.

M&L, Complete removal of existing paint and preparing surfaces of geyser 50 litres capacity, applying one coat of anti corrosive paint internally and two coats of white synthetic enamel paint externally with using spray painting machine including writing letters on outer surface as per existing pattern with black paint complete all as specified and directed.

S&F in repair damaged top / bottom plates of geyser 25/50 litres capacity complete all as specified and directed .

Disconnecting and taking down old geysers of any capacity and make from existing position and relocating to new location for fixing or depositing to MES storeyard complete all as specified and directed.

DEEP CONSTRUCTION

PRITHWI BUILDERS