Renovation of Toilets at VSI Airport, Port Blair

Amount

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of required size and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade.

Dismantling work in wall and floor tile in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size (min. 300 X 450 mm) as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Providing and laying Digital glazed vitrified tiles matt finish in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness. size of tiles 600x600 mm.

Providing and Fixing Soap dispenser of Jaquar (ACN-1135N) or Equivalent make with Glass Bottle all complete as per instruction of EIC.

Providing and Fixing health Faucet of Jaquar (ALD-CHR - 585) or Equivalent make cast copper alloy fancy type chromium plated with stand and flexible pipe all complete as per instruction of EIC.

Providing and fixing toilet paper holder of Jaquar (ACN-1151N) or Equivalent make: C.P. Brass all complete as per instruction of EIC.

White Vitreous China oval Under counter wash basin of Jaquar (CNS-WHT-705) or Equivalent make size 595x420x200mm with single 15 mm CP. brass pillar taps quarter turn of jaquar make (DRC-37001) or equivalent with fixing accessories like coupling etc. all complete as per direction of Engg-in-charge.

Providing and fixing white vitreous china pedestal type water closet of Jaquar (CNS-WHT-755SN) or Equivalent make (European type) "S" or "P" with seat and lid, 6 litre (Double push) low level wall hung white P.V.C flushing cistern of Jaquar with drainage l-bend with gasket (CNS-WHT-207) or Equivalent make with fittings & C.l.brackets, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with marked white solid plastic seat and lid :

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 6 litre (Double push) wall hung low level white P.V.C. flushing cistern of Jaquar with drainage l- bend pipe with gasket (WHC-WHT-184L) or Equivalent make , including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing white vitreous china flat back half stall urinal of Jaquar (URS-WHT-13257) or Equivalent make size 580x380x350 mm with fittings, standard size spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.P. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required.

Providing and fixing 6mm thick Clear mirror of approved make on the wall, in required size and shape, at all levels as per direction of E-I-C

Providing and fixing Washrooms Signage for Men & Women including Design, Print, Image Stickering sandwiched between clear Acrylic sheets, fastened with 04 nos. SS Studs all complete as per direction of E-I-C.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar.

Supplying and installing modular toilet cubicles of Merino Bossco or Equivalent make of size of cubicle as per drawing(W)X (D) x 2100 mm(h) door size1925 mm(height) x 610 mm (width), divider size 1945mm (height) - over all height of cubicle 2100mm including bottom Gap of 100 mm.Accessori - S.S " U'' Channel,S.S '' F'' Channel (Only Corner Unit), SS top rail, Coat Hook, S.S privacy Thumb turn c/w Occupancy Indicator, S.S Door Knob, SS spring loaded butt Hinges with cover - S.S Adjustable Foot- 316 Grade, Rubber Lining for Groove, S.S. Screws 304 G & P.V.C Wall Plugs. Approximate drawing is given in NIT with size ranges varing from 1.15x1.62 to 1.2x2.3.

Wall/ Ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coat.

Providing and fixing at ground level precast cement concrete Hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 Stone Dust ), cost of required centering,shuttering complete. 1:3:6 (1 cement : 3 stone dust : 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position of specified grade cement concrete excluding the cost of centring shuttering - all work upto plinth level. 1:2:4( 1 cement : 2 stone dust: 4 graded stone aggregate 20 mm nominal size).

Extra for providing opening of required size & shape for wash basins /kitchen sink in kitchen platform, vanity counters and similar location in marble /granite/stone work including necessary holes for pillar taps etc. Including rubbing and polishing of cut edges etc. complete.

Providing and fixing uplasticised PVC connection pipe with brass unions: 60 cm length 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer , geyser points, bib cock , stop cap, CP Cap and Nipple etc. of approved quality conforming to IS:8931 15 mm nominal bore.

Providing and fixing CP extension nipple (size 15mmx50mm) for, fittings of approved quality and approved make as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing design frame for washroom mirror over 6mm thick hardboard in dupont corian Glacier white finish or equivalent make of frame thickness 6mm and 15 cm wide in border around mirror on the wall , in required size and shape, at all levels as per direction of E-I-C

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes.

City Construction Company