Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L1 | Accepted-AOC SINCE L1 BIDDER | |
| 2 | L2₹26.7 L+₹2.8 L (11.9%)Rejected-Finance | L2 | Rejected-Finance SINCE L1 NOT BIDDER | |
| 3 | L3₹27.2 L+₹3.3 L (13.8%)Rejected-Finance | L3 | Rejected-Finance SINCE L1 NOT BIDDER | |
| 4 | L4₹27.5 L+₹3.6 L (15.1%)Rejected-Finance A 4 TARINI APARTMENT PHASE I KILBURN COLONY HINOO DISTT RANCHI JHARKHAND 834002 | RANCHI | RANCHI | JHARKHAND | 834002 | L4 | Rejected-Finance SINCE L1 NOT BIDDER | |
| 5 | L5₹27.5 L+₹3.6 L (15.2%)Rejected-Finance | L5 | Rejected-Finance SINCE L1 NOT BIDDER |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR OLD CANTT
HQ CWE OLD AMRITSAR CANTT
SPL REPAIR TO BLDG NO P-98 NEAR STN HQ AT AMRITSAR CANTT
2023_MES_598329_1
CWE/ASR-12/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AMRITSAR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AMRITSAR
₹69,800
Yes
20 Jul 2023
26 May 2023
1 Jul 2023
26 May 2023
24 Jun 2023
19 Jun 2023
Amount
Taking down cement plaster on brick, concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Of any description complete all as specified and directed.
M&L for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement complete all as specified.
M&L for 10mm thick cement plastering in CM 1:3 on ceiling surfaces other than fair surface, finished the surfaces even and fair without using extra cement complete all as specified.
M&L for 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement complete all as specified.
M&L preparation of new plaster surface and applying two coats of Oil bound distemper on wall over 2mm thick wall putty(averaging) complete all as specified and directed by EIC.
M&L preparation of new plaster surface and applying two coats of white wash on wall complete all as specified and directed by EIC.
M&L preparation of new plaster surface and applying two coats of white wash on ceiling complete all as specified and directed by EIC.
M& L for one coat of white wash on old treated ceiling surfaces complete all as specified and directed by EIC
M&L preparation of old painted surfaces including removal of all existing treatment and applying one coat of plastic emulsion paint over Brick wall or Plastered surfaces to match the existing treatment complete all as specified and directed.
M&L for complete removal of existing treatment of walls/pillars/cornices and applying two coat of weather proof exterior paint over a coat of primer, making smooth surface complete all as specified and directed.
Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) complete all as specified.
All as per item No. 11 but exc 1.50sqm but n.exc 4Sqm complete all as specified and directed.
Factory made single extructed WPC but frame size 50x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) complete all as specified and directed.
S&F mild steel work Fe 410-W(Gde-E- 250) quality-A Fe in framed work as in door frame, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening complete all as specified and directed.
S&F steel cupboard shutter 1.25mm thick sheet, factorymade, prepainted with adequate number of coats fixed to steel frames on site complete all as specified and directed.
S& F Ball bearing for rolling shutters complete all as specified and directed.
S & F Safety lever locks mild steel with 4 levers complete all as specified and directed.
Supply and fixing10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet Suitably placed fixing in Aluminium door etc complete all as specified and directed.
S&F Anodised aluminium frame for doors,windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Tee etc section for weighing not less than 1.4 kg/RM complete all as specified and directed
S&F Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifiedNote:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely.
S&F Providing and fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats,complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely.
S&F 5.5 mm thick sheet glass ordinary quality in square or rectangular in size n.exc .5 sqm each in aluminium door or window shutter including taking out old damaged glass pane complete all as specified and directed
S&Ffigured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty.
S&F for aluminium door & window, aluminium wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed
S&F 5 mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej and all other specified makes in appx 'B'.
S&F Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.
S&F Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mm etc complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.
S&F 125 mm long Aluminium handles, cast type anodised complete all as specified and directed.
S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.
S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified.
Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for refixing in any position complete all as specified and direced.
-ditto- but 20mm bore of pipe
S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked complete all as specified.
S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked complete all as specified.
S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.
S&F in repair stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified.
S&F in repair angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified.
S&F in repair vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
S&F of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately.
Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.
Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) complete all as specified and directed.
Supply and fixing Chromium plated Health faucet in repair with 1 metre long chain complete all as specified and directed.
S&F sheet glass shelf assembly 60 cm oval shape consisting 5.5 mm thk 8mm thk glass with brass bracket including stainless steel railing, fixed to wall as complete all as specified and directed.
Supply and fixing Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minium weight 190 gms) complete all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixinf approved anodised aluminium standard section around the opening, all complete as per requirements and direction of Engr-in-charge.
S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
Supplying and fix in repair viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections complete all as specified and directed
Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required complete all as specified and directed.
S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor height complete all as specified and directed.
S&F PVC (SWR ) bends 75 mm bore any radius complete all as specified and directed.
S&F PVC (SWR ) vent cowl 110 mm bore complete all as specified and directed.
M&L PVC (SWR ) floor trap 110/75 mm plain with grating incl. jointing with solvent cement as per site requirement complete all as specified and directed.
S & F Stack clamps (110 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Ditto but 75 mm complete all as specified and directed.
Supply and fixing in repair cutrain rod 20mm dia of Mild steel CP with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed.
Demolation of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall complete all as specified and direced.
M&L brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
All as per Srl item No 63 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar) complete all as specified and directed.
M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed.
Demolition of Stone slabs and tiles of laid, beded and pointed of any mortar in any description or thickness in floors, aprons etc. Complete all as specifed an directed by EIC.
M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level complete all as specified an directed.
M&L for 75mm thick cement cocnrete type C-1 (1:3:6) (20mm graded aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by EIC.
M&L for 75 mm thick cement concrete type D-2, 1:4:8 using 40mm stone aggregate as in sub base all as spcified and directed by EIC.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M& L joint free Non skid coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm to 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as spcified and directed by EIC.
M& L for above item no. 73 in vertical surface such as skirting, dados and risers to steps etc but including 10mm thick rendering in cement mortar 1:4 including taking down cement plaster/skirting complete all as specified and directed by EIC.
M&L for glazed ceramic coloured tiles in vertical surface of size 350x250x7mm/ 450x350x7mmmm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles complete all as speciifed and directed by EIC.
M&L for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exc 0.42 but n exc 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed.
All as per Ser item No 76 here-in-before but as in skirting over 10mm thick cement plaster in 1:4 complete all as specified and directed.
Demolition of cement concrete (Reinforcment) of any description all as specified & directed complete all as specified and directed.
M&L for RCC in 1:2:4 type B-0(using 12.5 mm graded stone agg) as in chajjas facia, shelves, lintel etc and similar work all as spd complete all as specified and directed.
Form work to rough finished surface of concrete flat to soffits of shelve, chajja, fins etc including supports over hangs all as specified & directed.
S&F 10mm dia over TMT bar cut to length bent to shaps including cranking binding spirraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securing with clips as spd complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius with access door complete all as specified and directed.
Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
Dismantling boarding , any description , fixed in any position with screws complete all as specified and directed.
S&F GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and M&L for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening complete all as specified and directed.
M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.complete all as directed
M&L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit medium grade of size not less than 20mm dia including accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls incl suitable white cover plate for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as directed NOTE: (i) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc & cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate
All as per srl item No.88 here in before for One light point/Fan point controlled by one way switch
All as per srl item No.88 here in before for One bell/buzzer point controlled by one bell push button independent.
All as per srl item No.88 here in before for One 5 Amps outlet point on same board with other switches/sockets
All as per srl item No.88 here in before for One 3 pin 5 Amps socket outlet on independent board.
All as per ser item No. 88 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
All as per ser item No. 88 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
S&F modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed
S&F modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed
S&F modular bell push, one way, 6 Amps, 240 Volts, 1 module complete all as directed by Engr-in-Charge
S&F modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as directed
S&F modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as directed
S&F modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as directed
S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified
S&F buzzer, Ding Dong, AC, 240 Volts, single pole, fixed over & including pressed steel sunk box of size 175 x 100 mm duly covered with 3mm thick bakelite sheet complete all as directed
S&F Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including 10cm x 10cm presto plastic board for resting to holder including S&F 01 x 10/12 watts LED lamp, 230 volts complete all as specified and directed
S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.
Taking down carefully existing serviceable Ceiling fan/Wall mounted fan of any sweep and size from fan hook, disconnecting and sealing cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod as directed at site after rewiring including clamps, hooks, holdfasteners etc. including servicing & painting of ceiling fan with one coat of approved quality synthetic enamel paint in existing colour including filling cavities with filler after cleaning all dust, including writing MES No. and making electric connection from ceiling rose or connector to ceiling fan and testing complete
Taking down existing serviceable exhaust fan from wall, disconnecting and sealing cable end, etc., removing the fan for keeping in safe custody, fixing the exhaust fan as directed at site after rewiring including servicing and making electric connection from ceiling rose or connector to exhaust fan and testing complete
Taking down carefully existing unserviceable Split type AC of any capacity, ceiling cable end, etc., removing the AC for keeping in safe custody and refixing the same as directed by Engr-in-Charge after rewiring with provn of new suitable MS bolts, suitable size copper tube as required (no brazing will be entertained), grouted to wall and connecting up including servicing & gas filling and making good to the disturbed surface in cement morter 1:3 or cement concrete 1:2:4, Type B-1 as required and testing complete all as directed NOTE: Cost MS bolts, nuts & washers, copper tube as per site requirement, servicing, gas filling, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of AC will be deemed to be included in the quoted rate
Dismantling and taking down carefully existing serviceable tube light single/double of any wattage or size tube light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for keeping in safe custody, refixing the same at its original location after wiring, including making electric connection from connector to light fittings & connecting up, testing the same for smooth operation complete all as specified and directed
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F Dusk & dawn roadway luminaries 35 Watt, 230 V AC, 6000K outdoor type with epoxy black powder coated sheet, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 40mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including connecting and testing all as directed
S&F PLUTO NEO LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S&F COMET ROUND Slim surface mounted round shape 12 watt 220 volts AC, 6000K recessed type LED luminaire, die-cast aluminium body with specular finish aluminium reflector of fixture size 107x78mm and ceiling cut out of 92mm dia with IP-20 protection with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, remote & accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan and writing MES No. complete all as specified and directed
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 300mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete all as specified and directed
S&F Wall mounted fan of 400mm sweep plastic body and blade including pull cords for speed regulation & wide oscillation control, with 1300 RPM, 60 air delivery, 50 Watt, colour as per the direction of Engr-in-Charge complete all as specified and directed
M&L for distribution board, vertical, made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, VTPN 6 way, 415 volts grade with insulated rated bus bar assembly with isolated neutral bar, door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing MCCB, MCB TPN/TP/SPN/SP etc, including taking down existing unserviceable one and removing from site complete all as directed. NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB including suitable thimble/lugs to be fixed for incoming & outgoing connections and the rate shall be deemed to be included in the quoted rates.
Supply and fixing MCCB triple pole and neutral (four pole) 100 Amps, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 25 KA including making incoming and outgoing connections complete all as specified and directed
M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB including suitable thimble/lugs to be fixed for incoming & outgoing connections and the rate shall be deemed to be included in the quoted rates.
All as per ser item No. 116 above but for SPN 12, 240 volts grade with 200 Amps insulated rated busbar
All as per ser item No. 116 above but for SPN 8, 240 volts grade with 200 Amps insulated rated busbar
S&F MCB single pole 5 to 32 Amps, 240 volt, 10 KA, C curve with IP-20 protected terminals including contact indication window for visual indication and safety of operator, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., including taking down old unsv one from the site complete all as directed
All as per ser item No. 119 above but for MCB SPN 32 Amps
All as per ser item No. 119 above but for MCB TPN 40 to 100 Amps
All as per ser item No. 119 above but for MCB TP 40 to 63 Amps
Supply and fixing sub main wiring with 4 runs of 16.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 2 runs of 16.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete all as directed NOTE: Four runs of 16.0 sqmm copper cable and two runs of 16.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length
All as per ser item No. 123 above but for sub main wiring with 4 runs of 10.0 sqmm & 2 runs of 10.0 sqmm as earth wire complete all as specified and directed.
All as per ser item No. 123 above but for sub main wiring with 2 runs of 6.0 sqmm & 1 run of 6.0 sqmm as earth wire complete all as specified and directed.
M&L for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.
Santokh Singh and Associates
GEE EMM ASSOCIATES
Sai Construction Co.
ESS KAY BUILDER
Saini Constructions
M/s Vijay Construction Co.
amardeep traders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .