Supply, installation, testing and commissioning of electro-mechanical equipments at water supply scheme Samboora Old

Amount

1. WSS Samboora Old (Adv. Cost: Rs. 30,57,700/-)

Supply, installation, testing and commissioning of 1440 rpm Horizontal pumping unit as per IS 1520 with following specification:- Pump:- 1.Type :- Horizontal split casing /Multi stage Material of construction 1.Impeller:- Stainless steel 2.Shaft:- SS410 3.Pump casing:- Cast Iron The pump shall confirm to IS-1520 code MOTOR :- A) Type :- Horizontal squirrel cage Induction Type B) No of phases: 3 phase 415 V+10%,50 Hz, AC supply C) Winding:-Copper wound squirrel cage D) Type of enclosure:-SPDP/TEFC E) Method of cooling:- Air cooled with fan mounted F)Method of Starting: star delta Motor Rating: 75HP (Pump 20000GPH) Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item and pumping unit is to be approved from the concerned Sub Divisional office before procuring. Detailed specifications as per cluase 5 of SBD

Supply, installation, testing and commissioning of new Horizontal pump along with a common base frame, similar to existing pump as a replacement to existing worn out pump and as per IS 1520 with following specification:- Pump:- 1.Type :- Horizontal split casing /Multi stage Material of construction 1.Impeller:- Stainless steel 2.Shaft:- SS410 3.Pump casing:- Cast Iron The pump shall confirm to IS-1520 code The new pump should fit with the existing motor on the common platform Capacity of Pump 20000GPH at 90M head Note: Test certificate having the Serial No. of the Pump along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item and pump is to be approved from the concerned Sub Divisional office before procuring. Detailed specifications as per cluase 5 of SBD

Providing, fitting, testing and commissioning of MN 140 FASD Starter, with MNX 140 contactor, MN12 relay, relay range 90-150A,, 3 pole, 3phase, 50HZ

Providing and fitting of outdoor type Electric Sub Station by way of S/I/T/C of 11/0.433 KVA , 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 , copper wound. Specifications conforming to IS : 1180 (Part 1) 2014 with latest amendments ertificate Rating:250KVA HT Transformer, 3 phase (Level 2). Manufactures test certicicate to be apended and rest of specification as per cluase 26 of SBD NOTE: The scope of the work shall include obtaining of necessary inspection/clearance certificate from the concerned department for all the required equipment. The testing and commissioning shall be completed only after obtaining above certificate

Providing, fitting, testing and commissioning of voltage stabilizer as per specifications below: Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply Rest technincal specification as per cluase 45 of SBD Rating::150KVA

Providing, fitting, testing and commissioning of MN 110 FASD Starter, with MNX 110 contactor, MN 5 relay, relay range 66-110A, 3 pole, 3phase, 50HZ

Providing, installation and testing of manual type triple spur gear chain pulley block along having following features . Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears. Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below : Make = Reputed make Capacity = 3 ton (P) No. Of load chain falls = 2 or above Min. Height of lift = 6 M