Repair works to the existing multipurpose hall at Periakalapet in Kalapet Constituency

Amount

CODE NO.4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement: 2coarse sand : 4 graded stone aggregate 20mm nominal size)

CODE NO.4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement : 5coarse sand : 10 graded stone aggregate 40mm nominal size)

CODE NO.9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc., Complete : - 300 x 16mm.

CODE NO.9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : -300x10mm

CODE NO.9.134.2 Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete

CODE NO: 10.27 Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixing in position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nominal size) including one coat of priming coat etc. complete

CODE NO: 13.50.3 Applying priming coat with ready mixed red oxide Zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works.

CODE NO: 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – Two or more coats on new work

CODE NO.14.5.1 Renewing glass panes, with putty and nails wherever necessary - Float glass panes of thickness 4mm

CODE NO. 14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coat on old work.

CODE NO. 14.67.1 Finishing walls with Premium Acrylic Smooth exterior paint of required shade - Old work (Two or more coats applied @ 1.43 lts/10 sqm) over existing cement paint surface.

CODE NO.21.1.2.2 Providing and fixing aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminimum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminimum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings. (Glazing and panelling to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

E Aravindan

SENTHIL KUMAR

J Palanivel

GANESAN

P RAJENDIRANE

Balaraman

R Parthasarathy