Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAccepted-AOC 10 SHANTI VIHAR RUDRAPUR UDHAM SINGH NAGAR UTTARAKHAND 263153 | UDAM SINGH NAGAR | UTTARAKHAND | 263153 | ₹1.9 Cr | L1 | Accepted-AOC LOWEST |
| 2 | L2₹2.0 Cr+₹13.7 L (7.32%)Rejected-Finance | ₹2.0 Cr+₹13.7 L (7.32%) | L2 | Rejected-Finance OTHER THAN LOWEST |
| 3 | L3₹2.5 Cr+₹63.9 L (34.1%)Rejected-Finance 0 00 NEAR KRISHNA PETROL PUMP GEEDAM ROAD JAGDALPUR BASTAR CHHATTISGARH 494001 | BASTAR | CHHATTISGARH | 494001 | ₹2.5 Cr+₹63.9 L (34.1%) | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹1.6 Cr
EMD Value
₹2.3 L
Closing Date
1 Apr 2024, 6:00 pmClosed
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
CONSTRUCTION OF 04 NOS OF TYPE IV QUARTERS (DOUBLE STOREY) FOR IDAS OFFICERS AT PCDA (P) UNDER GE (WEST) PRAYAGRAJ.
2023_MES_588651_7
81743/W/E8
Open Tender
Civil Works
Lump-sum
270 days
Prayagraj
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (West) Prayagraj
₹2.3 L
Yes
31 Aug 2024
26 Feb 2024
8 Apr 2024
27 Feb 2024
1 Apr 2024
18 Mar 2024
Amount
Sch 'A' Part-I (Building Work)
Construction of Type IV (D/S) Accn for IDAS Officers with servant Qtr & Garage with permenent specification, RCC framed construction, ATT Mosquito proofing. Sesmic measures etc complete all as specified and directed.
Construction of garrage complete all as shown in drg and as specified.
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Sch 'A' Part II (INTERNAL WATER SUPPLY)
Lump sum price worked out by the contractor for Internal Electrification as listed in Sch 'A' Part III (Internal Electrification)
Lump sum price worked out by the contractor for External Electrification as listed in Sch 'A' Part IV (External Electrification)
Lump sum price worked out by the contractor for Area Drainage as listed in Sch 'A' Part V ( Area Drainage)
Lump sum price worked out by the contractor for Sewage Disposal as listed in Sch 'A' Part VI (Sewage Disposal )
Lump sum price worked out by the contractor for Road ,Path & culvert as listed in Sch 'A' Part VII (Road,Path & culvert)
Lump sum price worked out by the contractor for External Water Supply as listed in Sch 'A' Part VIII (External Water Supply)
Lump sum price worked out by the contractor for Fencing as listed in Sch 'A' Part IX
Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORK as listed in Sch 'A' Part X (SITE CLEARANCE AND EARTH WORK)
Lump sum price worked out by the contractor for DEMOLITION OF BUILDING as listed in Sch 'A' Part XI (SITE CLEARANCE AND EARTH WORK)
Sch 'A' Part-XII (Misc Items for E/M and B&R Works) NOTE: This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs. 0.00" under col E signifies this fact only.
S&F of Decorative wall mounting twin leaf design LED 5W fixture with elegant diffuser ,fixed in repair complete in specified and as directed.Make : Havells Cat No LHFHCHE1TL1W020/SYSKS/Bajal/philips/Crompyon Greaves.
S&F RJ11 Telephone jack, modular type, single, with shutter, with pressed steel sunken box with top cover & base frame complete. Make : Anchor Roma Cat No. 20857 or equivalent model of Precision/CG/ Legrand
S&F TV Socket outlet, modular type, single, with pressed steel sunken box with top cover & base frame complete. Make : Anchor Roma Cat No. 21157 or equivalent model of Precision/CG/ Legrand
S & F Ekinox³ TPN DB-VTPN DB 4 way DPX³ 160A MCCB Double door DB's As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's,With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing [IP 4 -IK 09 with metal door Make:Legrand /ABB/Havells (for Qtr DB)
S & F Ekinox³ TPN DB-VTPN DB 6 way DPX³ 160A MCCB Double door DB's As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's,With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing [IP 4 -IK 09 with metal door Make:L&T Cat no DBPSG004SD/Legrand /ABB/Havells (for main DB)
S&F street light braket made out 32 mm die bore GI pipe, light grade of length not less than 1:2 Mtr, bend to required shape with clamps, nuts& bolts for supporting the brackets all as specified and directed.
M&L for shifting/ installing split type Air conditioner of any capacity complete with piping and copper tubing arrangements including fixing the suction unit on wall and making good as existing as well as making electric connections all as directed by Engr-in-Charge. (Note :- Copper tubing drain pipe and other insulation material measurd under relevant item)
S&F Copper pipe 16 mm dia with insulation for split AC all as specified and directed.
S&F Copper pipe 12 mm dia with insulation for split AC all as specified and directed.
Supply and fix three phase energy meter , 3 PH 4-WIRE ,RATING 10-60 AMP 240V ,EM301B Make ;L&T CAT NO :WR30IBC3C00all as specified.
M&L for boring under road for laying U/G cable for size 100mm bore of GI pipe complete.
Supply, installation, testing and commissioning of factory made, CPRI type tested, floor standing indoor cubical compartmental type MAIN LT PANEL of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed by engineer-in-charge.
Make: L & T, Schneider, Siemens, ABB
The Main LT Panel shall comprise of the following:
Aluminium bus bar _500 Amps rating -3 Nos for phases and 200 Amps rating -01 No
MCCB 4 pole 250 Amps, 36 KA 415 volt,adjustible type -01 Nos (In coming)
On load changeover switch 4 pole 250 Amps, 415 volt -01 Nos
MCCB 4 pole 160 Amp, 415 volt 25 KA -01 Nos (Outgoings)
MCCB 4pole 63 Amps volts 25 KA -01 Nos
Steel light timer switch comprising of 63 Amp MCB TPN, contactor 40Amp and analog time switch -01 set
indicator lamp (RYB) type -01 set of three
M&L for point wiring (concealed type) complete with FRLS PVC insulated, unsheathed stranded conductor of nominal area 1.5 sqmm (22/0.30 or 30/0.25) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/ chasing on brick wall not exc, 10 cm girth (excluding ceiling surface) and supply and fixing PVC conduit pipe medium grade of norminal size 20mm dia along with connected fittings/junction boxes using new MS sunk terminal boxes of thickness not less 1.5 mm new 3 mm thick laminated sheet cover with cement mortar ratio of 1:3 and treated surface with existing white/colour wash/ distemper etc to match existing surface complete all as specified and directed and suitable for the following:-
(a)One light point controlled by one, one way switch
(b) One 3 pin 5 amp socket out point on the same board with other switches.
(c) One3 pin 5 amps socket out let point on independent board but below the switch board
(d) one bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5sqmm size.
(e) one light point controlled by two 2-way switches
All as per items No14.24 here in before but point wiring one socket outlet 16 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire. ( power point 16 Amps sockets)
S &F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,5 Watt ,1 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc all as specified and as directed. [Make: HAVELLS /Crompton/wipro or equivalent]
M&L rigid non metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc for external dia 25 mm .
M&L For Submain wiring with 2x 4.0 sq mm size along with earth wire of size 1x 4.0 sq mm of FRLSH PVC insulated copper conductor, single core cable multistrands in and including 20mm PVC conduit of suitable size in all as reqd at site/directed. (For AC)
Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable 4 Single core of size 10Sqmm, earth continuity conductor of size 4x10 Sqmm to be drawn through in and including 40mm PVC conduit concealed in walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)four wires of 10 sqmm and two wire of 10 sqmm and 1 run of PVC conduit shall be measured as one unit.( For Main TPN DB To Qtr DB))
S&F Energy efficient BEE five star rated ceiling fan, 1200 mm sweep and connecting up including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete in all respect all as specified and directed.Make : HAVELLS / Crompton Greaves/ Bajaj/Orient
S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan with louver of suitable size including testing on completion.
S&F in replacement of worn out control swithc with MCCB Triple pole, Type- DU 100H having thermal release rangr 160 Amps, Breaking capacity-30 KA at 415 VAC, 50 Hz conforming to IS 13947 (p-2) with extended/spreader terminala (set of six) including making electrical cable connections with providing proper size of aluminium lugs with due care complete all as specified and directed. (for main DB incomming)
M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. all as specified and directed by engineer- in - charge.
S&F in cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses of temperature resistance body of size 90x110x17mm fixed on road with bituminous adhesive as per manufactures instruction having resitance creamer coating and reflective surface complete all as specified and directed.
M&L for cleaning the road surface of old dirt, oil/grease spots and foreign material etc and applying 2.5 mm thick road marking strips(retro reflective) of white/yellow colour using Hot Thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profiles shoe, glass beads dispenser, propane tank heater and profile shoe heater driven by experienced operator complete all as specified and directed
S&F for two way bib cock of 15 mm dia with wall flange complete all as specified and directed.
S&F in jet nozzle of 15 mm dia for EWC complete with all fittings complete all as specified and directed.
S&F angular stop cock of 15 mm dia with wall flange complete all as specified and directed.
M/s Highway Construction
POOJA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .