SPECIAL REPAIR TO BUILDING NO T-41 AND T-14 OF FD REGT AT SASOMA UNDER GE 873 EWS

Amount

Dismantling of tiles of any description or thickness in floors complete all as specified and as directed.

M&L 40mm thick plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate) as in floor complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick in Cement Mortar 1:6 for laying floor finishes.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets complete all as specified and as directed.

M&L 9 mm thick prelaminated partical board, interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in wall panelling complete all as specified and as directed.

M&L 9 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with nails as in ceiling works complete all as specified and as directed.

Dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section complete all as specified and as directed.

M&L second class softwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm complete all as specified and as directed.

M&L second class softwood plain fillets, rectangular in section, clean swan, secured with nails exc 3 and n.exc 6 Sqcm complete all as specified and as directed.

Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F Galvanised MS sheeting of 0.63mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hooks two framed work with PVC and steel washers as in roof & wall with Zinc coating of 275 complete all as specified and as directed.

S&F plain, galvanised MS sheeting of 0.63mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide complete all as specified and as directed

M&L for preparation of old painted Steel/wooden surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint.

Takingdown chowkats or frames with shutters (without taking offf shutters from the frames) not exc. 1.5 sqm each. (Steel/Wooden)

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each.(Steel/Wooden)

S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

S&F Glazed and skeleton shutters of 30mm thick 2nd class hardwood ,open rebated and prepared to receive glass,gauze etc.(without sash bars),edges of framing plain chamfered or rounded.fitted with cut and mitred beads for securing etc if windows,ventilators etc complete all as specified and as directed.

M&L for painting to wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc complete all as specified and as directed.

S & F 3.00mm sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m in each pane complete all as specified and as directed.

S & F butt hinges 100mm mild steel cold rolled, medium weight complete all as specified and as directed.

S & F butt hinges 75mm mild steel cold rolled, medium weight complete all as specified and as directed.

Supply & fix MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed.

Supply & fix MS barrel tower bolt 150mm long stove enamelled black, complete all as specified.

Supply & fix MS barrel tower bolt 100mm long stove enamelled black, complete all as specified.

S & F of Extruded aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed.

S & F of Extruded aluminium alloy handles fabricated type anodised 125 mm size complete all as specified and directed.

S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed.

S & F Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 75mm thick using 20 mm graded stone aggregate as in plinth protection and Finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M & L Framed brecket of angals or tee with web and flanges cut to shape, drilled and countersunk for screw,including bending and wending angles as necessary gusset plates, riveting, etc n exc 10 kg each brackets conforming to Fe-290 Gde-E-165 Brackets over 10 kg each to be measured under Structural Steel) complete all as specified and directed.

M & Lfor Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. completed using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore heavy duty type suitable for wash hand basins/sinks complete all as specified & directed.

S&F 15mm bore bib taps cast copper alloy, fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete and fixed in repairs all as specified.

S&F in repair 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified.

3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia incl taking up or down steel tubing and connections,including cleaning for refixing or removal to store all as specified and directed.

3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm dia incl taking up or down steel tubing and connections,including cleaning for refixing or removal to store all as specified and directed.

Dismantling of water tanks 1000 litres capacity of any description and removing to store complete all as specified and directed.

Supply and Installed puff water tank capacity 1000 Ltrs insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature (-) 30 degree to (+) 35 degree celcius fixed in position with all fittings over PCC plate from complete all as specified and directed.

Dismantling of water tanks500 litres capacity of any description and removing to store complete all as specified and directed.

S & F puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform complete all as specified and directed.

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floor of 75mm bore complete all as specified and directed.

S & F in repairs PVC bend any radius size 75mm bore with access door complete all as specified.

S & F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

Removing of excavated material/ debris n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed by Engr-in-charge

M&L for Sand filling under floors or in foundations complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

(a) One light/fan point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed.

S&F socket outlet 2–in–1, 3pin, 6A (multipurpose) suitable for 3 pin/5 pin plug flush type complete all as specified and directed by the Engineer–in–Charge

S&F switch socket combination 3 pin, 5 Amps, 2–in1, flush type (multipurpose) 2 pin /3 pin plug complete all as specified and directed by the Engineer–in–Charge.

S&F switch socket combination 2–in–1, 3 pin, 5/15 Amps, flush type (multipurpose) complete all as specified and directed by the Engineer–in–Charge

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by the Engineer–in–Charge.

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make- Havells/Wipro/CG/Philips or equivalent

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer–in–Charge. Make-Havells/Crompton/Philips

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, triple Pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of triple poles and current carrying capacity 40 to 100 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make- Havells/Wipro/CG/Philips or equivalent

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer complete all as Specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. Make- Havells, Ventiair Dxor or equivalent) all as specified and directed.

Taking down of MCB DB/TPN 4/8/12 way including MCB SP/SPN and making good of wall complete all as specified and directed by the Engineer–in–Charge.

Taking down carefully damaged copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by the Engineer–in–Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L point wiring for power point with 4.0 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Make: Havells/Polycab/Grandlay

Supply, laying,fixing, passing through pipe or laid in tranches and testing underground XLPE Insulated heavy duty electric cable with aluminium conductor 1100 Volts grade cross section area 35 Sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Grandlay

S&F 5 star rated Energy Efficient Electric Geyser Vertical Type Coppper 25 Liters Storage capacity with Thermostat, Pressure release and all other safety features as per BIS and duly provided with Inlet Outlet chrome plated steel connections, brass stop cocks, grouting with cement on the wall and provided with 4.0 Sqmm copper wiring and 15 Amp switch socket incl connection to earth. Make: Havells/Philips/Bajaj

Deduct Schedule of Credit of Rs (-) 1,08,218- (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S MOHD KARIM (BID ID -3406097)

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3406248)