Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹19.0 L+₹54,039.80 (2.93%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L2 | Rejected-Finance BEING NOT L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
PROVISION OF SEPTIC TANK AND SOAK PIT ALONGWITH ALLIED WORKS AT VARIOUS LOCATIONS AT AF STATION DEOLALI
2022_MES_542770_1
8900/E8
Open Tender
Civil Works
Item Rate
180 days
DEOLALI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹48,000
Yes
11 Oct 2022
2 Aug 2022
31 Aug 2022
3 Aug 2022
29 Aug 2022
16 Aug 2022
Amount
Excavation over areas in any type of soil, n exc 1.5 m deep and getting out in hard and dense soil
As per sl.item no. 1 but exc 1.50 m deep but n exc 3 m deep and getting out in hard and dense soil
M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete.
M & L for Hardcore of gauge 100 mm thick using broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M & L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete.
M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4
M & L for Brickwork with fly ash bricks in one brick thick honeycomb walling, built in Cm 1:4
M & L for Loose filling with brick bats broken of gauge 40 to 80 mm soakage pits, soakage wells
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M & L for Formwork to edges of concrete Slabs exc 5 cm but n exc 10 cm wide for fair finished surfaces
M & L for reinforcement of TMT bars 6 mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M & L for reinforcement of TMT bars 10 mm dia and above , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M & L for RCC M-25 grade as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M & L for rendering 15 mm thick in CM 1:3 Screed bed or bedding layer for laying floor finishes
M & L for rendering 15 mm in CM 1:3 on wall incl finished even & Smooth using WPC
Supply only intregral water proofing compound
M & L for formwork to beams for fair finished surfaces (baffle wall)
M & L for RCC M-25 grade as in beams (baffle wall)
M & L for rendering 20 mm thick in CM 1:4 as bearing plaster
S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
M & L for providing cement concrete 1 : 2 :4 type B1, using 20 mm graded stone aggregate as in bed block and copings, and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed.
S & F of Man hole cover 450 mm x 450 mm (exc 5Kg) Cast iron work grade FG 150
S & F of PVC (SWR) vent Cowel 110 mm
Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil
Removing excavated material exc. 250 m but n exc. 500 m and depositing where as directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & as directed by Engr-in-Charge.
M&L for Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick bedding layer/ backing coat in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors (below or above ground level) not exceeding 15cm thickness all as directed by Engr-in-Charge.
Dismantling of stone slab and tiles of any description or thickness in floors aprons etc laid, bedded & pointed in any mortor complete all as specified & directed.
M & L for PCC 1:4:8 75mm thick, type D2 (using 40mm graded broken stone agg) as in sub base all as specified & directed by Engr-in-Charge.
M & L machine cut Cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for granite (black) of any type work (table rubbed and polished) of 16 to 18 mm thick in steps, jambs, pillars, window cill, cooking platform and like including 15mm thick screed bed/backing coat in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and moulding the edges complete all as directed by Engr-in-Charge
M & L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer or mortar mortar 15mm thick for laying floor finishes in CM 1:6
M&L for chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick, laid in floors/paving set and jointed in neat cement slurry with gray cement and pigment, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specified & as directed by Engr-in-Charge.
S & F in repairs vitreous china wash down water closet (Pedestal pattern) white (EWC) including white PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, complete all as specified and directed by Engr-in-Charge.
S&F in repairs vitreous china water closet (squatting pan) Orrisa pattern of size 580 x 440mm white with intergral footrests & 'P' trap/ (excluding flushing cistern and flush pipe) including connection to trap, to flushing pipe etc. complete including PCC for making good to floor etc. complete all as directed by Engr-in-Charge.
S & F in repairs low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting etc all as directed by Engr-in-Charge.
S&F PVC connection 15mm bore dia.of pipe with PTMT nuts and PVC washers of length 600 mm all as directed by Engr-in-Charge.
S&F in repairs low density polythelene pipes 40mm bore fixed complete to walls, ceiling or in floor all as directed by Engr-in-Charge
S&F in repairs Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 50 gms) all as directed by Engr-in-Charge.
Taking up or down GI tubing 15mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed by Engr-in-Charge
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floor with suitable clamps & nuts etc all as directed by Engr-in-Charge
S&F in repairs bib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as directed by Engr-in-Charge
S&F in repairs stop cocks 15mm bore, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions with long shank and cup washers all as directed by Engr-in-Charge
S&F in repairs tubular towel rail brass chromium plated,20mm dia, D type,60cm long between flanges ISI marked complete all as specified.
S & F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32 mm size with long screwed shanks and fly nuts and including PVC discharge pipe complete all as specified and directed by Engr-in-Charge.
S & F in repairs 15 mm bore dia. of pipe fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
Excavating in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil.
All as per serial item No.49 above but in hard/dense soil.
All as per serial item No.49 above but depth exc. 1.5m and n.exc. 3.0m as in hard/dense soil.
M & L for cement concrete 1 : 4 : 8 type D-2 using 40mm graded stone aggregate, as in bed to drain pipes for bore of pipe 150 mm dia. including packing under, and haunching against the sides of pipes after they are laid and tested all as specified and directed.
M & L for reinforced cement concrete pipes class NP-2 laid in jointed complete with collers ,bore of pipe 150 mm complete all as specified and directed.
M & L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified
M & L for providing cement concrete 1 : 2 : 4 type B-1, using 20mm graded stone aggregate as in channeling, benching & copings, and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound @ 3% by weight of cement finished even & fair without using extra cement all as directed. (Note:- WPC shall be measured and paid separately under relevant items of this schedule)
M & L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & fair without using extra cement all as directed .
M & L for providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) and similar small articles with plain fair surfaces, and set in cement mortar 1:4.Completed all as specified and directed.
Vinod Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .