Special repairs to the Construction wing and Providing cabin arrangements to the Executive Engineer and Divisional Accountant in TNCSC Regional office campus at Gopalapuram in Chennai City

Amount

CIVIL WORK

Dismantling and Clearing away and carefully stacking materials for re – use Brick / Stone masonry in cement mortar under 3 Meter height etc., complete complying with standard specification and as directed by the departmental officer

BRICK WORK work in country bricks of size 8x 3/4" x 4-1/4” x 2-3/4” in cement mortor 1:5 (one cement and five crushed stone) including curing, neat finishing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officer.

Paving the flooring with vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting old wood works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed.

Fabricating supplying and fixing in position of Aluminium anodized natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frame 63.50x38x3mm @ 1.72 kg/m centre mullions : 63.50x38x3mm @ 1.55 kg/mg/m for intermediate vertical mullion 90cm c/c Hozizontal mullion at 1.00 m 2.10 m covered with 5.5m thick plain glass with necessary aluminium clips of size 17.27x17.15x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column masonry wherever in necessary with power drills to the extent etc., complete complying with standard specification and as directed.

Fabricating supplying and fixing in position of Aluminium anodized natural colour matt finish of single leaf door with half paneled with 12mm thick both side laminated particle bord at bottom and half glazed using 5.50mm thick plain glass at top. The outer frame shall bewith aluminium box section 101.60x44.45x3.18m at 2.319kg/m and shutter frame made of section vertical & top rail : 50x44.45x2.50mm @ 1.292 kg/m, bottom rail : 100x44.45x2.50mm @ 1.974 kg/m, lock rail:50x44.45x2.5mm @ 1.292 kg/m, Alu. Clips : 17.15x17.27x1.50mm @ 0.176 kg/m, Alu Handle : 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading PVC felt handle for a lengtjh of shutter (both side) locking arrangements, furniture, fittings such as aluminium tower bolts – 250 x 12mm – 1 No. aluminium tower bolts 200 x 12mm – 1 No. Aluminium Hydraulic door closer – 1 No. lock – 1 No. Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing etc., complete complying with standard specification and as directed.

M SELVAM (BID ID -1239559)