REPAIRS TO MISC BR ITEMS TO FALSE CEILING PLUMBING CHAJJAS JOINERY SANITARY FITTINGS FLOORING FOR CERTAIN UNITS UNDER AGE BR II OF GE CENTRAL BANGALORE

Amount

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards / slabs /blankets,any thickness including cover fillets complete all as specified and directed.

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition of Cement Concrete n.exc. 15cm thick but above ground level (Any type of flooring)and and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition of Cement Concrete exc 15cm thick but above ground level (Any type of flooring)and and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition of brick work or stone boulder masonry,built in cement mortar including all quoins,arches,pillars,etc,complete all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out of the MD Land all as directed by Engineer-in-Charge.

Demolition and breaking up drain pipes of 100/75 mm dia(salt glazed ware,AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as specified and directed.

Dismantling structural steel work including doors,gates,grills but excluding framed truss etc…. Complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 Sqm (with out taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 sqm (with out taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down & refixing in shutters in same openinmg of any description exc 1 sq. m and n exc 2 sq. m each including adjusting and ezeing complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling including hangers complete allas specified and directed.

M&L for 6 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws

M&L in repair for 12 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws

M&L for 25 mm thick cement concrete type B0 1:2:4 used for levelling course for flooring complete all as specified and directed.

M&L for dark shade/Double charged virified ceramic tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including screed bed of cement mortar 1:4 15 mm thick complete all as specified and directed.

M&L joint free Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 15mm thick screed bed in CM (1:4).

M&L Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:3.

M&L for 40 mm Cement Concrete type B1 1:2:4 is used for flooring (20 mm graded aggregate) fininshing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling ,sunken repairing and mass concrete complete all as specified and direceted.

M&L for bitumen blown any grade,applied hot,two coats,to concrete surfaces at the rate of 1.5 Kg per Sqm per coat complete all as specified and directed.

M&L for cement concrete Type B0 1:2:4 (12.5 mm graded stone aggregate) in roofs,kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified and directed.

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as specified and directed.

M&L Rendering 5mm thick in CM 1:3 finished even & smooth without using extra cement in ceiling

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of cement base paint over one coat of primer all as specified and directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of oil bound distember over 1 to 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of Newly Plastered surfaces of ceiling and applying Three coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for 75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring jointsfixed to walls using MS holder bat complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring joints,laid in trenches or in floors complete using MS holder bat all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed type 'B' in any length with rubber ring jointsfixed to walls using MS holdere bat.complete all as specified and directed.

S&F PVC (SWR) bends 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(single T) 75 mm with access door complete all as specified and directed.

S&F PVC (SWR) 75 mm branch piece,single (Single Y) equal or unequal with access door complete all as specified and directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. including 10 liter capacity low level PVC Flushing cistern,15 mm size PVC connection 450 long mm and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type) 465x355x265 mm white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating,32 mm waste coupling and Union for discharge pipe. (Exclusive of fixingand supply pipe to flushing cistern, trap and waste pipe)

S&F in repair 32 mm low density polyethylene (LDPE)corrugated pipes of pressure rating 6 Kgf/Sq.cm with connecting bracket for wash basins and urinals complete all as specified and directed.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.

S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) and providing 15 mm size PVC connection 450 mm long & waste pipeg complete all as specified & directed by Engineer-in-charge.

S&F in Repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets, Flushing pipe all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm bore PVC Connections 450 mm long with PTMT nuts complete all as specified and directed.

S&F in repair 15 mm bore bib taps cast copper alloy with crutch or butterfly handle,screwed down fancy type complete all as specified and directed

S&F in repair 15 mm bore stop valves cromium plated cast copper alloy with crutch or butterfly handle,screwed down fancy type complete all as specified and directed

S&F in repair 15 mm bore stop valves cast copper alloy with crutch or butterfly handle,screwed down fancy type with long shank and cup complete all as specified and directed

S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15 mm-90 gms) complete all as specified and directed.

S&F in repair 15 mm bore push taps any colour high pressure of PTMT screwed for iron pipe and fixed (Minimum weight 15 mm-47 gms)

S&F in repair 15 mm bore stop valves of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15 mm-90 gms) complete all as specified and directed

S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms)

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) & Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms

S&F in repair soap dish,any type,fixed to plugs with chromium plated with brass screws complete all as specified and directed.

S&F in repair metalic coated curtain bracket 25 mm dia including wooden support complete all as specified and directed.

S&F in repair 25 mm dia metalic coated curtain rod complete all as specified and directed

M&L Second class Hard Wood Plain, Solid, Straight chowkats and frames, framed, rebated on the solid, put together with glue , pinned at joints.

S&F Second class hardwood 35 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a)

S&F Second class hardwood 30 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b)

S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side including liping beading all round as in Door Shutter,Cup board shutter & Kitchen rack all as specified in SSR Part I, Section 8, clause 8.25(c)

S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed.

S&F 4mm thick Sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 SqM in each pane

S&F 4mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,locks handles etc. complete all as specified

S&F miled sgteel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preperation of new steel surfaces and applayingtwo coat of synthetic enamel paint over a coat of red oxide,zinc chrome primer all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm Butt hinges , medium weight, cold rolled, mild steel complete all as specified and directed.

M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

M&L Plain Cement Concrete 1:3:6, type C1, using 20mm graded stone aggregate as in hold fast blocks complete all as specified and directed.

S&F Mild steel small articles conforming to Fe-290-0 grade-E-165. such as in hold fasts

Supply only integral water proof compound complete all as directed and specified

Vinayaka Enterprises

Srisrinivasaenterprises