SPECIAL REPAIR BLDG. NO. TS-445, 447, BATHROOM TOILET, GUARD ROOM AT T HALL, PROVN OF 02 X TOILET WITH ATT WASHROOM JCOS LVING AND OFFICE, IRON GRILLS AND WIRE MESH FOR SECURITY, GUARD POST OF AND CERTAIN REV AND MINOR WORKS UNDER GE NAGROTA.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in any type of soil, complete all as specified and directed.

M&L for Hardcore of guage not exceeding 63mm, broken stone/boulders deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a ture surface broken stone/boulder complete all as specified and directed

M & L 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishes, complete all as specified and directed.

Forming contraction (Dummy) joints 65 mm deep x 10 mm wide filled with sealing compound of grade 'A' complete all as specified and directed

Add to or deduct from item No. 4 for every 5 mm depth of joints over or under. Notes: 1. All items are material and labours or supply and fix unless specially stated. 2. All rubbish/demolished material to be removed out of MoD land.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete in any type of soil,complete all as specified and directed by Engineer-in-Charge.

Removing surplus soil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items, complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type B-1 (using 40 mm graded crushed stone aggregate) as in floor , complete all as spd and directed

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor finished concrete surface even and smooth, complete all as spd and directed

M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection & sub base of floor finishes, complete all as specified and as directed.

M & L for rendering 15 mm thick on other faces of fair faces of brick work, stone masonry or concrete surfaces in CM 1:4 on wall surface finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L Framed work as in door or gate of angles or other section's with gusset plate, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering complete conforming to Fe-410 incl one shop coat of red oxide primer complete all as specified and directed

M&L pintle hinges, hold fast and clampsand similar small articles etc confirm to Ge-290 Gde E 165 including necessary PCC 1:2:4 type B-1 using 20 mm graded aggregate for embedding complete all as specified and directed.

M&L mild steel plain black sheet 1.6 mm thick in hearth covering to steel gates and similar work, cut to size , holes punched, including round headed screws, clout nails or rivets and ficed to steel framing with plain 40 mm lap joints with riveted or welded seams, inclidng bending or turning up, mitred angle as required complete all as speicified and directed

Preparing of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Preparing of previously painted/new steel surface of any description, and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer in charge.

M&L sand for 50 mm thick filling under interlocking paver block incluidng watering and consolidation complete all as specified and directed

M&L machine pressed precast concrete interlocking pver(with grey cement and pigment) any shape and size confirming to IS-15658-2006 of 80 mm thick M-40 grade complete all specified and directed

75 mm thick plain cement concrete 1:4:8 type D-2 ( using 40 mm graded crushed stone aggregate ) as in sub base etc complete, all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in padding in two layers, 25mm thick each layer complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

M & L for PCC 1:3:6 type D-2 (using 40 mm graded crushed stone aggregate) as foundation filling and mass concreate, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based semi corrugated/profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based plain stee steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground levels), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using WPC(WPC to be paid measured and seperately) even and rough for fixing tiles, complete all as specified and directed.

Preparing of newly plastered surfaces of walls and applying two coats of oil bound distemper over a primer on plastered surfaces complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough, complete all as specified and directed.

M & L for 450 x 300 mm thick glazed ceramic coloured tiles as on walls/vertical surface over 10 mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or walll tiling including cement mortar bedding (but not backing) removing serviceable tile to store and rubbish off the premisis complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and directed

M&L 15 mm thick Screed bed or bedding layer in CM 1:4, as in floor finishes all as specified.

S&F rolled mild steel section as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates/welding etc complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

Preparing of new steel surface of any description, and applying two coat of synthetic enamel paint over a coat red oxide primer not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer in charge.

M & L for rendering 15 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landing and similar work not exc 200 mm thick fair finished surfaces of concrete complete all as specified and directed

Use and waste formwork to edges of concrete flats , reads breaks in floors, window cills, roof etc n.exc 20 cm wide and sides RCC/PCC bands in wall, horizental or slooping and similar work exc 10 cm but n.exc 2 cm wide fair finished surfaces of concrete all as specified and directed

M & L for rendering 15 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:6 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly surface , undecorated surface and apply two coat of emulsion on walll completed all as specified and directed

Preparing newly/undecorated surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparing of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over one coat of white wash complete all as specified and directed.

S&F anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

Anodised aluminium door shutter aluminium section weighing 0.55 Kg/m incl necessary joining cleat, glazing clip,ruber neoprene packing handle 2NO in each door hing anodised aluminum snap beading screws etc completed all as specified.

M&L for 30 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) finsihed the suface even and fair without using extra cement complete alll as specified and directed

M & L for Glazed ceramic coloured printed tiles (first quality) of size 300 mm x 200 mm x 7 mm thick as in vertical surface, dado/skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 300 x 300 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over

M & L for rendering 10 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F steel tubing 15 mm dia (medium grade) with all fitting and fixed to complete to walls and ceilings or laid in floors/roofs complete with all fittings ( such as bend, elbow, tee, short pieces, connecoter, back nuts, union etc) complete all as specified and directed.

All as per ser item No. 55 here in above but 20 mm dia

S & F 500 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy with capston head, screwed down , screwed for iron pipe or for brass ferrule and fixed and repair complete all as specified and directed.

S&F 15 mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bore ball brass valve fancy.high pressure with polythene float and flynut complete scewed for iron pipe or brass ferrule complete all as specified.

S&F PVC connecting 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed.

M&L 75 mm dia outlet type B-1 (1:2:4) CI floor trap with PVC grating including jointing to waste pipe in cement, fixed in cement concrete, complete all specified and directed

S & F 32 mm PVC waste pipe for wash hand basin/urinal, complete all as specified and directed.

S&F for 125/110 mm PVC (SWR) gully trap setting and jointing with slovent cement complete all as specified and directed

Vitreous china wash basin, white, flat back, size 580 X 450 mm including waste pipe all fitting and fixture complete all as specified and directed

M&L 150mm dia RCC pipes exc in ordinary soil at average depth of 3 m incldinve of manholes RCC precast manholes cover having 6 mm MS plate emedded all around/fibre reinforced cover with angle iron frame pipes laid on moorum bedding but pipes laid on PCC bed, including packing under and haunching against sides complete all as specified and directed.

S&F vitreous china bowl urinal flat back size 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 15 mm piller taps cast coper alloy with capstan heads fancy type chromium plated screwd down high pressure screwed for iron pipe complete all as specified and directed.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing and apply two coat of synthetic enamel paint on steel surfaces over a coat of red oxide .Steel window shall be conforming to relevant IS, complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed.

Taking down shutters of any description exc 01 Sqm and not exc 02 Sqm and refixing in same opeining complete all as specified and directed

Roughining surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed

Brushing neat cemtn slurry with 3.0 Kg of cement per sqm complete all as specified and directed

Cutting holes in brick walls exc half brick but not exc one brick in CM for inserting holdfasts and making good dismantled portion in cement mortar 1: 3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed by Engr-in-Charge.

Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F 4 mm dia galvanised steel wire of mesh size 75 x 75 mm made up into matteress or cages , lapped wired and laid in position including closing after filling including fixing to steel post by welding etc complete all as specified and directed

M&L for bands, straps, supports or stays for rainwater, vetilation pipes, including bolts, if required, hooks (Stay),heavy for large gate, hook and pintle hinges, large hasps and staples, chains , hand made sliding bolts, clamps,. Hold fasts, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafter, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed

Preparing newly surfaces and applying three coats of white wash on wall complete all as specified and directed.

RCC 1:1.5:3 ( Normal mix) as in slab supported on walls/beam, & column in floors, roofs (using 20mm graded crushed stone aggregate) complete all as specified and directed

RCC 1:1.5:3 ( Normal mix) as in beams, roof beams, cantilevers, lintel over 1.5 m span, bands, chajjas etc (using 20mm graded crushed stone aggregate) complete all as specified

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips qfuality conforing to Gd I, IS 432(part I) or Fe-410 S or Fe- 410-o complete all as specified.

All as per ser item No. 82 here in above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and venders

Use and waste formwork to sides of concrete foundations footing base of column, plinth beams, raft and raft beams, sides and soffits of foundation complete all as specified.

M&L brick work with sub class 'B' bricks in 1:4 cement mortar on straight or curved on plan to any radius in half brick thick wall, complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforcement with square tube complete all as specified and directed

M&L factory made solid panel PVC door shutters 30 mm thick (style) consistiong of frame made out of MS tube of top and bottom rails,. MS frame shall be covered with heat moulded plain coloured PVC channel having a PVC sheet stip of 20 mm width struck inside with solvent cement & stles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides & as insets for tip rail and bottom rail , paneled of plain colour PVC sheet to be fitted in the MS frame welded/sealed to be stiles and rail with suitable PVC sheet beading and jointed together complete all as specified and directed

Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares in any size in each pane complete all as specified and directed.

S &F 100 mm long butt hinges,medium weight,cold rolled mild steel, complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) 300 mm long, fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete, all as specified .

S&F aluminium handle of size 150mm complete all as specified and directed

Earth filling under floors, spreading, levelling in layers n. exc 25 cm thick each incl watering and well ramming as complete all specified and directed

M&L 20 mm thick Screed bed or bedding layer in CM 1:4, as in floor finishes all as specified.

M & L for rendering 10 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles (first quality) of size 450 mm x 350 mm x 7 mm thick as in vertical surface, dado/skirting, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement (including necessary joint filling with mixture of paving bitumen and sand in 1:3), complete all as specified and as directed.

M&L for structural steel for staging of (OHT) framed angle 50 x 50 x 6 mm and FI 50 x 6 mm bracing including distance pieces, cleats etc Gde Fe-410-s complete all as specified and directed

S & F 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F 20 mm bore stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore ball brass valve high pressure with polythene float and flynut complete scewed for iron pipe or brass ferrule and fixed in repair complete all as specified.

S&F 15 mm bore angle valve fancy type , cromimum plated with long shank(concealed type) cast copper alloy screwed down high pressure a handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

Sheet glass shelf assembly consistiong of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

M&L 75 mm cast iron floor trap in cement concrete 1:2:4 type B-1 with grating including jointing to waste pipe fixed complete all as specified and directed

S&F 110 mm dia cast iron soil based and vent pipe an any length with or without ears with cement joint laid in trenches or in floors complete all as specified and directed

S&F 75 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint fixed to wall complete all as specified and directed

S & F 110 mm dia cast iron soil based and vent pipe on any length with or without ears with cement joint fixed to wall complete all as specified and directed.

S&F 75 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint laid in trenches or in floors complete all as specified and directed

S&F 110 mm bore cast iron bends(any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed

S&F 75 mm bore cast iron bends(any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed

S&F 110 mm bore with oval access door cast iron branch pieces single (equal or unequal) ordinary or inverted or with parallel branches complete all as specified and directed

S&F 75 mm bore with oval access door cast iron branch pieces single (equal or unequal) ordinary or inverted or with parallel branches complete all as specified and directed

S&F 75 mm cast iron vent cowl complete all as specified and directed.

S&F 110 mm cast iron vent cowl complete all as specified and directed.

S&F 'S' trap of 75 mm bore and fixing properly to WC complete all as specified and directed

S&F Stack clamps out of 100 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends to wall or roof , complete all as specified

S & F 10 Ltrs capacity PVC valveles, less symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle 60 mm long flush pipe including brackets, complete all as specified and directed.

Vitreous china urinal, half stall type, flat back, size 635 x 395 x 420 mm, coloured, with grating and union for discharge pipe , waste coupling and waste pipe, comolete all as specified.

M & L for 62 cm wide Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking plateform of size not less than 2 m in length, incl cutting for sink over and including 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match, complete all as specified and directed.

Vitreous china wash hand basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug complete all as specified and directed.

S & F as in repair Vireous china squatting pan "Orissa" pattern size 580 x 440 mm white with integral foot rest all as fixed in repairs including 'P' or 'S' trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450 x 15 mm) flushing pipe complete fixed in repair all as specified by Engr-in-Charge.

Septic tanks exc in ordinary soil foundation in PCC 1:2:4 brick work in cm 1:4 RCC slab covers including RCC precast manhole cover having 6MM plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete for 50 users.

Soakage wells exc in ordinary soil foundation in PCC 1:3:6 wells of Honey combed and solid in M-25 concrete including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonery /filling with brick bats, complete of size 1.2 M dia x 4.5 M deep, complete all as specified and directed.

M&L cement concrete 1:4:8 tpe D-2 using 40 mm graded stone in bed to drain pipe laid in trenches including packing and haunching against the sides of pipe after they are laid and tested for 150 mm dia drain pipe complete all as specified and directed

M&L for 150 mm salt Glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed

S&F 125 mm shower rose brass chrominium plated complte all as specified and directed

S&F 20 mm dia type D aluminium anodised tubuler towel rail, 60 cm long between flanges complete all as specified and directed

Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering, complete all as specified and directed

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and removing from site (wood or steel), complete all as specified and as directed at site.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm n. exc. 4.00 sqm each and removing from site complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Floor door stopper of aluminium alloy body and tongue , anodised , with hard drawn steel spring , fixed in floor , over all length of cover plate 140 mm , fixed in repair all as specified.

S&F 12 mm dia aluminium anodised barrel tower bolts of extruded section with 125 mm long bolt complete, all as specified

300 mm mild steel oridinary rat tail rod pattern springs including roller and roller plates, complete all as specified and directed.

Hold fast/clamps of mild steel stay for rain water pipe etc confirm to Fe-290 Gde E-165 complete all as specified and directed

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) 250 mm long, fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed

S&F Box type Steel windows with double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing complete all specified and directed

S & F 35 mm thick second class hard wood factory made plain, framed, panelled shutters (two numbers of panels) with lock rail and panel of 9 mm BWP commercials ply or 12 mm veneered particle board on both faces. The size of rails and size as per IS:1003 (Part-I), Kiln seasoned & chemically pressure treated, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares n exc 0.5 sqm complete all as specified and directed.

S&F in repairs curtain rod 25 mm dia aluminum brass polished with ends bulb rings of required size including bracket complete all as specified and directed

Supply only integral water proofing compound.

M&L for providing 10 mm thick cement plaster in CM 1:4 on parapets over roof facias and finished even and smooth without using extra cement complete all as specified and directed

Prepration of wood or wooden based new or previously untreated surface of any description, over 10 cm width or gridth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper coat of coat of wall putty 2 to 3 mm thick, complete all as specified and directed.

Complete removal of existing treatment from wall and applying two coat of oil emulsion distemper over and incl a layer of wall care putty 2 mm to 3 mm thick complete all as specified and directed.

Complete removal of existing treatment applying two coats of cement base paint old wall surface complete all as specified and directed

M&L 18-20 mm thick machine cut kota stone flooring (Each stone not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding & polishing (mirror finish) over 15mm thick screed bed in CM 1:4 as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 kg/Sqm of surfaces all as specified and directed.

M&L 18-20mm thick machine cut kota stone slab in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) over 15mm thick rendering in CM 1:4 including taking out existing dado all as specified and directed.

M&L marble work 15 mm thick (550 mm kibg x 75 mm wide strip) as in border in flooring over 20 mm thick acreed in CM 1:4 including pointing in white cement 1:2 using marble dust with mixture of pigments to match with white marble including rubbing grinding and polishing complete all as specified directed.

Dismantling of wall & ceiling boards(fibre, pulp, insulation etc) or insulation boards/slabs/blankets including cover fillets if any, complete all as specified and directed.

GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. Finally 1200 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 6 mm thick aquesostic tile square edge of size 595x595 mm shall be placed into the grid size of 600x600mm.

M & L for rendering 05 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement, including two coat of white wash on ceiling complete all as specified and directed.

M&L for preparing old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for Non-skid ceramic coloured tiles 400 x 400 x 7 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over scred bed or bedding layer 15 mm thick of CM 1:4, complete all as specified and directed

Vitreous china wash down closet pan (Pedestal pattern) 580mm x 440mm white with white seat cover including PVC (SWR) 'P' trap 110 mm bore including PVC low level cistern of 10 ltr capacity invluding brackets jointing to flush pipe PVC connection (450 x 150 mm) PVC flushing pipe complete all as specified and directed by Engineer-in-charge

Dismantling 100mm dia cast iron/PVC pipes including fitting taking out of trenches or wall as required complete all as specified and directed

Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof suface and filling the cracks with silicon compound complete all as specifed and directed

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in padding at roof finished even and smooth without using extra cement complete all as specified and directed

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq m including cleaning surfaces complete all as specified and directed

APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 160 gsm/Sqm, non wove polister mat as centre core reinforced laid with 75mm side overlap and 100mm end overlap. The memberance has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP memberance complete all as specified and directed

Cement concrete tiles 25 cm x 25 cm x 20 mm thick, machine pressed, set jointed and pointed in neat cement slurry and roof over APP membrance laid over 15mm thick cement screed bed in cement mortar 1:6 all as specified and directed.

S & F 1000 Ltrs capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing tank and including PVC float valve 20 mm bore , complete all as specified and directed.

Taking down 15mm bore steel tubing and connection includng cleaning for refixing or removal to store complete all as specified and directed

Taking down 20 mm bore steel tubing and connection includng cleaning for refixing or removal to store complete all as specified and directed

RCC 1:1.5:3 normal mix using 20 mm crushed stone agg as in foundation, inclsuing rafts, footings, foundation beams , plinth beams, bases for columns etc complete all as specified and directed

RCC 1:1.5:3 ( Normal mix) as in columns etc (using 20mm graded crushed stone aggregate) complete all as specified and directed

Use and waster of form work to side of pillars, column complete all as specified and directed

M&L for 50 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) finsihed the suface even and fair without using extra cement complete alll as specified and directed

S&F 100 mm dia cast iron soil based and vent pipe an any length with or without ears with cement joint laid in trenches or in floors complete all as specified and directed

S&F 100 mm CI bend (any radius) dimensioning piece or tapper (large bore measured) complete all as specified and directed

S&F 50 mm dia cast iron soil based and vent pipe an any legth with or without ears with cemetn joint fixed to wall complete all as specified and directed

S&F 50 mm cast iron vent cowl complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as speicified and directed

S&F towel ail 600 mm long of PTMT fixed with including chromium palted brass screws and wooden /plastic cleats (min weight 90 gm) complete all as specified and directed

M&L for cutting chases for concealed water tubing of concealed conduct (cutting n.exc 10 cm girth) and making good in CM 1:3 in brick wall complete all as specified and directed

Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit, complete, all as specified.

Taking down ceiling fan any sweep, removing blades, cleaning the fan completly for dust and dirt and hanging the same back to its original position including connecting the 3 core flexible copper wire to ceiing rose etc after the completion the point wiring including replacement old unservicable fan hook, rubber pad, nut bolts and washers etc, complete all as specified and directed by Engineer in charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly, complete all as specified and directed for the following:-

(a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(c) One socket outlet 5Amp controlled by one switch on same board.

(d) One socket outlet 5 Amp controlled by one switch on independent board.

All as per item No.184 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.

S&F switch piano flush type 5 Amps single pole one way, complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed.

S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type, complete all as specified and directed.

S&F of ceiling rose 3 terminal PVC/Polycarbonate isolated body, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed.

S & F Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.

S & F LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 10 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz, complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F LED bulb 7 watt complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.

S & F MCB SPN 40 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

S & F MCB SP 6 to 40 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.

Supply and laying or fixing including removing of existing cable 1100 volts grade cable PVC insulated aluminium conductor un-armoured of 16 Sqmm 2 core flat or circular, served with inner sheathing of pace tape and overall PVC sheathed in service connection suspended by insulated hangers not more than one Mtr apart including 4 mm dia suspension GI wire, complete all as specified and as directed by Engr-in-Charge.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 15067.50 during AOC Note:- Tenderers shall not quote for this Schedule

R.K. Works