SPECIAL REPAIR TO BUILDING NO P-82 AND PROVN OF CERTAIN MINOR WORK AT MADHOPUR UNDER GE BASOLI

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose of soil complete all as specified and directed..

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed...

M&L PCC 1:2:4 type B-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete and in hard standing complete all as specified and directed.

M&L PCC 1:3:6 type C-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed .

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for M-20 (Nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and stair case slab, in shelves, parapets, railing and like(using 20 mm graded crushed stone aggregate) complete all as specified and directed .

TMT Mild steel bars 6 to 8mm dia and ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces as in wall in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10mm thick on brick work or concrete surface in cement mortar 1:4 finished even and rough surface for receiving tiles complete all as specified and directed.

15mm thick screed bedding in cement mortar 1:4 complete all as specified and directed.

20mm thick screed bedding in cement mortar 1:4 complete all as specified and directed.

Rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L hardcore of broken stone or boulders. gauge n.exc 63mm, deposited spread and leveled in layers n.exc 15cm thick. Watered hand rammed to a true surface, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Vitrified ceramic coloured tiles 10 mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified and directed.

Plain cement concrete 75mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete, all as specified and directed .

Supply and fix Manual or push pull type steel rolling shutter thickness of laths 1.25mm, without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete all as specified and directed .

Material and labour for Machine pressed precast concrete interlocking paver block(coloured) with grey cement and pigment any shape and size, M-35 grade 60mm thickness conforming to IS-15658-2006 complete all as specified and directed .

Material and labour for approved quality sand filling as in floor complete all as specified and directed .

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Material and labour for Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and applying two coats synthetic enamel paint, over one shop coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 165 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix in repair PVC board 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc complete all as specified and directed.

Supply and fix Factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified

Supply and fix Factory made 30mm thick fully glazed single piece both side PVC prelaminated door shutter 35mm thick(style) consisting of frame made out of MS square tubes of size 15mmx15mm (15 gauge) on top & bottom rail and 19mm x 19mm (19 gauge) in style. Single piece plain colour PVC sheet for top rail, lock rail, bottom rail on either side and as gap insert for top rail and bottom rail and style panel shall be of wire gauze/glass to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement including 100 mm size PTMT hinges, supplying & fixing in the frame at site as per specification & drawing

Supply and fixing for 30 mm thick Factory made 2nd class hard wood door shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

Supply and fix 2nd class hard wood small fittings such as brackets of any type latch hinges blocked shaped door & window stopper and cleat including all necessay labour articles not exceeding 200cu cm each including 50mm size MS butt hinges complete, all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed..

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed..

S&F steel locking bolts of size 100mm with mild steel electrogalvanised plate and bright bolt not less than 10mm dia,complete all as specified and directed..

S&F Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fix for 100mm size hasp and staple safety type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Supply and fix Mild steel peg set of six. complete all as specified and directed.

Supply and fix aluminium Tie hanger 350mm long. complete all as specified and directed.

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and fix in repair Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 75 mm long complete all as specified and directed.

M&L for preparation of plastered/concrete surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of Black Japan paint complete all as specified and directed.

M&L for applying two coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for complete removal of existing surface of wall and applying two coat of distemper oil emulison over a coat of chalk whitening, complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of distemper oil emulison over a coat of chalk whitening, complete all as specified and directed.

M&L for applying two coats of white washing on walls including preparation of old plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for applying one coat of white washing on ceiling including preparation of old plastered surfaces complete all as specified and directed.

M&L for applying two coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preperation of old plastered surface of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified.

Supply and fix 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve,32mm dia flush pipe, float and handle including connection to pipe complete all as specified and directed.

Supply and fix Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hindware or Cera mark complete all as specified and directed..

Supply and fix vitreous china wash hand basin white angle back of size 400x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and fix sheet glass shelf assembly 5.5mm thick and 120mm wide, sheet glass with chromium plated bracket, guard and railing 6mm long fixed to wall with OVC plug and screw complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps , cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix in repair for 15mm dia bore Stop valve concealed type,long shank cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Taking down steel water tubing of 15/20mm dia including all fittings complete all as specified and directed.

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc complete all as specified and directed.

Refixing for steel water tubing galvenised, 15 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Supply and fix for steel water tubing galvenised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etccomplete all as specified and directed.

Refixing for steel water tubing galvenised, 15 mm bore, in old or new position with all new fittings and fixed to walls, complete all as specified and directed.

Dismantling water tank of capacity 500 litres to 1000 litres complete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 15mm bore complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 20mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed..

Supply and fix sinks with drainage board made of stainless steel 1mm thick overall size 915mmx460mm bowl size 410mm x 330mm x160mm for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar connecting union to pipe, GI waste Pipe 32mm from sink to nahani trap of approved brand including cost of materials, adhesive solution, including coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc. complete all as specified and directed.

Supply and fix Stainless steel kitchen plate rack.of size 750 x 750 x 225mm complete all as specified and directed.

Supply and fix in repair Door eye/magic eye of brass chromium plated,complete all as specified and directed.

Taking down eaves and rain water pipes(any size/pattern) including all fittings complete all as specified and directed..

S&F in repair 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified and directed..

S&F in repair 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floor complete all as specified and directed..

S&F in repair 75 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 106 above, but except pipe complete all as specified and directed..

S&F in repair 50 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 108 above, but except pipe complete all as specified and directed..

S&F in repair 100 mm cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls including two coats of black Japan paint complete all as specified and directed..

All as per item No 110 above, but except pipe complete all as specified and directed..

Supply and fix in repair 100mm dia Bends (any radius) diminishing pieces or tapers (large bore measured) complete all as specified and directed.

Supply and fix in repair 75mm dia Bends (any radius) diminishing pieces or tapers (large bore measured) complete all as specified and directed.

Supply and fix in repair 100mm dia Bends (any radius) with duck's foot or heet rest complete all as specified and directed.

S&F in repair branch pieces, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parralel branches 100mm dia with oval access doors complete all as specified and directed

S&F in repair branch pieces, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parralel branches 75mm dia with oval access doors complete all as specified and directed

Extra for cast iron fitting, if fitted with oval access door for 100mm dia complete all as specified and directed

Extra for cast iron fitting, if fitted with oval access door for 75mm dia complete all as specified and directed

Extra over for cast iron pipe and fitting, if lead joint is provided in lieu of cement joint for 100mm dia complete all as specified and directed

Extra over for cast iron pipe and fitting, if lead joint is provided in lieu of cement joint for 75mm dia complete all as specified and directed

S&F in repair PVC grating, 100mm square/round PTMT complete all as specified and directed

S&F in salt glazed stone ware gully trap, square or round mouthed P-type of size 150x150mm complete all as specified and directed

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall of 110mm dia complete all as specified and directed..

M&L for PVC (SWR) bend of any radius of 110mm bore complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 100mm dia of pipe complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 75mm dia of pipe complete all as specified and directed..

S&F in repair stack clamp made out of 50x5mm MS flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof for 50mm dia of pipe complete all as specified and directed..

Supply and fix cast iron cowls 50 mm complete all as specified and directed..

Supply and fix cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F "P" or "S" trap and fixed in position with 100 mm bore pipe complete all as specified and directed

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 all as specified and directed incl necessary form work. ( Note:-: Steel reinforcement shall be measured and paid for separately under respective items.)

Demolition of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Material and labour for roughening surfacesof old concrete of picking sweeping and washing down with water to remove dust etc including taking down tarfelt and brushing with neat cement slurry @ 3Kg of cement per sqm including 20mm thick screeding in CM 1:4 mixed with water proofing compound complete all as specified and directed by Engineer-in-Charge (WPC shall be measured & paid seperately)..

Material and labour for applying evenly one coat of bitumen primer on roof surface conforming to IS-3384 of 1986 @ 0.30 litres/sqm. and applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application over and including plain cement concrete type B-0 1:2:4 (using 12.5 mm graded stone agg) of uniform thickness 50mm in two layers with chicken mesh of 12mmx12mm of dia 0.91mm between in layers , top surface of plain concrete padding shall be finished even & smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge .

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for Machine cut kota stone slab fooring 20-22mm thick jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and directed.

Material and labour for Machine cut kota stone slab skirting 16-18mm thick over and including 10mm thick rendering in cement mortar 1:3 for kota stone slab skirting in vertical surfaces and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish , complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed .

Siupply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Supply and fix for suspended false ceiling, Decorative Hollow PVC sheet 8-9 mm thick fixed to ceiling section with self drilling screws as per manufacturing instruction. Size of the main supporting section (Ceiling Section) is 80x 26 x 51 mm, Perimeter chanel 20 x 28 x 30 mm, Intermidiate chanel(primary section to support the ceiling section) 15 x 45 x 15 mm and ceiling angle(to provide suspensions from the structural soffit) is 25 x 10 mm , complete all as specified and directed by Engr-in-charge.

Material and labour for 25mm thick plain cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone agg) as in floor finished even & fair surface w/o using extra cement complete all as specified and directed by Engineer-in-Charge .

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 144 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 144 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

All as per srl item No 144 but one light point controlled by two way switch with cable 1.5 sqmm size complete all as per specified and directed.

All as per srl item No 144 but one bell/buzzer point controlled by one push button complete all as per specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Switch piano, flush type single pole, two way 5 Amp. complete all as specified and directed.

Supply and fix Switch Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix bell ding dong, 230 V complete all as specified & directed. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control 200 Watt complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including medium grade PVC non metallic rigid conduit of 20 mm dia and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour), including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 6.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 8 way distribution board for MCB provisions fitted with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz complete all as specified and directed.

Supply and fix LED tube light fitting, 1 x 18W/20W, 230V Energy efficient T8, Box Type, made of CRCA sheet heavy duty industrial type housing, bipin holders, connector block, etc complete with tube rod LED 18/20 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Bajaj Cat Part No 112181 or equivalent in CG/Philips / WIPRO

Supply and fix LED mirror fitting 1x8W, 230V Energy efficient, Box Type, made of CRCA sheet heavy duty industrial type housing, bipin holders, connector block, etc complete with tube rod LED 8 Watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Make : Bajaj/ CG/Philips /WIPRO

Supply and fix exhaust fan 300 mm sweep with louver complete including making all arrangement for holes in brick / stone massonery wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SPN 40 amps with 10KA breaking capacity complete all as per specified and directed.

Supply and fix in replacement sheet metal powder coated VTPN DB double door 4 way with and including MCCB 63 Amps, 415 Volts, 50 Hz AC 25 KA 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified and directed.

Supply and fix exhaust fan 300 mm sweep with louver complete including making all arrangement for holes in brick / stone massonery wall of any thickness grouting of nuts / bolts in wall complete all as specified and directed

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,25 Sq mm X 4.0 core cross section area including takingout existing cable complete all as specified and directed.

Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

M/S DUGGAL CONSTRUCTION CO

BALKRISHAN GUPTA AND SONS

OM SAI RAM BUILDERS

M/S ONKAR SINGH PATHANIA

Shiva Builders

v k engineers and builders

Ms Dalip Kumar and Co.