L082_Ragada Road to Gurundia_Road_Pot hole repair,Bush cutting,flank dressing_0.000 to 1.405

Clearing and grubbing road land including uprooting rank vegitation,grass,bushes,shurbs,saplings and trees grith up to 300 mm,removal of stumps of trees cut erlier and disposal of unsreviceable materials

Construction of Embankment with approved materials obtained from borrow pits with all lead and lifts,tranporting to site by mechanical means within a lead of 5 Km speading,grading to required slope compacting of table 300-2 & Clause 305 of MoRT & H Specification for Road & Bridge works(4th Revision)

Providing,laying,spreading & compacting stone aggregate using IRC Gr-III size Granite metal WBM specification including spreading in uniform specification,thikness,hand packing,Rolling with Three roller 8-10 ton in stages to proper grade & camber, applying & Brooming requsite type of sreening binding material as crusher dust to fill up the interstices of coarse aggregate, Watering & compacting to the required desnsity as for clause 404 of MoSRT & H specification

Providing and Primer coat with bitumen Emulsion(S.S-1)using emulsion pressure distributer at the rate of 0.60 kg per Sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification CL-503.

Providing and applying tack coat with bitumen emulsion(R.S-1) over prepared surface of granular base including cleaning of road surface using emulsion pressure distributer at the rate of 0.30 kg per Sqm with cost, conveyance, royalty, taxes and machineries required for the work complete as per specification and direction of the Engineer-in-Charge

Providing, laying and rolling of Open Graded Pre-Mix Carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using bitumen or emulsion(MS)(Cold Mix) @ 21.5kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant and rolling with a three wheel 80-100KN Static Roller Capacity, finished to required level and grades to be followed by premix seal coat as per Technical Specification Clause 508.2 of MORD and as per direction of Engineer-in-charge.

Providing, laying and rolling of Premix Seal Coat of 6.7mm size chips using Slow Setting Emulsion(Cold Mix) @ 11kg/10sqm to fill up voids of premix carpet including mixing in a suitable hot mix plant & rolling with a three wheel 80-100KN Static Roller Capacity, finished to required level as per Technical Specification Clause 510 of MORD .

Maintenance of road sinage

Clearing vents of CD works & restoration of CD works HPC (OLD & NEW)

White wasing two coats