REPAIR CLEANING OF SEPTIC TANKS SEWAGE LINE SOAKAGE WELL AND CERTAIN ALLIED MISC WORK IN MD ACCN AT JALIPA MIL STN UNDER GE A BARMER

Amount

Taking out/ Dewatering of sewage water/ muddy water/ sludge/ mud/ silt or any other dirty & filthy material at bottom in foul condition from the manhole, septic tanks and soakage well/ pit by using sewage pump/ mechanically or manually by using buckets/ baskets, lifting the same of any capacity upto 4.50M depth from GL and removing the ejected/ obtained material out side the MD land including taking down precast covers and fixing of the same with CM (1:4) after cleaning without damaging complete all as specified and directed.

Cleaning of SWG/RCC/HDPE/PVC pipe sewage line of 75 to 200mm bore in foul condition by rodding the drain/sewage line using flexible rod/suitable device or by any other means for removing blockage from sewar line, mud, silt and any other debries obtained from sewage line with water to remove blockage and cleaning the entire rubbish, sludge etc and burrying the material obtained from sewage line/ removing the ejected/ obtained material out side the MD land including all precautionery and sefety measures etc complete all as specified and directed.

Removing blockage from water closet, floor or gully or Nahani Trap, traps including removal of grating and refix after cleaning with white cement, and bends without damaging by rodding thoroughly and pouring water under pressure and cleaning, clearing the drainage to efficient and smooth flow of sludge/waste water including 75mm and 110mm connecting pipe complete all as specified and directed by Engineer-in-Charge.

Site clearance, like shrubs, vegetation, grass, weeds, trees, saplings and trees, small plants, Kikkar of stem girth n.exc 30cm measured 1m above average ground level including removing the unserviciable material like branches, leaves, grass & garbage to clear the alignment of existing sewage/drainage line to make site workable condition & making good the disturbed ground complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil.

All as per Sl item No. 5 above but exc 1.5m depth and n exc 3.0m depth and getting out hard/dense soil.

Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm.

Removing excavated material n,exc 50 Mtr and depositing where directed at a level of n,exc 1.5 m above the strating point in soil.

M&L for Reinforced concrete pipes 150mm bore class NP-2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, PCC bad and haunching, complete all as specified and as directed.

M&L for cement concrete Type 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation bed concrete of manholes including demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and as directed.

M&L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs/benching and the like including weathering, slightly rounded for chamfered angles and throating including demolition, as directing complete all as specified and as directed.

Demolition of brickwork or stone, PCC block, boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for walling of random rubble uncoursed ,well bonded ,bedded and solidly hearted built in CM (1:4) and brought up to course complete all as specified and directed.

All as per item No.14.00 here in above but except stone.

Extra over lime or sand stone, stone walling for hammer dressing to face stones and dressing or face beds and joints, with maximum depression on face from straight edge held against the dressed surface n exc. 20mm, as specified, of random rubble walling, uncoursed or brought upto courses.

M&L for Pre-cast cement concrete block masonry Type C1, 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and set in CM (1:6), complete complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) mixed with integral WPC on fair faces of brick work or concrete surfaces or stone walls finished even and smooth without using extra cement.

Supply only liquid water proofing compound of approved make all as specified and as directed .

M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) including demolition of cement concrete (reinforced) in floors / pavings, (below or above ground level) n exc 15 cm thick all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of cement concrete (reinforced) in floors / pavings, (below or above ground level) n exc 15 cm thick all as specified and directed.

Formwork to flat rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) (leak proof shuttering) complete all as specified and directed by Engineer-in-charge.

S&F for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and as directed.

S&F for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm provided with access door complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm provided with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

S&F in repairs 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

S&F in repair 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

Cutting into road/ black top/PCC pavement of any thickness including excavation in any type of soil upto 0.50m to 0.80m width and 0.50m to 1.50m depth, refiling, compaction of soil after laying of PCC bed, haunching and pipe, packing and compaction with existing soling/GSB/WBM/WMM, and top surface prepared with 0.15m thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

S&F in rep vitreous china wash down water closet pan (pedestal pattern), white including P or S trap, connection to drain (or outgoing pipe) and to flushing pipe 32mm PVC with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including trap and provn of cement concrete bedding complete as fixed complete all as specified.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.

S&F in repair 15mm bore, 600mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repair 15mm bore PTMT Bib taps standard any colour screwed down for iron pipe and fixed minimum weight 90 gm complete all as specified and directed. Make: Prayag & equivalent.

S&F in repair Grating 140mm made out of round stainless steel complete all as specified and directed.

S&F in repair two way 15mm bore CP fancy type angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and as directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

S&F 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling fixed in repairs all as specified and as directed.

Cutting into existing Main Hole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm.

M&L for Glazed ceramic tiles of size 300mm x 200mm x 7mm/ 450mm x 300mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified.

S&F for Steel work in tubular trusses,post,purlin,rafter including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A,complete all as specified and directed

M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8, type D-2 (40mm graded aggregate) as in floors,hardstanding complete all specified and directed.

M&L for Sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc.complete all specified and directed.

M&L for rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment.

M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick,set in 15mm thick screed bed in cm (1:4) jointed in neat cement slurry in floors with grey pigment cement and pigments.

M&L for 300x300x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 15mm thick screed in cm(1:4), set joinet and pointed in neat cement slurry in floors concrete all as specified and directed.

M&L for 400x400x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 15mm thick screed in cm(1:4), set joinet and pointed in neat cement slurry in floors concrete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete,brickwork,masonary etc. including taking out embedded portion and making good disturbed ground

Dismantling fencing wire mesh, any type complete all specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundation filling in post holes.complete all as specified and directed

S&F MS works in posts and struts in fencing including cutting tops to shape as directed,drilling holes,including all necessary drilling,bolting or reveting,etc,and similar wark conforming to Fe-290 Gde E-165.

M&L 40 x6mm thick flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0.

Supply only chain link fencing ,any size or type complete all specified and directed.

Fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails,starining bolts,etc. including provission of binding wire.

S&F 12 mm dia Mild screw bolts machine made with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 10cm but n exc 15cm long.

M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer.

Dismantling plain or corrugated steel sheeting,fibre glass reinforced translucent sheet any gauge, thickness, including Nainital or similar pattern roof covering

S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws as specified.

S&F of 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

NOTE FOR SL NO. 1, 2 & 3 :- (i) Contractor's supervisor will report on all working days along with Two safai wala at 0830 hrs at AGE B/R-I to receive complaints for blockage and to submit completion report on the same day by 1700 hrs. (ii) Printed complaint slip area wise as per format approved by Engineer-in-Charge shall be provided and maintained by contractor. (iii) Rate quoted above shall be deemed to included the cost of all type T&P, equipment, saftey device etc alongwith sufficient labour to full fill the requirement to the entire satisfaction of Engineer-in-charge. (iv) If threre is any major blockage in sewer line/septic tank/ soakage well/pit for which additional Safaiwalas and special T&P is required same shall be provided by contractor without any extra cost to Govt. therefore contractor is adviced to visit the site before quoting the rates in tender. (v) In the event he fails to attend the complaint recovery @ Rs. 1000 per day shall be effected from the amount due to the contractor.

M/s Malinath Electricals (BID ID -3409567)

Lalit and Brothers (BID ID -3401447)

ASHAPURA ENTERPRISES (BID ID -3401656)