Karnataka

To Be Opened

Works

Buildings

Construction of New Anganawadis (43) and Upgradation of Old Anganawadis (53) in Chitradurga taluk, Chitradurga dist

Rural Development and Panchayat Raj Department

RDPR Division Office Chitradurga | chitradrga, Karnataka

Amount: ₹8.2 CrCloses: 1 Jun 2026Closed

Timeline

Published12 May 2026
Pre-Bid Meeting25 May 2026
Closed1 Jun 2026
Bid Opening2 Jun 2026

Tender Value

₹8.2 Cr

EMD Value

₹12.3 L

Closing Date

1 Jun 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Rafiq ahammed

Mobile Number

9972891068

Work Description

Construction of New Anganawadis (43) and Upgradation of Old Anganawadis (53) in Chitradurga taluk, Chitradurga dist

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT20501

Reference Number

RDPR/2025-26/BD/WORK_INDENT20501

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredDetails of Name and address with contact no.

RequiredI 2.1 PWD Registration Certificate Class I.

RequiredEMD Details.

Required3.3.b Liquid assets and or availability of credit facilities of not less than Rs. 223.65 Lakhs Credit lines letter of credit certificates from banks without any conditions for meeting the fund requirement etc.

Required3.2.b Satisfactory completed as prime contractor at least one similar work such has Building work of Value not less Rs. 410.02 lakhs in the last years Period 2021-2022,2022-23,2023-24,2024-25 and 2025-26 duly signed by not below the rank of Executive Engineer.

Required3.2.a To qualify for award of this contract, each Tenderer in its name should have in the last five years Period 2021-2022,2022-23,2023-24,2024-25 and 2025-26 a. Achieved in at least financial years a minimum 2 financial turnover of in all cases of civil engineering construction works only Rs. 1640.10 Lakhs Usually Not less than two times the Estimated annual payments under this contract Certified by Charted account with P & L Account.

Required3.2.c.executed in any One Year in the last Five year the following minimum quantities of work 1.Earthwork/Embankment 2718.60 Cum 2.PCC/RCC 1726.78 Cum 3.CC Solid Blocks/SSM/BBM 1534.58 Cum 4.Steel 97.58 MT 5.Flooring 3019.63 Sqm 6.Plastering 14678.06 Sqm

Required3.3.Each Tenderer should Availability by required following key and critical equipment and remaining can be deployed on lease or hire the relevant documents are to be furnished. List of machineries on own 1.Tipper 3 No. 2.Water tanker-02 No. 3.Needle Vibrator-02 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No. 6.Batch mix plant 10cum/hour 1No Lease or Hire or Own 1.Tipper 3No. 2.Water tanker-02 No. 3.Needle Vibrator-02, 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No.

RequiredSection 3 1.5 A. Tenderer must submit ongoing works commitments

RequiredInformation on works for which tenders have been submitted and works which yet to be completed.

Required3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity AxNx1.5- B.

RequiredThe Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs 23.86 Lakhs in any one year along with Electrical License Registration copy.

RequiredThe Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works for an amount not less than Rs.9.79 Lakhs in any one year along with Plumbing License/Registration copy.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

The tenderer should be a PWD registered.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

To qualify for award of this contract, each tenderer should furnish qualification information as per clause-3 and section- 3 of Standard Tender Document attached to this tender and all the Formats prescribed in the bid documents shall be filled by the tenderer in full and complete manner.

All scanned documents to be uploaded shall be in original and legible. At the time of opening of technical bid all the original documents should be produced for verification without fail to the Executive Engineer, Superintending Engineer, Chief Engineer. Otherwise the tender will be rejected. During the time of evaluation of bids, if the employer finds any certification / information furnished is false, such tender will be rejected.

Work done certificate should be issued by competent authority not below the rank of Executive Engineer with work indent number is compulsory.

The Financial Bids will be open on the dates mentioned or after approval of the technical bids from the competent authority.

The employer is not responsible for any delay in accessing e - Procurement Portal and the employer is not responsible for non production of uploaded documents in e-Procurement Portal. The tenderer has to ensure that all the documents required are uploaded correctly.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents applicable KWs and further orders thereon. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit(FDR) for an amount equivalent to 5% of the Contract price.

Additional security for unbalanced tenders amount put to tender and quoted amount should be in FDR for 365 day in favour of EE,PRED,Chitradurga. Contractor should be produced before the work order.

The tender of any tenderer who does not accept the conditions contained in the tender document and conditional tenders will not be accepted.

The cost of tender fee shall not be refundable. No interest will be paid by the Government on the Earnest money deposit.

The rates quoted shall be through rates for finished items of work inclusive of all lead and lifts, loading and unloading charges, all incidental charges and all taxes Local or General, Royalty etc., complete payable to the Government or Local bodies in the Region.

The rates quoted shall be inclusive of providing barricading fittings of danger lights, Jungle clearance near work spot / watchman etc., complete and maintained till completion of work and removing on completion as directed by the Engineer-in-charge of work. Rates quoted should includes clearance of site prior to commencement of work and its closure in all respects and holds good for all works under all conditions of site, moisture and weather.

A Cess of the total approved amount of contract will be deducted from the work bill towards the Building and other construction workers welfare in accordance with the Govt. Order No. LD 300 LET 2006 Bangalore dated 18-1-2007. Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. Contractor should follow strictly the prevailing rules of labour act.

All the materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost. All quantity and gradation of metal collected for the works should be got approved by the competent authority before use.

Contractor should execute the project with least impact to the environment. The Contractor should maintain the work during defective liability period as per contract conditions.

Omission and Typographical errors which is in the opinion of the Executive Engineer, will not be a ground for claims of extra payment. If any of the dates mentioned happens to be a general holiday, the next working day will holds good.

Liquid assets and/or availabity of Credit facilities of not less than 30% of amount put to tender (credit lines/ letter credit/ Certificates from banks without condition.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, P.R.E.Division, Chitradurga during office hours on all working days.

All tenders are accepted or rejected by the Executive Engineer,PRED.Division, Chitradurga is reserved.

Profit and loss acccounts and turnovers must be signed by CA with UDIN number.

Condition mentioned in Bid document KW-4 is accepted.

Item rates are excluding GST. GST amount will be paid seperately as per prevailling rules.

Technical Criteria

Capabilities of Vendor

Details of Name and address with contact no

Others -- Details of Name and address with contact no

EMD Details.

Others -- EMD Details.

2.1 P.W.D Registration Certificate Class I.

PWD Registration Certificate (Class I/II/III/IV)

3.3(b) Liquid assets and /or availability of credit facilities of not less than Rs. 223.65 Lakhs (Credit lines/ letter of credit/ certificates from banks without any conditions for meeting the fund requirement etc.

Others -- LOC

3.2(b) Satisfactory completed as prime contractor at least one similar work such as Construction of Building work of Value not less Rs. 410.02 lakhs in the last years Period (2021-2022,2022-23,2023-24,2024-25 and 2025-26) duly signed by not below the rank of Executive Engineer.

Work Done Certificate

3.2(a) To qualify for award of this contract, each Tenderer in its name should have in the last five years Period (2021-2022,2022-23,2023-24,2024-25 and 2025-26) (a) achieved in at least 2 financial years a minimum financial turnover of (in all cases of civil engineering construction works only) Rs. 1640.10 Lakhs (Usually Not less than two times the Estimated annual payments under this contract (Certified by Charted account with P & L Account).

Audited CA Certificate of Annual Turnover

3.2(c) executed in any One Year in the last Five year the following minimum quantities of work 1) Earthwork/Embankment 2718.60 Cum 2) PCC/RCC 1726.78 Cum 3)CC Solid Blocks/SSM/BBM 1534.58 Cum 4) Steel 97.58 MT 5) Flooring: 3019.63 Sqm 6) Plastering 14678.06 Sqm

Others -- Qty. wise work done

3.3.Each Tenderer should further demonstrate Availability by owning required following key and critical equipment and remaining can be deployed on lease or hire the relevant documents are to be furnished. List of machineries on own 1.Tipper 3 No. 2.Water tanker-02 No. 3.Needle Vibrator-02 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No. 6.Batch mix plant (10cum/hour) 1No Lease or Hire or Own 1.Tipper 3No. 2.Water tanker-02 No. 3.Needle Vibrator-02, 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No.

Others -- Vehicle documents

Section -3 1.5 (A) Tenderer must submit ongoing works commitments

Others -- ongoing works

Information on works for which tenders have been submitted and works which yet to be completed.

Others -- tenders have been submitted

address with phone no

Others -- address

Address with phone no

Others -- address

The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works for an amount not less than Rs.9.79 Lakhs (in any one year) along with Plumbing License/Registration copy.

Others -- Plumbing License/Registration copy

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs 23.86 Lakhs (in any one year) along with Electrical License/Registration copy.

Others -- ELECTRICAL WORKDONE

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AxNx1.5 B ) A Maximum value of civil engineering works executed in any one year during the last five years (Updated 2026-27 price level ) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which Tenders are invited 1/12years. B Value, price level, of existing commitments and on-going works to be completed during the next. 11/12 years from the probable date of award of this contract.

Others -- Bid capacity

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹12.3 L

Important Dates

Last Activity

12 May 2026

Published

12 May 2026

Bid Opening

2 Jun 2026

Download Ends

30 May 2026

Pre-Bid Meeting

25 May 2026

BOQ Preview

•

Construction of New Anganawadis (43) and Upgradation of Old Anganawadis (53) in Chitradurga taluk, Chitradurga dist

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils upto depth not exceeding 300mm as per drawing and tec...

•

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m as per drawing and technical Specifications, including setting out, shoring, strutting, barricading, caution lig...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 1 cement 6 coarse sand PWD SR 2023-24, Vol II, P. No. 9, I. No. 5.4

•

Filling available excavated earthexcluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramm...

•

Providing and laying in Reinforced cement concrete for all Basement surface level works return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and f...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls sunken floors etc The granite/trap/basalt crushed graded coarse aggregates and ...

•

Providing and laying in Reinforced cement concrete for all Basement surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height. The gr...

•

Providing Thermo-Mechanically Treated bars of grade Fe 550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sa...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 1 cement :4 coarse sand) incl...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 51 cement 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar ...

•

Providing and placing on terrace at all floor levels polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over...

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansio...

•

Providing 15 mm cement plaster with cement mortar 1:3 1 cement: 3 coarse sand finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corner...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 1 cement: 4 fine sand to brick masonry including rounding off corner...

•

Providing Colour washing such as green, blue or buff to give an even shade :New work two coats with a base coat of white washing with lime with colour of approved quality, after thoroughly brooming th...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle green, ...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 and conforming to I.S. 15622, of approved make, in all colours...

•

Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed includi...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Wall painting with acrylic emulsion paint, having VOC Volatile Organic Compound content less than 50 grams litre, of approved brand and manufacture, including applying additional coats wherever requir...

•

Finishing walls with water proofing cement paint of required shade :New work Two coats applied 4.84 kg 10 m to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete an...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...

•

Providing and fixing IS 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100 58 1.90mm PWD CSR 2023-24, Vol II, P. No. 107, I. No. 12.74.2

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm PWD CSR 2023 24, Vol-II, P. No. 107, I. No. 12.73.1

•

Providing and fixing bright finished brass tower bolts barrel type with necessary screws etc. complete 150x10mm PWD CSR 2023-24, Vol II, P. No.107, I. No. 12.76.3

•

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.PWD CSR 2023-24, Vol II, P. No. 105, I. No. 12.58

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms PWD CSR 2023-24, Vol II, P. No.105, I. No. 12.64

•

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

•

Providing fixing of louvered ventilator made out of multi chambered PVC Matching to RAL 9016 sections and with minimum Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and lead free with gask...

•

Providing fixing of 2.5 track 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2(Titanium Dioxide at 6PHR with TPEThermo Plastic Elastomer and...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting t...

•

Providing fixing fly proof wire gauze to windows, clerestory windows doors with M.S. Flat 15 3 mm and nuts bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture ...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofin...

•

Art Painting on Walls Lettering with black Japan paint of approved brand and manufacture to givean even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, ...

•

Finishing walls with textured exterior paint of required shade :New work Two coats applied 3.28 L 10 m over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade ...

•

Earth work excavation for Foundation by mechanical means for all works depth upto 3 m, as per drawing and technical Specifications, including setting out, shoring, strutting, barricading, caution lig...

•

Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar 1:6 (1 cement 6 coarse sand) PWD SR 2023-24, Vol-II, P. No. 9, I. No. 5.4

•

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied 4.84 kg 10 m to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mort...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structura...

•

Providing and fixing brass bib cock of approved quality PWD SR 2023-24, Vol II, P. No.117, I. No. 13.2.2 20mm NB Brass Bib Cock

•

Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length, 20 mm nominal bore PWD SR 2023-24, Vol II, P. No. 118, I. No. 13.8.2.2

•

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe wit...

•

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.PWD SR 2023 24, Vol II, P. No. 133, I. No. 14.8 Pedestal for W...

•

Providing and fixing Stainless Steel A ISI 304 (18 8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

roviding and laying water proofing treatment to the Water tanks Liquid Retaining structures with two component acrylic polymermodified cementitious waterproofing membrane with minimum elongationof 50 ...

•

Providing and laying in Reinforced cement concrete for all Basement surface level works, return walls, retaining walls, sunken floors etc The granite/trap/basalt crushed graded coarse aggregates a...

•

Providing Thermo Mechanically Treated bars of grade Fe 550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

•

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)1988 and IS 12592 (part-II) 1991 with latest amendment,including cutting slabs to the required size for the opening and fixing ...

•

RCC rings for Soakpit Providing and laying 100mm thick pre-cast cover slabs over Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 500 6kg m2, sla...

•

Providing and laying in Reinforced cement concrete for all Basement surface level works, return walls, retaining walls, sunken floors etc.The granite trap basalt crushed graded coarse aggregates a...

•

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in c...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured In cement mortar PWD SR 2023-24, Vol-II, P. No. 188, I. No. 19.11.2

•

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer in charge. Of area 3 m and below PWD SR 2023-2...

•

Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.PWD...

•

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material to the appropriate disposal area as per direction of Engineer incharge. Asbestos Sheet work PWD SR 2023-24...

•

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge.PWD SR 2023-24, Vol ...

•

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Concealed PVC Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal PVC Junction boxes, adhesive paste etc and running before con...

•

PVC metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box (PWD CSR for Electrical Works for the Year 2023-24, Part-1) 1920mm Deep Junction Box

•

PVC metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box (PWD CSR for Electrical Works for the Year 2023-24, Part-1) 25mm Deep Junction Box

•

Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering...

•

Metal Fan Box Supplying And Fixing Metal Fan Box with Round Hook (PWD CSR for Electrical Works for the Year 2023-24, Part-1)

•

Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 1.5mm (Phase Neutral) 1 1.0 mm2 Earth wire FRLS multi strand PVC insul...

•

Wiring for Lightings Power Circuit Wiring for lighting power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed...

•

Modular Switches Sockets Regulators etc Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(PWD CSR for Electrical Works for the Y...

•

4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.(PWD CSR for Electri...

•

Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON OFF energy cross 3 with S...

•

MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps bolts nuts etc with provision for fixing suitable type capacity MCB...

•

GI Grounding pipe B Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe 7.3 Kgs (BESCOM CSR for the Year 2023 24, Part II) P-32 I.No-...

•

1 1 kV XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part1 or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 BESCOM CSR f...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards an...

•

Laying of cable inExisting Trench GI pipe Stone Ware RCC Hume pipe using Wooden Aluminum Rollers as directed by the departmental staff BESCOM CSR for the Year 2023-24, Part IV

•

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

•

Consultancy Charges 1.0 of Net Total :Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz AC Supply complete.(PWD CSR for Electrical Works for the Year 202...

•

Ceiling Fans Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 V 50 cycles Single phase AC supply conforming to ISS 3741979 and with double...

•

PVC Batten with LED Tubes Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input 220 240V 50 ...

•

LED Down Lights Supply of round square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connec...

•

Lamp Holder Supplying Fixing of 70 150 Watts lamp holder 2 Pin (PWD CSR for Electrical Works for the Year 2023 24, Part 1)

•

Fixing all type of Luminaries Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0 0076 twin twis...

•

Fixing of Fan Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rosnece...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps ceiling rose wi...

•

Fixing of LED Lights Fixing all types and all capacities of 1 4 2 2 LED Light fittings indoor on the wall ceiling rafters girders with necessary supporting frame, using 23 0.0076 twin twisted PVC ins...

•

Extra for excavating trenches for pipes, cables and similar works in all kinds of soil where excavation width is upto 600 mm for depth exceeding 1.5 m, but not exceeding 3 m. add 20 extra Rate is over...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Coursed rubble masonry first sort with hard stone in foundation and plinth with Cement mortar 1 6 1 cement 6 coarse sand as per technical specifications and directions of the Engineer in-cha...

•

Providing Size Stone masonry with hard stone in foundation plinth with Cement mortar 1 6 1 cement 6 coarse sand as per technical specifications and directions of the Engineer in-charge of Work (PWD C...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height.The grani...

•

Providing Thermo Mechanically Treated bars of grade Fe 500 or more Steel reinforcement for R.C.C FE work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

•

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ram...

•

ADD for formwork centring Scaffolding Above Item of SR Consider for Footing Foundation 8 of M20 Concrete (PWD SR for Buildings VOL I for the year 2023-24. Addendum I P.No. 111)

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 6 1 cement 6 coarse sand includ...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand finished with a top layer 6 mm thick cement plaster with cement mortar ...

•

ADD for formwork, centring Scaffolding Above Item of SR Consider for Columns 10 of M20 Concrete (PWD SR for Buildings VOL I for the year 2023-24. Addendum I P.No. 111)

•

Finishing walls with water proofing cement paint of required shade New work Two coats applied 4.84 kg 10 m to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge 0.50 mm 0.05 total coated thickness with zinc coating 120 grams p...

•

Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved ...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 4 1 cement 4 coarse sand includ...

•

Providing 12 mm cement plaster with cement mortar 1 4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding, inclu...

•

Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS 13983 with C I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls 1.25 L 10 m over and including one coat of Spec...

•

Finishing walls with textured exterior paint of required shade New work Two coats applied 3.28 L 10 m over and including priming coat of exterior primer applied 2.20kg10 m to give an even shade after...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied 0.90L 10 m over an under coat of primer applied 0.80 L10 m of approved brand and manufacture including prepa...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot cold water supply, including all CPVC plain brass threaded fittings, including fixing the pipe with cla...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 20 mm nominal bore ((PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.12 P.No. 120)

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Dismantling roofing including ridges, hips, valleys and gutters etc.and stacking the material to the appropriate disposal area as per direction of Engineer in charge Asbestos cement sheet (PWD CSR VO...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40 40 6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and ...

•

Providing and fixing glass wool slab 12mm thick resin bonded slab with density 48kg m3 for insulation of cavity wall, fixed using GI wire 200 SWG, GI chicken mesh 12.50mm 24 SWG including necessary cr...

•

Providing and laying vitrified floor tiles with thickness 910 mm in different sizes with water absorption less than 0.08 and conforming to IS 15622, of approved make, in all colours and shades, laid o...

•

Addendum I Additionalities for Formwork, Centering Scaffolding for Chajja 45 (PWD CSR VOL I for the year 2023-24. Sl. No. 19 , P.No. 111)

•

Providing and Applying high elastic resilient Acrylic polymer Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existi...

•

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually control...

•

Providing and placing on terrace at all floor levels polyethylene water storage tank IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overf...

•

Providing and laying Ceramic glazed floor tiles of size 300 300 mm thick ness to be specified by the manufacturer of 1st quality conforming to IS 15622, of approved make, in all colours, shades, excep...

•

Demolishing cement concrete manually by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge (SR 2023-24 Vol 02 Page No.188 Item No. ...

•

Providing and fixing unplasticised P.V.C connection with PTMT Nuts, coller and bush of approved quality and colour 15mm nominal bore with 450mm length SR 2023-24 Vol 02 Page No.121 Item No. 13.27.2

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A inncluding jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expansi...

•

Supplying PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joi...

•

Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature wherever required and fitting the...

•

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 1.5 sqmm Phase Neutral 1 1.0 mm 2 Earth wire FRLS multi strand PVC insulated copper wire confirm...

•

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

•

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 4 5...

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V 50Hz AC supply completely wired on existing box (PWD Ele SR Vol-6 2023-24. I. No. 3.7 P.No. 9)

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc and fixing on existing wooden or metal box using N.F screws. (PWD Ele SR Vol 6 2023 24. I. No. 3.8 P.No.9 ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle canopies etc for operation on 230 V 50 cycles. Single phase AC supply conforming to ISS 374 1979 and with double ball bearin...

•

Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module (PWD Ele SR Vol-6 2023-24. I. No. 3.6.4 P.No....

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-4 Anganawadi CTA 20501 F CE final Corrected.doc

Tender Document • 3.67 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].