Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Finance | ₹3.0 L | L1 | Admitted-Finance |
| 2 | L2₹3.7 L+₹70,612 (23.2%)Admitted-Finance | ₹3.7 L+₹70,612 (23.2%) | L2 | Admitted-Finance |
| 3 | L3₹5.6 L+₹2.6 L (84.1%)Admitted-Finance | ₹5.6 L+₹2.6 L (84.1%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | FAVOURITE INTERNATIONAL L3 | M/s. Development Electrical L2 | J.M.T CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 8 | sqm | 13.4 ₹107.2 Lowest | 50 ₹400 | 100 ₹800 |
| 2.00 | Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 109 | sqm | 7.14 ₹778.26 Lowest | 10 ₹1,090 | 150 ₹16,350 |
| 3.00Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. | ||||||
| 3.10 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 15 | kg | 900 ₹13,500 | 650 ₹9,750 | 55 ₹825 Lowest |
| 4.00Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | ||||||
| 4.10 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 3 | sqm | 1,550 ₹4,650 | 1,500 ₹4,500 | 75 ₹225 Lowest |
| 5.0015 mm cement plaster on rough side of single or half brick wall of mix: | ||||||
| 5.10 | 1:6 (1 cement: 6 coarse sand) | 8 | sqm | 20 ₹160 Lowest | 680 ₹5,440 | 500 ₹4,000 |
| 6.00 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 7 | sqm | 1,550 ₹10,850 | 1,550 ₹10,850 | 1,000 ₹7,000 Lowest |
| 7.00 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | 3 | sqm | 11.62 ₹34.86 Lowest | 300 ₹900 | 500 ₹1,500 |
Tender Value
₹3.6 L
EMD Value
₹7,300
Closing Date
28 May 2026, 3:00 pmClosed
HEAD, ESU
ENGINEERING SERVICES DEPARTMENT, CSIR-CGCRI, KOLKATA
Civil and electrical renovation and modification work of Room No. 138 and 142, 4M Division at CSIR-CGCRI, Kolkata.
2026_CSIR_277869_1
GCW/CE/11/25-26(W)
Open Tender
Construction Works
Works
60 days
CSIR-CGCRI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
CENTRAL GLASS AND CERAMIC RESEARCH INSTITUTE
₹7,300
7 Jul 2026
20 May 2026
29 May 2026
20 May 2026
28 May 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | |||||
| 2Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | |||||
| 3Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. | |||||
| 3.1 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 4Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 4.1 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
| 515 mm cement plaster on rough side of single or half brick wall of mix: | |||||
| 5.1 | 1:6 (1 cement: 6 coarse sand) | - | sqm | - | - |
| 6Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | |||||
| 7Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.58 MB
DOCUMENT.pdf
Tender Documents • 1.56 MB
SAFETY_PROTOCOLS.pdf
Other Document • 1.23 MB
ANNEXURE-B.pdf
Other Document • 0.22 MB
ANNEXURE-A.pdf
Other Document • 0.46 MB
DRAWING.pdf
Other Document • 0.09 MB
MAKE_LIST_ELECTRICAL.pdf
Other Document • 0.41 MB
SCOPE_OF_WORK.pdf
Other Document • 0.41 MB
BOQ_324499.xls
BOQ • 0.29 MB
CHECK_LIST.xls
Additional Documents • 0.03 MB
DETAILS_OF_BIDDER.xls
Additional Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .