SPL REPAIRS TO INTERNAL BLACK TOP ROAD AT CERTAIN LOCATION OF HATTIGOR MIL STN UNDER GE RANGIA

Amount

M & L for preparing of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed.

M&L for applying for applying evenly a priming/tack coat with RS I grade cationi emulsion @ 2.5 Kg per 10 Sqm using mechanical sprayer on black top surface, complete all as specified and directed..

M & L for bituminous premix asphaltic semidense concrete 40 mm consolidated thickness with 5.5% binder content of paving bitumen VG-30 grade by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed.

M & L for premix bituminous, macadam with 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as directed.

M&L for applying for applying evenly a priming/tack coat with RS I grade cationi emulsion @ 7.5 Kg per 10 Sqm using mechanical sprayer on black top surface, complete all as specified and directed.

M & L for repair to pothole any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth making making good by applying tack coat of emulsion RS I Grade @ 2.5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder9.8 kg per 10 sq m, blinded with0.09 cu m of stone chippings, 6.3 mm size and again well rammed(including supply of premixed macadam, binder and chippings).good by filling in screened & complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fix in repairs Convex mirror 1000 mm made of PC Material provided with suitable MS Pipe post, duly powder coated meant for road turning, intersections, curves, T-junctions, Hospitals, Parking lots etc., with clear & define mirror image having 130 degree of viewing angle, unbreakable & stronger than glass, spring, post (710 x 80 x 210 mm) body of spring is made of special flexible material (polyuthrethane) without itcan be quicly resorted to its original state without doing any damage without doing any damage to spring posts as well as vehicles in case of collision by vehicles. Two bands of retro reflective tape are pasted on the spring post. Epoxy bond is used to fix spring post with road surface the bond is so strong that post will not be deviated by strong impact after installation length of spring post 710 mm , upper dia 80 mm & bottom dia is 210 mm complete all all as specified and directed by Engr-In-Charge.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

SUNIL KUMAR VERMA (BID ID -3471397)

M/s Anurag Baishya (BID ID -3476828)

M/S SEWAK SINGH (BID ID -3470724)