Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bideder | |
| 2 | L2₹51.6 L+₹2.4 L (4.94%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹51.9 L+₹2.7 L (5.50%)Rejected-Finance 174 BAKSARA L M C SARANI JAMRULTALA HOWRAH WEST BENGAL 711110 | HOWRAH | WEST BENGAL | 711110 | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹52.4 L+₹3.2 L (6.56%)Rejected-Finance UPPER BAGDOGRA PO BAGDOGRA DIST DARJEELING PIN 734014 WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹52.5 L+₹3.3 L (6.62%)Rejected-Finance SOUTH DESHBANDHUPARA BB GHOSH SARANI NEAR DESHBANDHU VIDYAPITH SCHOOL PO SILIGURI TOWN 734004 DIST DARJEELING WB | JALPAIGURI | WEST BENGAL | 734004 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BENGDUBI
Bengdubi Military StationPO-Bengdubi,Dist-Darjeeling, Pin 734424
PERIODICAL SERVICES TO CERTAIN OTM AND MD ACCN OF DEPOT UNITS UNDER AGE B R I OF GE BENGDUBI MIL STN
2023_MES_580277_1
8418/E8
Open Tender
Civil Works
Item Rate
270 days
GE BENGDUBI
MES Enlisted/ Un-enlisted contractor of Class D and above with category a(i)
8 documents required · 8 mandatory
₹500
GE BENGDUBI
₹90,000
Yes
16 Mar 2023
10 Feb 2023
6 Mar 2023
10 Feb 2023
3 Mar 2023
25 Feb 2023
11 Feb 2023 - 16 Feb 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 on walls on fair faces of brick work finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Chalk whiting, on plastered surfaces, prepara-tory to cement base paint complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.
M&L for preparing of old existing treament and stopping of distempered and painted surfaces of wall and applying two coat of oli bound distemper (any tint) over 1mm thick wall care putty on walls complete all as specified and directed.
M&L for preparing of old existing treament and stopping of distempered and painted surfaces of ceiling and applying one coat of oli bound distemper (any tint) complete all as specified and directed.
M&L for preparation of old wall painted surface and removal of nails etc & filling cracks/ hole with putty, applying wall care putty upto 1mm thick as required and apply two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.
M&L for preparation of old pained wooden surfaes of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.
M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.
M&L for preparing plastered or unplastered old surface of ceiling including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.
M&L for preparation of old floor painted surface and apply one coats of Apex paint over a coat of primer complete all as specified and directed.
M&L for preparing of old existing surfaces and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.
M&L for preparing of old existing treament and stopping of distempered and painted surfaces and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surfaces complete all as specified and directed.
M&L for preparing of old existing treament and stopping of distempered and painted surfaces of wall and applying one coat of oli bound distemper (any tint) complete all as specified and directed.
Rewriting repainting existing writing letters or figures (block roma, roman, italic, Indian n exc 30 cm heigh) complete all as specified and directed.
M&L for preparation of old painted surface of wall and apply one coats of plastic emulsion paint over a coat of primer complete all as specified and directed
M&L for preparation of old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nails etc & filling cracks/ hole with putty, and applying one coat of cement based paint (any tint) on walls by auto roller complete all as specified and directed as per manufacturer's instruction complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nails etc & filling cracks/ hole with putty,applying wall care putty upto 1mm thick as required (multypurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surfaces complete all as specified and directed. Note:-Acrylic emulsion paint/emulsion distemper /Plastic emulsion paint, painting methdology using preparation of old decorated plastered surfaces of wall shall be carried out through Vacuum based sanding machine for scraping etc after preparation of surface wall care putty upto 1mm thick as required shall be carried out as specified under schedule A notes of SSR part-I (multipurpose mixer shall be used for uniform and proper mixing of putty) then one coat of primer same make of paint and base shall be provided on wall/ceiling by normal manner as mentioned in SSR part-I finally the Acrylic emulsion paint/emulsion ditemper /Plastic emulsion paint through Air less spray by using auto roller shall be carried out. Make of paint and tools shall be one of the BERGER/ASIAN/TECHNO COMMERCIAL EQUIVALENT shall be used as approved by GE/AGE.All work shall be carried out through approved applicator of manufacturer of paint only.The same shall be approved before carried out the work from GE/AGE.
Taking down chowkats or frames with shutter(without taking off shutter from the frame) area not exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats of any description without taking of shutter from the frame) area exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing form site of work complete all as specified and directed.
S&F Pressed steel frame of size 105X60mm for doors with one or moe rebates including necessory fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.
S&F Pressed steel frame of size 125X60mm for doors with one or moe rebates including necessory fixing lugs, hinges, lock strike plates etc,complete all as specified and directed.
S&F 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 30mm thick, 2nd class hard wood glazed and skeleton window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b).Window complete all as specified and directed.
S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.
S&F Factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (Stiles), with 2,4, or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face & 2 mm plain colour PVC sheet on back face with particle Board core complete all as specified and directed.
S&F steel windows with side hung shutters including projection type hinghs with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including projection type hinghs with steel handle, and steel pag stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung double shutter ( one for glazing and other for mosquite proofing ) including projection type hinges with steel handle, and steel peg stay, complete with guard bars, dovetailed or welded complete all as specified and directed.
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading all as directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 250mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 150 mm for wooden doors complete all as specified and directed.
S&F mild steel butt hinges medium weight 100mm in size for wooden doors complete all as specified and directed.
S&F 150 mm aluminium handles cast type anodised complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface exc 10 cm in girth or width complete all as specified and directed.
S&F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.
Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.
S&F figured glass pin head type 4mm thick and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
Taking down steel tubing and connection 15mm bore complete all as specified and directed.
Taking down steel tubing and connection 20mm bore complete all as specified and directed.
S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 15 mm complete all as specified and directed.
S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 20 mm complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall l complete all as specified and directed.
S&F in repair for stack clamps of flat iron 50mmx5mm thick and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe complete all as specified and directed..
S&F PVC (SWR) vent Cowl for 110 mm bore pipe complete all as specified and directed.
S&F PVC (SWR) bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm,complete all as specified and directed.
S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed.
S&F PVC (SWR) junction single, Single T equal or unequal for 110 mm bore of pipe complete all as specified and directed.
Schedule of Credit refer Srl Page No 29 (R) of Subject Tender
M/S K M CONSTRUCTION
MS CHOWDHURY ENTERPRISE
SHRI S K BHATTACHARJEE
M/S BOSE CONSTRUCTION
Paritosh Saha
M/S CONTRACTS
MUKHERJEE ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .