For the Work of Business Plan 2024-25 for Load Bifurcation, Additional Installation Transformer and Replacement Damaged VCB Works Under EUDD-II, Meerut.

Amount

Cartage of line material, Stay Rod, ACSR weasel/Rebit / ABC XLPE conductor ear thing rod Cross arms11KV pin Insulator ,Disc fitting MS Channel ,MS Angle, clamps all complete material etc&. from store Center /JE store to site of work including loading and unloading at both end.

Cartage of Control Panel/VCB 33 KV double T/F from central store to 33/11 KV S/S site of work including loading and unloading at both endes

Dismentling of control panel/VCB by opening of control panel cable/leads and shifting of damaged control panel to the safe side in all respect

Installation of control panel/VCB for 33 KV double T/F by providing and fixing of control panel leads/relay etc. complete in all respect

Providing & fixing charge 24 V Battery & battery charger from central store to 33/11 KV S/S site of work including loading

Safe Cartage of 33 KV control cable for double T/F from central store to 33/11 KV S/S site of work including loa

Laying 33 KV control cable for double T/F

Safe Cartage of 11 KV Bus coupler from central store to site of work including loading and unloading at both endes

Dismentling of 11 KV old bus coupler

Installation of 11 KV Bus coupler

Safe cartage of following T/F from store centre or any other place to the respective site of work through the kaccha pakka road including the work of its loading & unloading at the respective ends. Including the work of dragging etc .including the cost of labor ,T&P and carrier etc. required for proper completion of work(0-50 Km) (A) 250/400 KVA

Installation of following T/F on the double Pole Structure /Plinth in proper alignment and as per direction of engineer in charge/RESPO manual. It include the cost of labor ,T&P ,Carrier etc. required for proper completion of work (A)250/400 KVA (On double Pole structure)

Safe Cartage of following poles from store center or from any other place to the respective site of work through the kuchha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging etc and also including the cost of labor, T&P carrier etc. required for proper completion of work,(up to 50 KM)

PCC Pole 11 mtr long

ST Pole 11 mtr long

Erection of single/double support PCC Poles 11 Mtr long/ ST poles 11 meter long including complete H.T/L.T fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labor, T & P and carrier etc. required for proper completion of work.

Errection Charge singhal PCC/S.T. Pole.

Grouting/Concreting of pole

Errection Charge double Pole structure.

Construction of plinth in all respect (all material will be provided by the contractor)

Water level earthing of neutral and body of distribution transformers of 11/0.4 kv transformers by boaring of earth upto water level (15 to 20 Mtr.) and lowering of GI Pipe 32 mm dia upto water level and connecting the same by ms flate of size 40x4 mm with transformers. The transformer will be earthed properly including/cutting, jointing, welding etc. of MS Earth Strip and connecting one earthing with the neutral bushing of transformer and other to the body of transformer at several points. The GI Pipes will be connected to each other with the help of G.I. Sockets and a cap will be provided on the upper part of the G.I. Pipe for pouring of water during summer season.

Fabrication and providing of wire mesh Fencing frames of size 2M×2M×1.5M fabricate out of MS Angle iron of size40X40X6MM2 having 2NO legs of 45Cm long in each frame duly welded and fixing with wire mesh of size 25MM X 25MM X 10SWG hot dipped galvanized with in the frame pressed under MS Flats of size 40X5MM inside the angle on all four side with help of approx 20 No Bolt & Nuts of 10mm diameter 45Cm Legs of frame will be grouted in 1:2:4 cement coarse send and 20MM gauge stone blast in the size of 0.22X0.22X0.45Meter, Every will be painted with one coat of Red oxide and two coat of Aluminum paint of approved mark after proper cleaning. Providing and fixing of wire mess fencing around on plinth of T/F with wire gauge 25×25 mm, MS Angle 50 × 50 × 6 mm with gate the size of plinth size 2M×2M×2.5M wire mess fencing height 1.25 Mtr.

Laying sagging stringing and binding and jump ring etc of following conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labor, T&P, carrier etc required for proper completion of work.

ACSR Wesal/Dog Conductor

11 KV XLPE cable 3x120 Sq. mm

LT XLPE cable 1x240 sqmm

LT ABC (3x95+1x70+1x16)sq mm

Laying of under ground 11 KV XLPE cable 3x185

Ear thing of each supports with MS earth rod of 2.5 Mtr long including excavation of pit and driving of MS rod up to proper depth and connection the earth electrode with the help of GI wire and SWG.

Filling of 11 KV 3x185 Sq.mm Outdoor cable box

Laying & Excavation of 33 KV XLPE cable with HDEP pipe

Erection and grouting of stay set including the work of nuzzling etc. as per RESPO manual and also including the cost of all grouting material, labor, T&P etc required for proper completion of work

Fixing 11 KV fuse set

Providing and fixing of tailless unit

Providing & Fixing Clamp & Nut Bolt off size

Providing & Fixing LT Aluminum lugs as per site requirement

Recived back material

Cartage old & damaged 33 KV control panel for single & double T/F scrap from site of work to je store and JE store to central store including loading and unloading at both endes

Cartage old & damaged Bettery Charger & battery set 24 V. from site of work to je store and JE store to central store including loading and unloading at both endes

Cartage old & damaged bus coupler from site of work to je store and JE store to central store including loading and unloading at both endes

Cartage old & damaged cable AL. 3x185 Sq.mm XLPE 11 KV from site of work to je store and JE store to central store including loading and unloading at both endes

BHARDWAJ ENTERPRISES