Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.3 LAccepted-AOC 133 GARFA MAIN ROAD KOLKATA 700 078 | KOLKATA | KOLKATA | WEST BENGAL | 700078 | ₹76.3 L | L1 | Accepted-AOC AOC |
| 2 | L2₹84.8 L+₹8.5 L (11.2%)Rejected-Finance | ₹84.8 L+₹8.5 L (11.2%) | L2 | Rejected-Finance Higher than L1 |
| 3 | L3₹86.0 L+₹9.7 L (12.7%)Rejected-Finance 13 RAMLAL MUKHERJEE LANE P O KHAGRA DIST MURSHIDABAD PIN 742103 | KHAGRA | MURSHIDABAD | WEST BENGAL | 742103 | ₹86.0 L+₹9.7 L (12.7%) | L3 | Rejected-Finance Higher than L1 |
| Sl No | Description | Qty | Unit | R.N.ROY ELECTRICAL CONTRACTOR H2 | BHATTACHARYYA ENTERPRISE H1 | Prava Enterprise H3 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling the existing defective 01 no panels,main Distribution boards (VTPN DB's, HTPN DB's, SPN DB's, & Main switch - approx 20 nos ) cables along the bus duct from ground floor to 8th floor) and aluminum wirings(including 600 points & 180 computer board and power plug ,switch board etc) with all defective connecting accessories etc including (loading & un loading ) carrying the same to the dumping area without disturbing the day to day Govt works as well as providing uninterrupted power supply by temporary arrangement with protection as per direction of EIC.(Considering 6 nos Semi-skilled electrician and 6 nos. unskilled helper) | 1 | job | 99,960 ₹99,960 | 6,500 ₹6,500 Lowest | 34,903.81 ₹34,903.81 |
| 2.00A:-New LT panel (AC PANEL):- Supply,Installation,Testing & Commissioning (incl loading unloading , Brick founation 18 inch from base and 3 inch from surround & Sand Filling) of Cubical type floor mounted LT panel Board of suitable dimension comprising of the following electrical accessories fabricated from 40X40X5 mm MS angle and 40mmx5mm iron flat for all compartments & 14 SWG CRC Sheet and 75 mm base channel (two nos) with necy. Welding incl painting with 2coats of powder coated paint over 1 coat of RO primer as per GS. Autocad drawing with CPRI certificate ,test certificate to be submitted and must be approved by EIC before construction of panel. Full panel structure with internal compartment structure of the panel must be made with the above noted angle iron and MS flat iron. INCOMING a) S & F 415V 400A FP Switch disconnector fuse unit open execution type (L&T) with nuts bolts etc incl. S & F 3 Nos din type HRC fuse -- 01 nos Base Channel : 75 x 40 x 40 mm MS Base Channel (C Channel) has to be provided after derusting, degrazing with two coats of Back Japan paint over one coat of RO primer. | ||||||
| 3.00OUT GOING a)S & F 415V 100A TPN Switch disconnector fuse unit open execution type (L&T) with nuts bolts etc incl. S & F 3 Nos din type HRC fuse as per rating - 10 nos | ||||||
| 4.00BUSBAR :: Bus Bar Materials : Electrolytic Gr Copper, 90% & above pure in nature (Certificate from Mfg. with challan to be submitted), semi soft, tined electroplated with heat srinkable PVC sleeve. Size of Bus Bar : 4 No. x 80 mm x 10 mm per phase (total 4 nos. RYBN) suitable for 1000A current ratting. Feeder Connection : Electrolytic Gr Tinned Cu Bus Bar : 1) For incoming main switch 4 x 40x 10mm copper bar, For each 100A - 4 No. x 25 mm x 3 mm (total 4 Nos. RYBN) / As per Apvd. Drawing;. 5.6 Gr Stainless Steel Bolt to be provided for Bus Bar Connection. Bus Bar Support Material : FRP (thickness minimum 10 mm for main bus) Acralyic Sheet / Backelite guard to be provided in front of VBB / Bus Alley. | ||||||
| 5.00CABLE ALLEY cable alleys on both sides for out going connection are to be made incl. S & F suitable size of bus bar having current carrying capacities as per the out going switches rating.Proper ventilation system (louver) with net guard and supporting arrangement system for cable must be there.Adequate space must be provided for termination according to the cable size to be connected with switches. | ||||||
| 6.00 | READING ARRANGEMENT
a) S & F digital Multifunction meter (L & T,MFM 5010 LED meter CI 1 with RS 485 Cat No. WL501011OOOO) ---1 no( for incoming)
b) 400A/5A CT Coil ( Kappa Make) - 3 nos (for incoming)
c) LED type indicating lamp ( R Y B, L&T or Siemens make ) - 3 nos
d) 6 A MCB ("C" curve, Legrand) --- 3 nos
e) Danger board -- 01 no
All metering connection are made by suitable size of copper wire. | 1 | item | 3,75,000 ₹3,75,000 | 1,78,000 ₹1,78,000 Lowest | 2,05,000 ₹2,05,000 |
| 7.00 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.
(a)415 A(Make-L&T/Siemens) | 2 | item | 21,000 ₹42,000 | 19,297 ₹38,594 Lowest | 20,000 ₹40,000 |
| 8.00 | Supplying and fixing double door sheet steel (16SWG), powder coated 4 way Vertical cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment | 2 | Nos | 1,000 ₹2,000 Lowest | 1,187 ₹2,374 | 1,700 ₹3,400 |
| 9.00 | Supplying and fixing 415V, 400 A FN TPN SDF( L & T , Cat no- SK95481) (open execution type) with 03 nos DIN HRC Fuse of rating 400 A (L & T, Cat no. SF94335) on the exisiting Main switch enclosure after replacing exisiting one on that LT panel as per direction of E.I.C. in the existing panel with necessary fixing arrangement | 2 | nos | 23,000 ₹46,000 | 15,640 ₹31,280 Lowest | 20,000 ₹40,000 |
| 10.00A:-New LT panel (RISING PANEL):- Supply,Installation,Testing & Commissioning (incl loading unloading , Brick founation 18 inch from base and 3 inch from surround & Sand Filling) of Cubical type floor mounted LT panel Board of suitable dimension comprising of the following electrical accessories fabricated from 40X40X5 mm MS angle and 40mmx5mm iron flat for all compartments & 14 SWG CRC Sheet and 75 mm base channel (two nos) with necy. Welding incl painting with 2coats of powder coated paint over 1 coat of RO primer as per GS. Autocad drawing with CPRI certificate ,test certificate to be submitted and must be approved by EIC before construction of panel. Full panel structure with internal compartment structure of the panel must be made with the above noted angle iron and MS flat iron. INCOMING a) S & F 415V 400A FP Switch disconnector fuse unit open execution type (L&T) with nuts bolts etc incl. S & F 3 Nos din type HRC fuse -- 01 nos Base Channel : 65 x 40 x 40 mm MS Base Channel (C Channel) has to be provided after derusting, degrazing with two coats of Back Japan paint over one coat of RO primer. | ||||||
Tender Value
₹95.4 L
EMD Value
₹1.9 L
Closing Date
16 Dec 2024, 2:00 pmClosed
EE_KCED_PWD
Khadya_Bhawan_11A_Mirza_Ghalib_Street_Block_A_3rd_Floor_Kokata_700087
Renovation of Electrical Installation comprising mainly overhauling of LT power supply,switches and old panel ,wiring of different floors of Annex Building-I, Sales Tax Complex, Beliaghata.
2024_PWDE_772094_1
WBPWD/EE/36/IR/T/KCED/II of 2024-25
Open Tender
Electrical Work/ Equipment
Item Rate
60 days
Sales Tax Complex, Beliaghata
Please refer Tender documents.
4 documents required · 4 mandatory
₹1.9 L
Office_of_EE_KCED_PWD
11 Sept 2026
21 Nov 2024
18 Dec 2024
21 Nov 2024
16 Dec 2024
29 Nov 2024
28 Nov 2024
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .