Restoration of BT Surface at Ravindranath Tagore Road in Ward No.30 and Athipalayam Road in Ward No.19, North Zone. Package No.VIII

Amount

Advance Bitumen Patch repair work with bituman 80/100 premixed chips 50 mm thick 13.20 mm IRC HBG metal premixed with 44 kg Bitumen per cubic metre of Chips to the road and consolidation thick of 50 mm with all cost of materials and labour charges etc completed as per the standard specification

Earth work excavations in all soils and sub-solls and the full depth as may be directed by the Deptl.officers with initial leads and lifts and cleaning and leveling the site etc, complete complying with standard specification

Conveying the excavated earth and for milling materials to the work site to designated dumping yard from the site to the distance of 0 to 15kms out side of the city limit including all initial lead, Wf, loading and unloading with transportation charges etc complete as per the direction of departmental officers.

Providing GRANULAR SUB.BASE - GRADE —1 using material as per 401.2.1 viz., sand, morum, gravel, crushed stone individuals or combine thereof which satisfies the grading III as per table 400.1 and satisfies the physical standards given in clause 401.2.2 and gives the 20 CBR Including cost and conveyance of earth ail materials and hire and machinery charges of toots and plants employed and ail other incidental charges as per MORTH revision IV

Wet Mix Macadam 75mm thickness Providing and laying, spreading and compacting graded stone aggregate Wet mix macadam (VMM) specification Including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper site laying in uniform layers with paver in sub base / base Course on well prepared surface and compacting with vibratory rower to achieve the desired density Complete as .clause 406 of MORTH Specification

Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of Morth Specification

Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1) cluding cost of bitumen emulsion at the site, Including labour charges for preparing the Surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen prayer etc., complete over the primed surface as per clause 503 of MoRTH Specifications Rev.5

Providing and laying Tack coat over the existing bituminous surface using 2.0 kg of bitumen emulsion (Rapid Setting 1) per 10 Sq.m area including cost of bitumen emulsion at the site, including labour charges for preparing the surface, and applying the required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete as per Clause 503 of MoRT&H Specifications Rev.S

Providing and laying 50 mm compacted Bitumenous macadam using 0.42m3 of 26.511.2 mm graded metal and and 0.10m3 of 11.2 - 2.8mm graded metal and 0.18m3 of 2.8mm & below with 38kg of bitumenous for premixing per 10 m2 including cost and conveyance of all materials to CMP site heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 Tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50 mm with mechanical paver to the specified grader and cross sections and compaction by 80-100 KN power roller to the required density ete including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc including hire charges and Fuel charges for 20-30T CMP with bitumen Boiler, tipper trucks, paver Finisher Power rollers and all other tools and plant required including all other tools and plant required including specification using cmp clause 504 of most

Providing and laying Bituminous Concrete 30mm thick using 19 ~ 9.50 mm metal, 9.52.36 mm Metal, 2.36 mm and below Metal of specified grading aggregates and Quarry Dust with 37.73 kg of VG30 (60/70grade) bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sq.m including cost and conveyance of all materials work site and stacking them on road side to standard departmental metric gauge for pre-measurement, heating the bitumen in bitumen boiler heating the aggregates and mixing them with bitumen in mini hot mix plant, spreading the mix in the required temperature for uniform thick of 30mm over a previously prepared surface to specified grade and cross section and compaction by power roller, including labour charges, spreading etc., including Hire charges for machineries etc., complete as per clause 509 of MoRT & H Specifications to achieve the desired compaction.

Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803