RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled No T – Shirt ( 1050 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY Utility Unisex * DIMENSIONS Size Double Extra Large (XXL) Large (L)
RequiredDouble Extra Large (XXL) Length of T Shirt (cm) 80 ( Double Extra Large ) * Width Across Chest (cm) 60 ( Double Extra Large ) * Sleeve Length (cm) 64 ( Double Extra Large
RequiredFull Sleeve ) * 1/5 Depth of hemming/binding at neckline
Requiredsleeve end and bottom binding 3 cm * MATERIAL Material ( composition ) 100% Polyester 100% Polyester Mass of Material (g m²) 200 160.0
Required200.0 Knitting Plain ( Single Jersey ) Knitted Plain ( Single Jersey ) Knitted
RequiredInterlock knitted Count of Yarn (Ne) - * pH value of aqueous extract 6.0 to 8.0 ( Hot Method
Requiredas per IS: 1390 ) * Neck Binding/Collar Rib Knitted Fabric ( 1 X 1 Rib ) * Bottom Hem ( Bottom Binding ) Rib Knitted Fabric ( 1 X 1 Rib ) * Sleeve end Binding Rib Knitted Fabric ( 1 X 1 Rib ) * Lining Without Lining Without Lining Lining Material 100% Polyester Mesh * Mass of Lining (Gram per Square Meter) 65 * Netting mesh No of holes on base & bias within 625 Square millimeter 120 * Colour of Mesh Lining Same as colour of the base fabric * PATTERN Neck Type With Collars and Buttons With Collars and Buttons Sleeve Type Raglan * Sleeve Half Sleeve Half Sleeve Number of Buttons in T Shirt with Collar 2 * Side Slit Without * Depth of side slit ( in case of T Shirt with Side Slit) (cm) Not applicable * Pocket Without Pocket Without Pocket Size and position of pocket ( in case of T Shirt with Pocket ) ( Width X depth ) Not applicable * 2/5 STITCHING Sewing Thread 145 d tex X 3
RequiredPolyester * Raw edges
Requiredif any shall be bound by overlock stitching Yes * Stitches per dm ( min ) 36 * COLOUR Colour Blue Blue
RequiredRed
RequiredGreen
RequiredYellow
RequiredBleached White
RequiredDyed assorted colours (Solids )
RequiredStriped
Requiredyarn dyed
RequiredPrinted
RequiredSelf Design
RequiredAs per buyer's requirements COLOURFASTNESS OF FABRIC AND DEPARTMENTAL LOGO Colourfastness to Washing [IS/ISO 105-C10
RequiredTest- C (3)] Change in Colour – 4; Staining of Adjacent Fabric – 4 * Colourfastness to perspiration ( IS 971 ) 4 * Colourfastness to Rubbing ( IS 766) Dry – 4/Wet – 3 * Colourfastness to Light ( IS 2454 ) 5 * Colour fastness – Potential to phenolic yellowing of fabric 4 ( Test method – ISO 105-X18:2007
RequiredLatest) * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Change in Colour- 4; Staining of Adjacent Fabric- 4 * Colourfastness to perspiration ( IS 971 )- Mesh Lining 4 * OTHER REQUIREMENTS Pilling Resistant [after 5 hours Test as per IS 10971 (Part 1)]
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and width wise direction 3 * Spirality
Requiredpercentage
RequiredEnumerable +/- 4 N/A Mandatory max ( After one wash ) ( IS/ISO 16322-1:2005 ) ( Washing as per ISO 6330- 2A at 60 degree C ±4 * 3/5 Label with Tag * LOGO AND MARKING Logo Marking As per buyer's requirements As per buyer's requirements Type of Logo Printed * Embroidery Thread for Logo Not applicable * TEST REPORT Availability of Test Report from NABL/ILAC accredited or Central Government Lab to prove conformity of products to the specification. Yes * Name of the Lab - * Address of The Lab - * Test Report No. - * Test Report Date - * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Yes * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
