SPECIAL REPAIR REPLACEMENT FOR CONVERSION OF OVERHEAD LINE INTO LT UG CABLE FOR CSQ MD ACCN AND JCOs ORs MD ACCN AT MANDIR LINE UNDER GE WELLINGTON

Amount

Excavation in trenches not exceeding 1.5 meter deep and not exceeding 1.5 meter wide and gettting out in Soft/ Loose soil for laying of under ground cable, and foundation of poles, etc complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and directed.

Removing of excavated soil/ material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Spreading clean dry riddled sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as specified and as directed. Note: Punned thickness only shall be measured and paid.

Bricks sub class ‘B’ to be laid over dry sand cushioning in trenches as protection to cable all as specified and directed.

Cutting PCC/ road 200mm thick for laying of cable all as specified and directed.

Supply, lay and testing in trench, ducts or floor or along the surface of wall, cable XLPE insulated screened PVC bedded, galvanised Steel Strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5Core x 150Sqmm complete all as specified and directed.

Supply, lay and testing in trench, ducts or floor or along the surface of wall, cable XLPE insulated screened PVC bedded, galvanised Steel Strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5Core x 120Sqmm complete all as specified and directed.

Supply, lay and testing in trench, ducts or floor or along the surface of wall, cable XLPE insulated screened PVC bedded, galvanised Steel Strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4Core x 25Sqmm complete all as specified and directed.

Supply, lay and testing in trench, ducts or floor or along the surface of wall, cable XLPE insulated screened PVC bedded, galvanised Steel Strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 4Core x 16Sqmm complete all as specified and directed.

Supply, lay and testing in trench, ducts or floor or along the surface of wall, cable XLPE insulated screened PVC bedded, galvanised Steel Strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2Core x 16Sqmm complete all as specified and directed.

Supply, install, testing and commissioning of factory made CPRI approved LT panel board 415 Volts, 50 Hz, 250 Amps capacity outdoor cubical type LT disribution switch gear and control gear, leg mounted, totally enclosed, cubical type modular compartment , dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thick ness not less than 3.15 mm complete with 2 mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50mmx50mmx6mm with cable chamber for incoming, outgoing connections comprising for the following including necessary PCC foundation of minimum 0.20 Mtr height positioned and fixed with suitable nuts, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables all as specified and directed. (a) Aluminium Bus bar four wire system 415 volts mounted on procelain heat shrinkable insulator & sleeve suitable for 400 Amps for phases and 200 Amps for neutral . (b) LED type Indicating lamps for all the three phase with different colour lamp red,yellow and green.- 1 set (c) Digital multi function panel meter measuring voltage, Amps and frequency with suitabe CTs and backup protection - 1 No (d) Danger notice board of size 200mm x 150mm x 1.6mm thick of mild steel sheet vitreous enamelled white and letter figur and convention skull and bones of signal red colour and fixed/revited with panel- 02 Nos (e) Incoming (i) MCCB 3 pole with nuetral link, 35 KA, 250 Amps 415 volts - 01 No (f) Outgoing (i) MCCB 3 pole with nuetral link, 35 KA, 160 Amps 415 volts - 01 No (ii) MCCB 3 pole with nuetral link, 25 KA, 63 Amps 415 volts - 02 Nos (iii) MCCB 3 pole with nuetral link, 25 KA, 40 Amps 415 volts - 01 No (iv) MCCB 3 pole with nuetral link, 16 KA, 40 Amps 415 volts - 01 No

Supply, install, testing and commissioning of factory made LT panel board No. 02, TPN 415 Volts, 50 Hz, 320 Amps capacity outdoor cubical type LT disribution switch gear and control gear, leg mounted, totally enclosed, cubical type modular compartment , dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thick ness not less than 3.15 mm complete with 2 mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50x50x6mm with cable chamber for incoming outgoing connections comprising for the following including necessary PCC foundation of minimum 0.20 Mtr height positioned and fixed with suitable nut, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables all as specified and directed. (a) Aluminium Bus bar four wire system 415 volts mounted on procelain heat shrinkable insulator & sleeve suitable for 500 Amps for phases and 250 Amps for neutral . (b) LED type Indicating lamps for all the three phase with different colour lamp red,yellow and green.- 1 set (c) Digital multi function panel meter measuring voltage, Amps and frequency with suitabe CTs and backup protection - 1 No (d) Danger notice board of size 200mm x 150mm x 1.6mm thick of mild steel sheet vitreous enamelled white and letter figur and convention skull and bones of signal red colour and fixed/revited with panel- 02 Nos (e) Incoming (i) MCCB 3 pole with nuetral link , 35 KA, 320 Amps 415 volts - 01 No (f) Outgoing (i) MCCB 3 pole with nuetral link 35 KA, 160 Amps 415 volts - 02 Nos (ii) MCCB 3 pole with nuetral link, 25 KA, 100 Amps 415 volts - 02 Nos (iii) MCCB 3 pole with nuetral link, 16 KA, 40 Amps 415 volts - 01 No

Supply, install, testing and commissioning of factory made CPRI approved 415 Volts, 50 Hz, 250 Amps capacity outdoor cubical type LT disribution switch gear and control gear, leg mounted, totally enclosed, cubical type modular compartment , dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thick ness not less than 3.15 mm complete with 2 mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50mmx50mmx6mm with cable chamber for incoming, outgoing connections comprising for the following including necessary PCC foundation of minimum 0.20 Mtr height positioned and fixed with suitable nuts, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables all as specified and directed. (a) Aluminium Bus bar four wire system 415 volts mounted on procelain heat shrinkable insulator & sleeve suitable for 400 Amps for phases and 200 Amps for neutral. (b) LED type Indicating lamps for all the three phase with different colour lamp red,yellow and green.- 1 set (c) Digital multi function panel meter measuring voltage, Amps and frequency with suitabe CTs and backup protection - 1 No (d) Danger notice board of size 200mm x 150mm x1.6 mm thick of mild steel sheet vitreous enamelled white and letter figur and convention skull and bones of signal red colour and fixed/revited with panel- 02 Nos (e) Incoming (i) MCCB 4 pole , 35 KA, 250 Amps 415 volts - 01 No (f) Outgoing (i) MCCB 4 pole, 35 KA, 160 Amps 415 volts - 02 Nos (ii) MCCB 4 pole, 25 KA, 100 Amps 415 volts - 01 No (iii) MCCB 4 pole, 25 KA, 63 Amps 415 volts - 01 No (iv) MCCB 4 pole, 16 KA, 40 Amps 415 volts - 01 No

Supply, install, testing and commissioning of factory made LT panel board No. 04, TPN 415 Volts, 50 Hz, 200 Amps capacity outdoor cubical type LT disribution switch gear and control gear, leg mounted, totally enclosed, cubical type modular compartment , dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thick ness not less than 3.15 mm complete with 2 mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50mmx50mmx6mm with cable chamber for incoming, outgoing connections comprising for the following including necessary PCC foundation of minimum 0.20 Mtr height positioned and fixed with suitable nuts, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables all as specified and directed. (a) Aluminium Bus bar four wire system 415 volts mounted on procelain heat shrinkable insulator sleeve suitable for 400 Amps for phases and 200 Amps for neutral. (b) LED type Indicating lamps for all the three phase with different colour lamp red,yellow and green.- 1 set (c) Digital multi function panel meter measuring voltage, Amps and frequency with suitabe CTs and backup protection - 1 No (d) Danger notice board of size 200mm x 150mm x 1.6mm thick of mild steel sheet vitreous enamelled white and letter figur and convention skull and bones of signal red colour and fixed/revited with panel- 02 Nos (e) Incoming (i) MCCB MCCB 3 pole with nuetral link, 35 KA, 200 Amps 415 volts - 01 No (f) Outgoing (i) MCCB MCCB 3 pole with nuetral link, 25 KA, 63 Amps 415 volts - 03 Nos (iii) MCCB MCCB 3 pole with nuetral link, 16 KA, 40 Amps 415 volts - 01 No

Supply, install, testing and commissioning of factory made CPRI approved 415 Volts, 50 Hz, 250 Amps capacity outdoor cubical type LT disribution switch gear and control gear, leg mounted, totally enclosed, cubical type modular compartment , dust and vermin proof IP-54 with neoprene gasket, fabricated out of CRCA sheet of thick ness not less than 3.15 mm complete with 2 mm thick for internal compartment duly powder coated fixed on angle iron pedestal made out of 50mmx50mmx6mm with cable chamber for incoming, outgoing connections comprising for the following including necessary PCC foundation of minimum 0.20 Mtr height positioned and fixed with suitable nuts, bolts, washers etc to the pedestal and connecting all incoming and outgoing cables all as specified and directed. (a) Aluminium Bus bar four wire system 415 volts mounted on procelain heat shrinkable insulator & sleeve suitable for 400 Amps for phases and 200 Amps for neutral. (b) LED type Indicating lamps for all the three phase with different colour lamp red,yellow and green.- 1 set (c) Digital multi function panel meter measuring voltage, Amps and frequency with suitabe CTs and backup protection - 1 No (d) Danger notice board of size 200mm x 150mm x 1.6mm thick of mild steel sheet vitreous enamelled white and letter figur and convention skull and bones of signal red colour and fixed/revited with panel- 02 Nos (e) Incoming (i) MCCB MCCB 3 pole with nuetral link, 35 KA, 250 Amps 415 volts - 01 No (f) Outgoing (i) MCCB MCCB 3 pole with nuetral link, 25 KA, 100 Amps 415 volts - 02 Nos (ii) MCCB MCCB 3 pole with nuetral link, 25 KA, 63 Amps 415 volts - 03 Nos (iii) MCCB MCCB 3 pole with nuetral link, 16 KA, 40 Amps 415 volts - 01 No

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth strip 32 x 6mm from earth plate to body of the equipment by means of nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earth testing point on completion with and including 15mm bore light grade GI protection pipe (7.5mtr long) for earth including PCC (1:2:4) type B1 chamber pit with cover slab pre cast RCC (1:2:4) type B1, 40mm thick reinforced with 6mm dia MS bars @ 100 c/c bothway, lifting hooks made out of 6mm MS bars, watering arrangement with funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified and directed

Dismantling of ACSR complete all as specified and directed.

Dismantling of cross Arms of MS channel or angle sections etc complete all as specified and directed.

Dismantling of Insulator any type and size etc complete all as specified and directed.

Saket Enterprises

sree devi construction