COMPREHENSIVE MAINTENANCE REPAIR/ REPLACEMENT OF INTERNAL WIRING LED LIGHTS/HOT WATER GEYSERS/SECURITY LIGHS/EXHAUST FAN AND CONNECTED ITEMS AT MARRIED ACCOMMODATION AT DAHUNG PH-III AT TENGA OF AGE E/M UNDER GE TENGA

Amount

Taking down copper/aluminium point wiring (light, Bell, fan, socket or power) complete and removing material to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of wall /ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down copper/aluminium submain wiring complete for taking credit and making good the disturbed surfaces of wall/ceiling so as to match with the existing

M&L for Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top coveralongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly with complete all as and specified directed by Engr-in-Charge.

One light /Fan/Bell point controlled by one switch 6/5 Amp.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch indep board.

M&L Point wiring of Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLS copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing PVC board heavy duty incl providing plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.

M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including taking down unserviceable one and making good to disturbed surfaces complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly including taking down unserviceable one and making good to disturbed surfaces complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections incl dismentling taking down unserviceable one all as specified and directed.

S&F switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts including taking down unserviceable one complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 6 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 16/15 Amp piano flush type (ISI marked), 240 Volts including taking down unserviceable one complete all as specified & directed.

S&F bell push piano type one way 5/6 Amp, 240 volt including taking down unserviceable one complete all as specified & directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals including taking down unserviceable one complete all as specified & directed.

S&F lamp holder insulated body with back plate suitable for batten fittings including taking down unserviceable one complete all as specified & directed.

S&F bell electric AC 240 volt, 50 HZ including taking down unserviceable one complete all as specified & directed.

S&F Regal Batten for LED Tube, universal batten for G 13, T8 lamps complete with all accssories internally pre wired and incl connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable including Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelight with 10% THD with very high efficiency suitable for intalltion in T8 Tubelinght with G 13 lamp holders to give glare free light with integrated electronic driver and mounting casing box 2 Nos including taking down unserviceable one complete all as specified and directed. Make: Crompton Greaves Cat Part No IGP161LT-8-16 & LTT8-20 or equivalent in Phillips/Bajaj/Havells

S&F Photon Ultra Plus LED Tubelight 20 Watt (Single Side Connection) Ultra bright LED polycarbonate Tubelingt with 10% THD with very high efficiency suitable for intalltion in T8 Tubelight with G 13 lamp holders to give glare free light with integrated electronic driver including dismantling taking down unsv tube rod any type complete all as specified and directed. Make: Crompton Greaves Cat Part No LTT8-20 or equivalent in Philips/Bajaj/Havells

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including taking down unserviceable one complete all as specified and directed. Make : Crompton Greaves - Cat Part No LBHP-10-CDL or equivalent in Philips / Bajaj / Havells

S&F LED lamp 9watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed .

S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.85 (min) including taking down unserviceable one complete all as specified and directed .

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site all as specified and directed.

S&F MCB DB CRCA sheet powder coated vertical type TPN 6 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables incl taking downt existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB DB CRCA sheet powder coated SPN 4 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCCB 40/63 Amps, Four Pole, 16 KA 415 Volt including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand

S&F thermostat ISI marked suitable for geysers 25 Ltrs to 50 Ltrs Capacity complete all as specified and directed.

S&F fusible plug ISI marked suitable for 25 to 50 ltrs capacity Geysers complete all as specified and directed.

S&F heating element ISI Marked round/triangular bas, push type or thread type including rubber washers for 1.5/2.0 KW suitable for 25 to 50 ltr capacity Geysers complete all as specified and directed.

S&F innner water container ISI Marked made of stainless steel, vertical or horizontal type suitable for existing 25 ltr capacity geyser complete all as specified and directed.

S&F outer body container ISI Marked, vertical or horizontal type suitable for existing 25 ltr capacity geyser complete all as specified and directed.

S&F aparatus plate ISI marked suitable for vertical/horizintal type Geyser 25 to 50 ltr cap complete all as specified and directed.

S&F heavy duty PVC connections pipe with brass hexagonal adoptersat both side 15mm dia and 450mm long for hot /cold water all as specified and directed.

M&L for Rewinding of Exhaust fan 250/300 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, blades and testing complete. Note: 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, blade, capacitor, shall be measured and paid separately as supply only.

Supply only ball bearing of size 6201/6202/6203 suitable for exhaust fan 250/300 mm sweep as per manufacture instruction complete all as specified and directed.

Supply only fan condensor cap 1/1.8 MFD suitable for exhaust fan 250/300 mm sweep as per manufacture instruction complete all as specified and directed.

Supply only louvers suitable for exhaust fan 250/300mm sweep with necessary fixing arrangement complete all as specified and directed.

S&F Exhaust fan motor suitable for exhaust fan 250/300 mm sweep as per site requirement complete including necessary fixing complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion with complete all as and specified directed by Engr-in-Charge. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Supplying & Fixing of plug top, 3 pin, 15Amps all as specified and as directed

Supplying & Fixing of plug top, 3 pin, 5Amps all as specified and as directed

M/S R N ENTERPRISES

D.P. Traders

M/S ASHOK CONSTRUCTION

M/S N D ENTERPRISE

M/S POLAR AGENCIES

M/S DKT CONSTRUCTION

M/S SUNRISE CONSTRUCTION AND CO