ADDL ALTN CUM SPECIAL REPAIR TO OFFRS ACCN IN HASTING LINE AND SPECIAL REPAIR TO BUNGLOW NO. 08 PONAPPA ROAD AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.

Amount

Complete removal of old plaster surface of wall and applying Premium Acrylic Smooth exterior paint with Silicone additives of required shade including Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on one coat or two coats of 1 mm thick wall care putty complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type B-2 using 40 mm graded crushed stone aggregate in plinth protection finished even and fair including necessary formwork and cutting of joints complete all as specified.

S&F in repair for 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make: Jaquar cat part COP-273PM or Commercially equivalent in Cera /Parryware

S&F for corner glass self (with bracket) complete all as specified and directed. Make :Jaquar Cat part ACN-CHR-1173 or Commercially equivalent in Cera / Parryware

S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed. Make :Jaquar Cat part SHA-CHR-479L450 or Commercially equivalent in Cera / Parryware

S&F for in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F for waste coupling 32mm size full thread with (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60ms) complete all as specified and directed.

S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-769L300X190 or Commercially equivalent in Cera / Parryware

S&F for Pillar taps, swan neck fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and irected. Make :Jaquar / Cera / Parryware

S&F for Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat part OPP-CHR-15005BPM or Commercially equivalent in Cera / Parryware

S&F for angular stop cock with wall flange complete all as specified and directed. Make: Jaquar Cat part OPP-CHR-15053PM or Commercially equivalent in Cera / Parryware

S&F for frameless swivel mirror complete all as specified and directed. Make :Jaquar Cat part ACN-1195N or Commercially equivalent in Cera / Hindware

S&F in repair Towel ring chromium plated complete all as specified and directed. Make: Jaguar Cat Part No. ACN-1121BN or Equivalent in Cera / Hindware

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device with and including 'P' and 'S' trap complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F for two way bib cock with wall flange complete all as specified and directed. Make : Jaquar cat part KUP-CHR-35041PM or Commercially equivalent in Cera / Parryware

S&F for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed. Make : Jaquar cat part ALD-CHR-573 or Commercially equivalent in Cera / Parryware.

S&F for toilet paper holder with flap complete all as specified and directed. Make : Jaquar cat part AQN-CHR-7753 or Commercially equivalent in Cera / Parryware

S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F for single lever sink mixer with swinging spout on upper side(wall mounted model) with connceting legs and wall flanges complete all as specified and directed. Make : Jaquar cat part LYR-38165 or Commercially equivalent in Cera / Parryware

S&F for 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed

S&F for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed

S&F for 18 mm thick 100% Solid PVC Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed.

S&F of stainless steel handles 138 mm size for kitchen cabinet shutters complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 8" with necessary fixing clips and channels etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (Cargo basket) pull out type, size 486 x 550 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed.

S & F of chrome plated stainless steel wire basket (under sink basket) pull out type, size 900 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed.

S&F of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed.

S&F Providing and fixing factory made upvc white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete as per manufacturer's specification and direction of Engineer - In- Charge.

S&F 4.8mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane fixed in door / window shutter complete all as specified and directed.

S&F Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like incl moulding the edges etc, and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 complete all as specified.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed.

Complete removal of old decorated surfaces of wall with scrapping machine tools /electric hand grinder with wire brush and applying two coat of oil bound distemper white or tintedwith paint sprayers with 1mm thick one or two coats of wall care putty complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished surface even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty with paint sprayers complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed.

Preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed.

S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified.

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and end caps / knobs complete all as specified and directed.

S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed.

M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material,fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (d) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed.

M&L for cement concrete 1:5:10,type E2 (40 mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed.

M&L for 32 mm bore galvanised steel tubes 'medium grade' as in sunken spout pipe complete all as specified and directed.

Cutting holes in full brick walls, built in cement mortar for inserting of sunken pipe , holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast ,etc. complete all as specified and directed.

M&L for 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer in Charge.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

M&L for vitrified light shade floor tiles (double charged ) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Description all as per item no 69 above but as in skirting / dado fixed with and including 10 mm thick rendering in cement mortar 1:4 on wall complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles fixed over and including 10mm thick rendering in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for preparation of old painted surface of wooden work and applying one coat of synthetic enamel paint on surfaces of any description exc 10 cm width or girth with paint sprayers complete all as specified and directed.

M&L for Preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified & directed.

M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces , over 10 cm in width or grith not other wise described complete all as specified and directed.

Surface excavation in soft / loose soil n.exc 30cm deep and averaging 15 cm deep and getting out complete all as specified.

Ditto as per Item No 78 but Add for each 3 cm depth or part there of,over or under 15cm average depth for 90 mm depth complete all as specified and directed.

Dismantling of bricks (laid flat or on edge ) or brick tiles in floors, channels, kerbs aprons etc complete all as specified and directed.

100 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in sub base flooring complete all as specified & directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified & directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with particle board core, with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all aspecifed and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 X 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick factory made wire mesh solid WPC Door Shutter consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. as per manufacturer's specification & drawing complete all as specified and directed.

S&F in repair powder coated anodised aluminium powder coated Grill of size 75 x 75x 4mm thick for windows , including joining cleat, anodized aluminum strip beading screw complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work (Make: Armstrong/metacil or equivalent as approved) complete all as specified and directed including all necessary drilling, cutting, making good and necessary arrangement to fix electrical items as under:- (a) 25x25x1.5mm thick GI angle powder coated plugged along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed

M&L for preparation of old painted surface of steel and iron of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F MS Butt hinges medium wt cold rolled of size 125 mm complete all as specified and directed.

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed.

S&F aluminium bow handle,cast type,anodised 100mm long complete fixed with steel screws complete all as specified and directed.

S&F aluminium bow handle,cast type,anodised 150mm long complete fixed with steel screws complete all as specified and directed.

S&F Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed 300 mm long complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Demolition of brick work built in cement mortar and removing rubbish complete all as specified and directed.

M&L for Brick work with fly Ash old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (triple layer white colour) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank (triple layer white colour) of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 25mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

S&F for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed in walls ceiling or laid in floors complete all as specified and directed. .

S&F for 20mm bore steel tubes “medium grade” galvanised with all fitting and fixed in walls ceiling or laid in floors complete all as specified and directed. .

S&F for 25mm bore steel tubes “medium grade” galvanised with all fitting and fixed in walls ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia with new fittings complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified & directed.

S&F in repair 15mm bore, CP Bib taps fancy type long body , half / full turn , screwed down for iron pipes complete all as specified and directed. Make: Jaguar Cat Part No.CON-107KN or Equivalent in Cera/ Parryware

S&F in repair CP brass, soap dish, superior quality complete all as specified and directed. Make: Jaguar Cat Part No.ACN-1131N or Equivalent in Cera / Parryware

M&L for in repair 15mm angle valves/ stop cock, fancy type, chromium plated , cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Make: Jaguar Cat Part No.CON-059KN or Equivalent in Cera / Parryware

S&F in repair, two way angle valve chromium plated, brass 15mm bore complete all as specified and directed. Make: Jaguar Cat Part No.CON-041KN or Equivalent in Cera / Parryware

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete all as specified and directed.

S&F PVC (SWR) Bend 75mm dia complete all as specified and directed.

S&F PVC (SWR) Bend 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed

S&F in repair PVC (SWR) nahani trap plain with grating including jointing with solvent cement 75/100mm dia complete all as specified and directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F in repair vitreous china table top wash basin, white, of size 480 X 370mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware Cat Part No. 10049 or Equivalent on Cera / Jaquar

S&F in repair Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for complete removal of existing finishes of wall including cornices etc and applying 1-2mm thick white putty in one or two coat and applying two coat oil bound distemper over a one coat of exterior water based primer by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.

M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots,removal of vegetation and applying Two coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

S&F in repair 25mm dia stainless steel Drapry rod fixed with decorated brackets and with end knobs complete all as directed and specified

Demolition of lime mortar or PCC unreinforced of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 all as specified and directed.

M&L for cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., all as per Manufacturer's specifications and as specified & directed.

M&L applying two coat of Dr Fixit sure ceal damproof chemical on plaster/unplastered surfaces complete all as specified by the manufacture . Make- pedilite and equivalent of johnson.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified & directed.

M&L for Expanded metal not exc 4 kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified & directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified & directed.complete all as specified & directed.

Dismantling of wooden unservceable battens in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section complete all as specified & directed.

Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in CM 1:4 (measured on vertical face in contact with old wall only) complete all as specified & directed.

M&L for Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc. including rubbed finish and waste complete all as specified & directed.

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality A complete all as specified & directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde-E-250) quality A complete all as specified & directed.

Dismantling of Allahabad tiles roofing sheets in wall cladding or in roof covering complete all as specified and directed.

M&L for Pre- painted galvalume zinc coating aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fixed with self tapping screws complete all as specified & directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed.

Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out in any type of soil complete all as specified & directed.

Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified & directed.

Removing of surplus excavated/demolised materilas to a distance exc 1.5Km and deposited where directed at a level n. exc 5 Km above the starting point complete all as specified & directed.

Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified & directed.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M&L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. (Note:- Punned thickness of 18 mm shall be measured for payment purpose only)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 4 core all as completed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core all as completed.

S&F Pipes galvanized iron , “Light Grade ”, complete including fittings 40 mm dia laid in trenches / passing through under ground road crossing / fixed on poles / walls including suitable mild steel Flat Iron clamps of required size and nut, bolts and washer complete all as specified & directed .

M&L for boring holes (manually) under road ,hard standing,without damaging surface for 50 mm dia GI pipe etc complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

Supply and fix CRCA sheet metal enclosure 3mm thick, powder coated, IP-42 protection, front opening, comprising one incommer MCCB 125 Amp 25 KA,4 Pole , 05 saperate compartment for energy meter to be housed with locking arrangement and 05 Nos MCB SPN 63 Amp 10 KA , 04 Nos copper busbar suitable for 200 amp strip type,complete prewired with 10 sqmm copper wire with suitable size lugs, duly housed on wall with grouting 10mm dia stainless steel nuts and bolts, including earthing link, Phase indicator, Amp meter, volt meter digital type, MCB SPN-05 Nos all as specified and directed by Eng-in-Charge.

M&L for two single core (submain) FRLS PVC insulated copper cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM.

(a) 2x10.0 sq. mm + 1x10.0 sq. mm earth wire

(b ) 2x6 sq. mm + 1x6 sq. mm earth wire

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-42), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,SP and N 12 ways ,220 volts complete all as specified & directed. Note:- MCB/ shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified & directed..

Supply and fixing in replacment of 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles & Neutral and current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning all as specified & directed..

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade concealed in the wall/roof, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conduit with all fixing accessories of 20 mm dia, and making good to match with the existing surface of wall complete all as specified and directed for the following :-

(a) One light/fan/bell point controlled by one switch

(b) One point for socket outlet 5 amps on independent board

(c) One point for socket outlet 5 amp same board

(d) One bell/ buzzer point controlled by one push button on the same board with other switches or independent

Description same all as per Serial item No 177 above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire complete all as specified and directed.

S&F ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.

S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.

S&F call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S&F modular switch 1 way, 6 amps, 230V AC, one module complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch one way 16 amps, 230V AC one module complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, two module complete complete all as specified & directed.

S&F Modular metal flush box of 6 module complete all as specified and directed.

S&F Modular metal flush box of 4 module complete all as specified and directed.

S&F Modular metal flush box of 3 module complete all as specified and directed.

S&F Modular white plate cover with frame of 6 module complete all as specified and directed.

S&F Modular white plate cover with frame of 4 module complete all as specified and directed.

S&F Modular white plate cover with frame of 3 module complete all as specified and directed.

S&F modular bell push 6 amp, 1 module 230V AC complete all as specified & directed.

Taking down carefully existing ceiling fan/Exhaust Fan and M&L for refixing the same with nuts, with lock type split pin spring & plate washers etc after paitning and oiling/greesing complete all as specified & directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified & directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix Power unit consisting of one 240 volt 25 Amp 10 KA SP MCB, one 25 Amp sockets and one 25 Amp plug top prewired cmplete all as specified and directed.

S&F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,20 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps all as specified and directed.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F LED light fitting 10 Watt bulkhead luminaires in high pressure die cast aluminium housing, lumen out put - 700 Lm, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fix decorative LED fittings wall mounted with LED lamp opal glass shade esthatic look with premium synthatic and metal combination including 10 watt LED bulb including connection and fixing arrangement complete all as specified & directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Taking down carefully sub main wiring of any Nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete all as specified & directed.

S&F for hindware ripple 90 auto clean wall mounted chimeny with stainless steel baffle filters, push button control and five year warranty on motor complete all as specified and directed.

Taking down the geyser from existing position after disconnecting electrical and water supply connection with out any damage for repair/general cleaning/overhauling,two coat of synthatic enamel paint, cleaning and descaling the inner tank and assembly with suitable chemical/detergent and making the geysers fully serviceable and refixing the same in new/old position and testing complete all as specified and directed.

S&F VTPN 8 way DPX³ with double door type As per IEC 61439-3, Suitable for Surface Mounting, With 250 A with Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, incl provn of MCCB of capacity 160 AMP as incomer fixed in the DB Reversible Door , MCB's as outgoing with metal door complete all as specified and directed.

S&F in replacment of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 25 KA complete all as specified and directed.

Taking down energy electric meter(KWH) and re-fix the same complete all as specified and directed.

NEHA INFRASTRUCTURE & COMPANY

imran construction company

M/S CHANDRIKA PRASAD AND SONS

Channa Brothers and Co.

DINESH ELECTRICALS

M/S Garg Sons

SHIV SHANKAR MISHRA