Annual Maintenance of bore well repair of pump, Motor, Panel board and other accessories from ward no.12 to ward o.23 in TMC Vijayapura Limit

Annual Maintenance of bore well repair of pump, Motor, Panel board and other accessories from ward no.12 to ward o.23 in TMC Vijayapura Limit

Rewinding of submercible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials, labour, equipment and...

For all types of submercible pumpsets above 3.0 HP and upto 5.0 HP

For all types of submercible pumpsets above 7.5 HP and upto 8.0 HP

For all types of submergible pumpsets above 10 HP and upto 11 H.P.

For all types of submercible pumpsets above 15 HP to 20 HP

Replace the components of submercible pumpsets, requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labour, equipments and test...

The Intermediate Piece (IP) with IP Leaded bronze brush

The Oil Seal and Steel bush

The Impeller (Shell moulded with aluminium & bronze)

The discharge outlet (DO) bearing DO Steel bush DO bearing

The steel bearing bush (DO steel bush)

The allen screw

The pump shaft made out of stainless steel counterless ground with key way ( upto 8 stages) Extra for each stage @ Rs.40/-

The Pump Key (Stainless Steel)

The pump coupling (Stainless Steel)

The Non Return Valve (NRV) assembly complete with rubber 'O' ring

The Cable Guard

The Brass Filter

The Labour Charges for overhauling of the pumpset

Replace the components of motor parts of submercible pump sets, items requiring replacements decided by the departmental officials, with respective make of damaged ones, including all materials, labou...

The Stator of Motor 4.0 to 5.0 H.P

The Rotor of Motor upto 3.0 H.P

The Rotor of Motor 3.0 to 4.0 H.P

The Rotor Motor 4.0 to 5.0 H.P

The Rotor Motor 4.0 to 5.0 H.P

The Upper Flange

The Lower Flange

The Upper / Lower Housing

The Carbon housing

The Carbon housing (Thrust Bearing block assembly complete with segment bearing pad)

The Carbon housing (Tip Carbon/Ferrode Padding)

The Studs and Nuts

The Gun Metal Bearing, centrifugally cast Aluminium Bronze bearing brush

The Motor base with pin

The Transportation of pumping machinaries

The Re-errection charges of pumping machineries including overhauling and painting

The Lifting of submersible pumpset from well

The Labour Charges only for overhauling

Supplying and fixing of LED type panel board indicating

lamp with required colour suitable for 230/440VAC. 50 Hz

Supplying, fixing and wiring 3 Phase Digital Ammeter /

Providing terminal plate as per ISI specifiction with guarantee period

of not less than 12 months(BWSSB VOL-5 S.NO:13.52) terminal plate 7.5 to 12.5

terminal plate 15 to 30

Logging / scanning of borewell at any depth continuously with the help of Logger unit including the cost of transportation charges, crew charges, stationery charges and cost of consumables etc.

Supplying and fixing of porcelain fuse channel with cut out 100 Amps on existing wooden/panel using necessary nuts, bolts, and washers etc complee (32/3)( KPTCL 2023-24 Vol:6, Utilization P-14/...

Supplying,fixing and wiring 0to 100A Direct Reading AC analogtype Ammeter( KPTCL VOL-6 S.NO:5.24)

Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 metres(BWSSB VOL-5 S.NO:2.2 ) Pipes of dia 32mm to 80mm

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Supplying and fixing HRC fuse units base on existing switch /panel board. 100 to 300 A

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 S...

Lifting of struck up submersible pump set. Above 300 ft (BWSSB SR 2023-24 Vol-5 , P-142/ I-12.27)

Providing wrought mild steel (galvanized) 50 mm dia GI elbow confirming to IS 1239-II, 1991 with latest amendments if any.