Repair/Maint of Misc Steel Furniture including Painting and Polishing at Technical Area, AF Stn Mamaura

Amount

Taking out all old U/S material (Nylon Newar/Plywood) from Charpoy GI pipe and cleaning of dust, wax, grease and replacing the damaged legs/short rails and elbow etc and making good the frame duly tighten the all loose joints of legs/long/short rails and make good the frame in original shape for reweaving purpose complete all as directed.FD-220 Note : Parts/components replaced shall be measured and paid under respective items.

Supply only GI Elbow 32mm dia 3 way heavy duty ISI marked FD-220

Supply only check nut 32mm dia heavy duty ISI marked FD-220

Supply only long rail of GI pipe 32mm dia medium grade FD-220

Labour for cutting the long rail in short rail legs size threading and fixing the frame of charpoy GI pipe complete all as specified and directed.FD-220

Supply and fixing 12mm thick ply wood commercial BWR 07 ply plywood (Make as approved by Engr-in-Charge) and fixing same with two Nos of flat iron strip of size 900mm x 32mm x 5mm, bolts, nuts and washers, bolts of size 5x65 mm- 10 Nos round head bolts after drilling the three hole of each long rail and drilling the two hole on each short rail including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing including two coat of syntetic enamel paint over a coat of redoxide on the the iron strip complete all as per specified and as direction by Engineer-in-Charge FD-220.

Taking out old U/S worn/damaged and perished cloth velvet long cloth, cloth markine, cloth hassian core fibre, Nylone/cotton cords, sofa spring etc from sofa set spring type 5 seater and replacing/resetting all old U/S loose and damaged sofa spring of seat and back with adjustment/tighten through cotton cord 1/8" (3mm) dia in parallel/vertical direction and reassembling the sofa chair by S&F new materials velvet cloth not less than Rs 450/Sqm and Hession cloth jute cotton including duly approved by GE for its color, quality, print and design and this including polishing all around two coats on legs rest all as per specified and shown on their respective drgs and directed by Engineer-in-Charge.FD-18 NOTE : Payment of sofa spring shall be paid seperately under respective item.

Supply only Sofa spring of hard plain GI wire 3mm dia used above for seat size 150 mm high, all as specified and shown on respective drgs and as directed by Engineer-in-Charge.FD-18

All as per item No 9 above here in before but for back of sofa chair and size 100mm high complete as directed by Engineer-in-Charge. FD-258

Taking out all old U/S worn/perished tapestry cloth seat cover only from Sofa Set 5 seater x 3 Pcs DRC Set seat and back of tapestry cloth not less than Rs 200 per Sqm on approved colour quality, print and design approved by accepting officer all as specified and shown on respective drg. FD-18

Taking out old U/S material from all type of steel table and supply of new top of 18/19mm thick veneered MDF board phenol formal dehyde synthetic resin bonded as approved by Engr-in-Charge and fixing the same by high class furniture cabinet maker including teak wood edging of colour shade to match the surface all as directed by Engr-in-Charge.FD-84

Taking out all old damaged and U/S lever lock from door of Almirah steel large and medium and providing 5 to 7mm brass lever lock with duplicate key Godrej parttern duly tightened with machine screw steel with nuts including welding if required all as directed and specified and shown on drg.FD-243 FD-67

Taking out all U/S damaged clamps from shelves of Almirah/lockers/cup board boards and S&F new clamps as per old one as required for adjusting the shelves as directed by Engr-in-Charge including two coats of synthetic enamel paint complete all as specified.FD-243 FD-68

Taking out old U/S damaged handle from Almirah steel large and medium and S&F new one of same length and size and shape chromium plated cast iron handle of Godrej pattern and shall be fitted by using nut and bolts complete all as directed by Engr-in-Charge.FD-243 FD-67

Taking out old U/S damaged lever lock from drawers and shutter of all type steel table and providing 5 to 7mm brass lock with duplicate key Make Godrej pattern and shall be fitted with machine screw complete all as spcified and directed.FD-84

Repair of drawers of Table steel Clk/Officer by making smooth functioning and painting with OG paint to match with existing surface complete all as directed by Engr-in-Charge. FD-84 FD-84M

Gas welding with brass rods including preparation of surface by derusting, scrapping and cleaning as required for welding to damaged parts/components of steel surface of furniture article where required to get it serviceable with smooth functioning all as directed by Engr-in-Charge.

Taking out all old U/S materials from seat and back of chair steel varandah cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and recanning with 4 to 5mm wide and 4mm plastic cane in tighten side and 32 to 34 bends on around the frame end recanning with 4 to 5mm weaving side rest all as specified and shown on drg and all as directed by Engr-in-Charge.FD-256

Supply and fixing of hand rest of 1st class hard shisham wood duly white painted for chair tube steel varandah all as directed.FD-75M

Supply & fixing of new rubber shoe/ cap plastic for steel varandah chair.

M&L cleaning, dusting, cobs, grease, wax etc from almirah steel medium with shelves derusted the rusted portion/parts up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.FD-67

All as per item No 21 here in before but almirah steel large with shelves.FD-243

M&L cleaning, dusting etc from chair tube steel with arms derusted the rusted portion/parts of up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.

All as per item no. 23 here in before but for chair tube steel w/o arms

Taking out unserviceable damaged seat frame from chair tube steel CB with arms and replace the same with new with 1st class hard wood shisham well finish painted with two coats synthetic enamel paint over a coat of pink primer duly caned in Godrej pattern with white colour cane 2.5 mm wide and 0.3 thick & border with 3 to 3.2 mm wide & 0.4mm thick cane half round all as directed by Engineer-in-charge

All as per item no. 25 here in before but for back frame

All as per item no. 25 here in before but for seat frame to chair tube steel w/o arms

All as per item no. 25 here in before but for back frame to chair tube steel w/o arms

m/s pal associates

M/S WALIA TRADESRS

BAJAJ CONSTRUCTION