REPAIR TO CARTAIN ROADS INCLUDING ROAD FURNITURE ETC AT SUNJUWAN MIL STN UNDER GE JAMMU

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud , or water, scoring sunken surfaces in roads, paths , etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal ) but making good by applying tack coat @ 5 kg per 10 sq m , putting in premixed bitumenous macadem, well rammed and sealed with binder 9.8 kg per 10 sqm , blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed ( including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and as directed

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-10) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 10 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.

Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and as directed

Material and labour for hot applied thermo setting road marking paint 2mm thick in shapes/ signs as required including preparation of surfcaes and glass beads retro reflective type as per ASTM standards complete all as specified and as directed

Supply and fix repairs solar road studs having 3 LED of colour Red / Yellow to side cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed

Cat eye solar reflactive type metal body alloy of size 100mm x 100 x20mm with PAMA striplene reflector of model No- DA 972.0 fixed with and incl MS stud of suitable size as per manafacture instruction , complete all as specified and as directed

Metal tubular dealinator made out of ABS round body fitted with 2 nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastome 3 bands pf green red and yellow reflector radium type of 25mm wide strips with anti theft steel net for reflector protection incl embedding in PCC 1:2:4 150X150X300mm type B1 complete all as specified and as directed

Taking down old unserviceable sign boards of any description incl frame work from ground surfaces complete all as specified and as directed

Excavation in post holes (or similar holes) each not exceeding 0.5 Cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface for in any type of soil soi complete all as specified and as directed

PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and as directed

50mm dia stainless steel pipe made out of 1.80mm thick superior quality steel sheet , as in frame structure of sign board including cutting , seamless welding and framing complete all as specified and as directed

Retro reflective , double sided road sign boards comprising of 4mm thick aluminium composite panel (ACP) sandwiched with 0.50mm thick micro prismatic retro reflective sheet and electro cut coloured overlay film ,ACP sheet shall be routed folded and fixed to frame with 24mm ,wide and 2.3mm thick VHB tape provided all around the frame incl riviting at right angle face of the frame with POP riveting or with self taping stainless steel screws 5mm dia , spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame , micro prismatic reto reflective sheet conforming to type -XI of IRC 67: 2012 sheel be pressure fixed as backround sheet on both side of ACP which will be over laid with electro cut transparent film of approved make and colour to create a desired name information message incl all materials required for fabrication , ereaction and installations and fixed to steel frame all as specified and directed. Note Stainless steel frame shall be measured and paid seperately under respective item complete all as specified and as directed

Repairs road safety 800 mm dia convex polycarbonate acrylic unbreakbale mirror fixed over and incl 2100mm height above ground level of 75mm dia stainless steel pipe above road surfaces fixed in ground with PCC (1:2:4) minimum 450mm deep in ground complete all as specified and as directed.

Preparation of old Concrete surfaces ( kerb stone. parapet wall) and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete all as specified and as directed

75 mm thick PCC type D-2, 1:4:8 (40mm aggregate) in floor as sub base complete all as specified and as directed.

Coloured chequered tiles of size 30cmx30cmx 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement & pigment etc and Screed bed or bedding layer of mortar 20mm thick (1:4) for laying floor finishes complete all as specified and as directed

PCC type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and as directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed

Providing and laying at or near ground level factory made kerbstone of M-25 grade cement concrete in position to the required line, level and curvature, joined with cement mortar 1:3 ( 1 cement : 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm ) , including making drainage opening wherever required complete all as specified and as directed

M/S VED PAUL MAHAJAN (BID ID -3326030)

s s construction (BID ID -3329235)

M/S SAINT SOLDIER ENGINEERS & CONTRACTORS PVT LTD (BID ID -3329015)

CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3329471)