61/SE/C-III/RB/KMDA of 2025-26, Dt.-11/03/2026 (2nd Call), Sl. No. - 07

Type - B, "THRIE" : Metal Beam Crash Barrie Providing and erecting a "Thrie" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per Clause 811.3 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)

Supplying and laying in the specified pattern of nterlocking concrete pavement (ICBP) with concrete blocks (with concrte grade as specified as per table 1 of IS 15658:2006) manufactured from BIS license manufacturers, with spacer nib (small producing profile on the vertical face of a paver block used as a device for keeping minimum joint gap in between the paving blocks, as per Cl. No. 3.26 of IS:15658) and of specified size and shape with aspect ratio( the ratio of lengh to thickness of a paver block, as per clause no 3.3 of IS:15658) as per table 2 of IS;15658 with flexural strength / breaking load as per annexture G of IS:15658 on the prepared base course of specified CBR as per table 1 of IRC SP 63(2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25 to 35 mm thick (grading of the bedding sand as aper clause 6.5.1 of IRC SP 63) and filling up the gaps in between paver blocks with joint fillings sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP63) and completing the edges with cut blocks as per clause no.8.7 of IRC SP:63(2018) with proper confinement of bedding and joint filling sand, compaction and leveling and filling up of the edge gaps. 25 mm thick 2) Coloured decorative

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportion

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. (i) 150mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed (i) 150mm diameter

Labour for fitting and fixing 10 cm. to 13 cm. diameter Sal-bullah/Eucalyptus-bullah as ties and runners including necessary nails, bolts and nuts.

Walling or roofing fitted and fixed complete with cut drum sheets including the cost of drums, cost of cutting drums and flattening the sheets and cost of necessary nails and screws.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

GST @ 18 % on Sl No 1 to 09