SPL REPAIRS TO ROOF SHEET OF BLDG NO P 266 P 267 P 268 AND P 276 AT 16 RAJPUT AND STATIC WATER TANK AT FASF OF 41 INF BDE UNDER GE EAST LUCKNOW

Amount

Dismantling AC sheet (Corrugated, Semi Corrugated etc) as in roofs etc including ridges complete all as specified and directed.

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed.

S&F of pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in room covering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to Grade Fe 410W (Gde E-265 quality `B’ complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius in CM 1:4 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 with on fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old/new surfaces of wall & applying two coat of cement base paint of approved shade/tint complete all as specified and directed.

M&L for preparation of old/new plaster surfaces with three coat of white wash on wall surfaces etc complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed.

M&L for reinforced cement concrete 1:1½:3 (Nominal mix) using 20 mm graded aggregates as in slabs supported on wall smixed with liquid water proofing compound @ 200 ml per bag cement complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for TMT 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil.complete all as specified and directed.

M&L for hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) for sub base complete all as specified and directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

suniltraders (BID ID -3295702)

M/S SWATI CONSTRUCTION (BID ID -3296116)

M/S Reliance Construction (BID ID -3296077)

Mohan Builders (BID ID -3294534)

NEW BHARAT ENGINEERING AND CONSTRUCTION CO (BID ID -3295830)

QUALITY CONSTRUCTIONS CO (BID ID -3296388)

jayanti associates (BID ID -3295225)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3296331)