WBPHED/DIC/BMSD(D)/NIeT-3 of 2025-26_1

Amount

Dismantling all the switch gear items along with all of the electrical power circuit (from busbar to all the contractors) and control circuit (for diffrent switch gear items) routing making necessary cleaning of the all the different feeder of 7 nos low lift and 2 nos high lift by dismantling the existing fixed board (on which the switch gears were fixed) and checking faults of the above said items by prident electrician by proper elecrtical & electronics instruments as needed to complete the work as per direction of EIC

Fault finding of different feeders switchgear items,lamp,push buttons,capacitors & others items in MCC Panel at site.

Supply delivery of the following items for 1.5 KW DOL submersible Motor feeder panel

3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT (18A) Make-ABB/Approved

NC CONTACT BLOCK FOR ABOVE CONTACTOR (18A) Make-ABB/Approved

415V AC UNDER VOLTAGE/OVER VOLTAGE/SPP MONITORING RELAY Make-GIC/Approved

150Amp POWER TERMINAL 3 WAY

Supply delivery of the following items for 50 KW SDS feeder(for High lift) panel

160A, 25KA MCCB,TP,T/M BASED WITH O/L,S/C TRIPS (Make-ABB/BCH)

ROM FOR ABOVE MCCB

95A, 3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT (Make-ABB/BCH)

NO CONTACT BLOCK FOR ABOVE CONTACTOR

NC CONTACT BLOCK FOR ABOVE CONTACTOR

80A,3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT (Make-ABB/BCH)

NC CONTACT BLOCK FOR ABOVE CONTACTOR

230V AC STAR-DELTA TIMER (Make-GIC)

230V AC INDICATING LAMP (RED-1,GREEN-1,AMBER -2)

6A NORMAL PUSH BUTTON WITH NC (RED)

6A NORMAL PUSH BUTTON WITH NO (GREEN)

415V AC UNDER VOLTAGE/OVER VOLTAGE/SPP MONITORING RELAY (Make-GIC)

100/5A CURRENT TRANSFORMER CL-1,15VA (FOR AMMETER) (Make-Kappa)

0-100A DIGITAL AMMETER 96 SQ. MM. (Make-l & t/Rishab)

15KVAR CAPACITOR NORMAL DUTY,415V AC Make-EPCOS

40A 3P POWER CONTACTOR 240V AC COIL WITH NO CONTACT (Make-ABB)

230V AC ON-DELAY TIMER (Make-EPCOS)

40A TP MCB (FOR CAPACITOR) (Make-ABB)

0.5-60A DIGITAL MOTORPROTECTION RELAY (EOCR/BOCR) (Make-BCH/Schneider)

100/5A CURRENT TRANSFORMER CL-1,15VA (FOR MPR) (Make-Kappa)

400A POWER TERMINAL,4WAY

Supply delivery of the following items

1.5 SQ MM WIRE (FRLS)

2.5 SQ MM WIRE (FRLS)

25 SQ MM WIRE (FRLS)

35 SQ MM WIRE (FRLS)

Related Hardware for rectification (pin,fork,ring socket,ferrule, R/YB PVC Tapes,cable tie100mm,cable ducts,metal sheets, nuts, bolts,washers etc. board for fixing items etc ) of 1 nos. centrifugal feeders and 7 nos 1.5 Kw DOL submersible feeder of parsala W/s Scheme with complete new wiring to both the control and power circuit to complete the job as per direction of EIC

Rectification of MCC panel with cutting the old damaged wire and supply of new wiring of panel board including rectification of including changing of Red/Yellow/Blue & Black Insulation Tape with other electrical equipments fittings complete at PARSALA W/S SCHEME

Installation of the above switch gear items and making complete connection of all the control and power circuit of all the centrifugal feeders and 1.5 kw Dol submersible feeders by proper prudent electrician and testing commissoining up to a certain period of operation upto the satisfaction of EIC, as per direction of EIC .

Add: 18% GST

Add: 1% Cess

COMBINE ENTERPRISES (BID ID -6698146)

TAPAN KUMAR DEY (BID ID -6698108)