Loading…
Loading…
Tender Value
Refer Docs
Closing Date
9 Dec 2025, 11:30 amClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
LP
2 conditions
Dealership /Authorisation: Manufacturers or their authorized Distributor/ Dealer/Agent with Tenders speci%uE046c authorization can only quote. OEMs can authorize and give Tender Speci%uE046c Authorization to its Agent / dealers to quote on their behalf provided the vendor takes full responsibility for the quality of the material including warranty obligation and after-sale-service. In such cases the authorized agents / distributors would also give an undertaking asfollows: (i) That he will be responsible for all the contractual obligations including quality aspects, replacement of parts / items and Warranty / Guarantee obligations. (ii) That he will be responsible for after-sale-service. (iii)The o%uE029er without Tender Speci%uE046c Authorisation Letter will be summarily rejected. For details Please see the para 2.4 of Special condition of contract of Uni%uE046ed tender document (Rev-02 of Sept-20. For details, Please see the para 2.4 of Special condition of contract of Uni%uE046ed tender document (Rev-02 of Sept-2019) [a] Tenderers are hereby instructed to supply the tendered quantity to the respective consignee(s) as indicated in tender document. [b] If tenderers mention anywhere in its o%uE029er contrary to (a) above and/or mentions not to supply to some of the consignees, such o%uE029er may not be considered for ordering for such consignees where the tenderer has not agreed to directly deliver the stores without any back reference.
Performance Clause: Tenderers must submit performance documents such as copies of recent Purchase Orders for the tendered item or similar items received from any Zonal Railways /PUs with Receipt notes. Please note that non submission of such documents shall be taken as they are not having any such past performance and their o%uE029ers shall be considered further as per extant rules. i) The tenderer with past performance of satisfactory execution of contracts as mentioned above for supply of the same items for a quantity of 20 percent or more of tendered quantity against a single contract during last three years prior and to excluding, tender opening date may be considered [as responsive to N.F Rlys requirements] for placement of regular order. ii) If such past performance level is lower, then the o%uE029er may be considered [as responsive to N.F Rlys requirements] for placement of development order not exceeding 20 percent of the net procurable quantity. For consideration of such development orders, the tenderers who have no past performance as above, must along with their quotation submit the NSIC for the same item
20 conditions
CHECK LIST OF DOCUMENTS TO BE ATTACHED WITH E-TENDER: Please see and comply Para 3.8; INSTRUCTIONS FOR TENDERERS of UNIFIED BIDDING DOCUMENTS (Rev- 02 of Sept-2019).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items and 100 for fully indigenous item. The de%uE046nition and calculation of local content shall be in accordance with the Make in India policy as per attached documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Assam · 200 Numbers total
Brushless Motor Ceiling Fan,
PN251020~NFR
PN251020
Limited - Indigenous
Goods
Assam
₹0
Exempted
9 Dec 2025
4 Dec 2025
1 item · 200 Numbers total
Brushless DC (BLDC) Motor Ceiling Fan, ISI marked, Sweep size: 1200 mm, Minimum Air delivery-210 Cubic Meter/Min, total harmonic distortion- 8% [max], Rated Voltage: 230 V, 50HZ Single phase AC, Speed control with electronic regulator (step type with minimum 5 running positions), Blad e thickness (Min): 1.1mm, Blade material : Aluminum, Bearing : Double ball bearings, Down rod size ( without shackle) : 300mm, Shank & Shackle thickness (Min) : 2mm, canopy : 2 nos., colour standard: white, BEE rating : 5 star (as per BEE%u2019s amendment to Schedule 8 for Ceiling fans Rev.2 dt. 08. 08.2019), Rated power-28 watt [max], Warranty [Min] 2 years. Conforming to- (i) IS: 374/2019 (ii)IS:3 02 (Part 2/Sec 80) - For safety requirement. (iii)IS:14700 (Part 3/Sec2) for THD (iv)The firm has to sub mit type test report from Government accredited test labs like NABL/CPRI etc. along with the offer. (v) Routine test Certificates has to be submitted along with supply. (vi) Acceptance test shall be carried o ut by Inspection Agency as per IS 374. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PNO GSD, NFR | Assam | 200.00 Numbers |
| Total | 200 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5613717.pdf
ATTACHMENT
5613716.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .