Civil Repair and Renovation works at Compressor House Pattern shop office area including other factory locations in Foundry and Forge Division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

DURATION : 6 Months

Specification of item

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling/Taking out doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead as per direction of Engineer - in - charge. : Of area beyond 3 sq. Metres

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead as per direction of Engineer - in - charge.

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in RS Joists.

Refixing old glass panes with putty & nails, including cost of scaffolding, cost of putty & nails, labour etc. complete, as per the direction by Engineer-in-charge.

Renewing Glass panes, with putty & nails, wherever necessary including raking out the old putty:- Float Glass panes of 5mm nominal thikness (weight not less than 12.50 Kg/ sqm. complete as per directions of Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, complete as per directions of Engineer-in-charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge:- With cement mortar 1:4 (1 cement : 4 fine sand)

Cement concrete 1:2:4, (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural resources)

Brickwork with common burnt clay machine moulded perforated F.P.S.(non modular) bricks of class designation 12.5 conforming IS : 2222 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor V level

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood Frame

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and Fixing IS 12817 marked stainless steel butt hinges of size 125x64x1.90mm with stainless steel screws etc

Providing & fixing Aluminium tower bolts 200 X 10mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts & screws etc. complete

Providing & fixing Aluminium handles 125mm, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts & screws etc. complete

Providing & fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete

Providing & fixing brass 100mm mortice latch & lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more etc., complete as directed by EIC

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. all complete as directed by EIC. Note: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after successful completion of 5 years from the date of completion of contract/ project as a whole.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : a) Ridges plain (500mm - 600mm)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :b) Crimp curve

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified by Engineer in Charge

FORM WORK:Centering and shuttering including strutting, propping etc. and removal of form for "Foundations, Footings, bases of columns etc. for mass concrete"

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size: Size of Tile 600 x 600 mm

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with pre-cut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if required, fixed with Glavanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.With 15 mm thick Tegular edged light weight calcium siliciate false ceiling tiles

Painting with synthetic enamel paint (wood/steel surface) of approved brand and manufacture of required colour to give an even shade:- two or more coats on new/old work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer including necessary scaffoding 7.0m ht. etc complete as directed by EIC

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content - With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre - including labour, material, scaffolding, safety equipments etc.complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete - including labour, material, scaffolding, safety equipments etc.complete

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour -Two coats - including labour, material, scaffolding, safety equipments etc.complete

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.a) For New/old work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, including labour, material, scaffolding, safety equipments etc.complete

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). Turbo base Sheet 0.71mm Aluminium Circular (sinusoidal) profile with center to center pitch of 75 mm, depth of 19 mm, overall profile width 1250 mm, cover width 1150mm.

Providing and installing powder coated aluminium glazed partitions & fixed ventilator with outer frame verticals and horizontal members of aluminium extruded rectangular hollow tube from alloy conforming to designation 63400 of I.S. 737 and temper W.P (H.E.9 W.P) of approved manufacture comprising of the following :a) Powder coated Aluminium extruded rectangular hollow tubes measuring not less than (101 x 44 x 2.0) mm in natural matt finish for door openings, outer frame, intermediate, verticals and horizontals not exceeding at 100 cms. centres (approximately) or at suitable intervals as required bottom panel upto nearly 0.9 mtr height from floor level fixed with 12mm thick approved particle board with integral laminate facing on booth faces with same shade and colour, fine moisture and termite resistant quality. b) Balance panels fixed with 4.5mm thick tinted sheet glass of approved quality, conforming to I.S.2835 in panes including providing PUSH / PULL sticker to glass panes, etc., all complete as directed by EIC. c) Superior quality rubber glazing gaskets and aluminium tapered glazing clips 0.7mm thick and measuring (19 x17) mm self interlocking screwless, snap on type for fixing both side laminated particle board/glazing, etc., all complete as directed by EIC/OIC.

Supplying, fabricating and fixing partly panelled partly glazed, powder coated aluminium single/ double leaf side hung door /sliding doors with powder coated, vertical and horizontal members of standard section of extruded rectangular hollow tubes from high grade HE-9 WP alloy conforming to class designation 63400 of I.S. 737 of approved manufacture comprising of the following:a. Shutter top member shall measure not less than (47.62 x 44.5 x 1.74) mm shutter bottom member shall measure not less than (95 x 44 x 3) mm shutter middle and horizontal members shall meaure not less than (47.62 x 44.5 x 1.74) mm b) Superior quality rubber glazing gasket and aluminium tapered glazing clips measuring (19 x 17) mm self interlocking screwless snap on type for fixing glass and particle board. c) The door frame shall be fitted with neat and efficient door lock, handles, tower bolts, rubber door stoppers, insignia with red colour for glass panels. d) Bottom panel upto nearly 1mtr height from floor level fixed with 12mm thick approved equivalent particle board with integral laminated facing on both faces with same colour and shade, fire, moisture and termite resistant quality etc., e) Balance panels fixed with 4.5mm thick tinted sheet glass of approved quality, conforming to I.S.2835 in panes including providing PUSH/PULL sticker to glass panes, etc., all complete as directed by EIC. f) Hydraulic requlated door closer designation 3 with C.I. or anodized aluminium body of "EVERITE" or other approved equivalent where ever required,if the door of sliding wheels run over M.S. 'V' channel / angle grouted in the floor.

Supplying & installation vertical blinds of vista levelor, plain weave louver of size 100mm width with self lubricating carrier, stainless steel spacer 25mm decorative head rail stack release stream line profile snap bracket with high quality plating finished with metallic tilt and chains including coating with scotch guard etc., complete all as directed by EIC

Supplying and fixing following 150/160mm dia UPVC pipes (SWR) of approved manufacture laid as rain water pipe and jointed with rubber ring joints along with chemical solutions including all fittings like bends, tees, supports and chasing in walls, making bores in walls etc., all complete as directed by EIC / OIC.

Supplying, fabricating and fixing Aluminum - glazed Three track sliding windows with powder coated anodized aluminium sections of high grade alloy approved make manufacturer comprising of the following: a) 18mm shutter with top, bottom, and side sections thickness & width to be around 1.29mm & 40mm respectively. b) the bottom section of the frame shall be around (92x45.5 to 38x1.50)mm weighing. c) The top and side frame including the handle side and the interlock side shall be around (92x31.75x1.50)mm to accomodate shutter section of around (40x18x1.29)mm all round The shutter are to be provided with 4.5mm thick tinted glass for two shutters and stainless steel fly proof shutter for one shutter fixed with good quality tapered aluminium interlocking screwless snap on type glazing clip including all fittings like handles, locking arrangements, EPDM gasket with all necessary scaffolding, tools as per approved drawings etc., all complete as directed by EIC.

Supplying and fixing louvered/fixed type anodized aluminium ventilator with powder coated with 4.5mm thick tinted glass without sash bar, aluminium section frame of Jindal/ Indal or other approved equivalent manufacture using U Channel for ventialtors of size (15 x 15) mm with necessary anodized aluminium snap beading, joining cleats, screws, self locking glazing clips, neoprene rubber gasket, etc., all complete as per drawings, specifications and as directed by EIC.

Providing & Fixing Aluminium Wind Driven Rotary Turbo Ventilator of 600 mm dia. with turbine diameter 750mm, over base sheet including labour, material, transportation etc. complete as per the direction by Engineer-in-charge

Rupees Fifteen Lakh Sixty Eight Thousand Eight Hundred Eighteen and Six Paise Only

Approximate Amount Put to Tender

Rupees Two Lakh Eighty Two Thousand Three Hundred Eighty Seven and Twenty Five Paise Only

Rupees Eighteen Lakh Fifty One Thousand Two Hundred Five and Thirty One Paise Only

F/DGM (Mfg)/E-TN/ 48 /394/2025

Sb: Civil repair & Renovation works at Compressor House, Pattern shop office area including other factory locations in Foundry & Forge Division, HAL (BC).

HAL/FNF/CIVIL/R-26/25-26

29AAACH3641R1Z3

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II